levenhuk W30 Weather Station User Manual

: June 5, 2024
: levenhuk

Table of Contents

Base station
Sensor
Discovery Report W30 Weather Station
Getting started
Specifications
Care and maintenance
Battery safety instructions
Levenhuk Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Discover y Report W30 Weather Station

User Manual

Base station

Trend arrow indicators
Indoor temperature
Sensor connection status
Current channel
Outdoor temperature
Wall mount hole
Table stand (fold-out)
MAX/MIN button
CH button
°C/°F button
Battery compartment cover

Sensor

Wall mount hole
Table stand (fold-out)
TX button
Channel switch (1—3)
Battery compartment cover

Discovery Report W30 Weather Station

The kit includes a base station, sensor, user manual, and warranty.

Getting started

Base station
Open the battery compartment cover (11) and insert 2 batteries according to the correct polarity. Close the cover.

NOTE! The base station is operated on channel 1. If the base station should be operated on a different channel, press the CH button to set the desired channel.

Sensor
Open the battery compartment cover (5) and insert 2 batteries according to the correct polarity. Close the cover.

Sensor connection
Place the base station and the remote sensor within the effective transmission range. If the values are not received from a channel, сheck the batteries and try again. Check if there is any source of interference. When changing batteries, replace the batteries in the base unit first and then in the sensor in order to re-establish the connection. If an adapter supplies power to any of the devices, briefly disconnect the power to that device when replacing the batteries. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly. The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little.

NOTE! Although the sensor is weather-resistant, never place it in direct sunlight or in the rain or snow.

Outdoor temperature resetting
Press and hold the CH button if the outdoor temperature needs to be reset. The outdoor temperature of the particular channel will reset and display “——.—”. Press the TX button on the back of the sensor to send a transmission to the base station, and then the current temperature should once again be displayed on the base station.

Temperature units
The thermometer can switch the temperature units between Celsius and Fahrenheit. Press the °C/°F button to change the temperature units.

History record
Press the MAX/MIN button to display the MAX/MIN temperature. To clear the history records, press and hold the MAX/MIN button for 3 seconds.

Low battery indicator
If the low battery indicator is displayed for either the sensor or the base station, immediately change the batteries.

Trend arrow indicators

The temperature trend indicator shows the trends for the forthcoming few minutes. Arrows indicate a rising, steady, or falling trend.

Specifications

Base station

Temperature, units of measurement| °F, °C
Operating temperature range (indoors)| 0… +50°C (+32… +122°F)
Weekday display language| English
Screen| monochrome
Power supply| 2 MA batteries (not included)
Sensor

Radio signal frequency| 433MHz
Radio signal radius| 30m (98ft.)
Operating temperature range (outdoors)| -40… +70`C (-40… +158’F)
Power supply| 2 AAA batteries (not included)

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications.
Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately. Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and –). Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk Warranty

Levenhuk products, except for their accessories, carry a 2-year warranty against defects in materials and workmanship. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date.
The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.
For further details please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

© 2022 Discovery or its subsidiaries and affiliates. Discovery and related logos are trademarks of Discovery or its subsidiaries and affiliates, used under license.
All rights reserved.
Discovery.com

Levenhuk Inc. (USA): 928 E 124th Ave.
Ste D, Tampa, FL 33612, USA,
+1-813-468-3001,
contact_us@levenhuk.com.

www.levenhuk.com