Ferrari F458 Spider Racing Wheel User Manual

: June 5, 2024
: Ferrari

Table of Contents

TECHNICAL SPECIFICATIONS
Documents / Resources

Ferrari F458 Spider
Racing Wheel

User Manual

TECHNICAL SPECIFICATIONS

Tabletop attachment system
Attachment screw
Pedal set cable
USB connector for pedal set
USB connector
Xbox Guide button + white LED
Controller pairing LED for Kinect

ADJUSTING THE RACING WHEEL’S SENSITIVITY IN GAMES
Your racing wheel offers four sensitivity levels:
– 1 = NORMAL (default) – 2 = LOW –
– 3 = VERY LOW – 4 = MINIMUM

To adjust the racing wheel’s sensitivity setting, press the four following buttons simultaneously, then release them:
Lever DOWN (LB) + Lever UP (RB) + Button Y + Button B
(the racing wheel’s white LED flashes, according to the selected sensitivity setting)

Racing wheel sensitivity setting (LB+ RB + Y+ B)	Flashing white LED
Sensitivity setting 1 = NORMAL	Once
Sensitivity setting 2 = LOW	Twice
Sensitivity setting 3 = VERY LOW	3 times
Sensitivity setting 4 = MINIMUM	4 times
Sensitivity setting 1 = NORMAL	Once

Note: changes made to the sensitivity setting are not saved. and must repeat every time you restart or disconnect your racing wheel.

SETTING UP THE RACING WHEEL

Attach the racing wheel.

Place the racing wheel on a table or another flat, level surface.
Place the attachment screw (2) in the attachment system (1), then insert the attachment device into the relevant hole located beneath the racing wheel, until the racing wheel is perfectly stable. Do not overtighten the screw; this could cause damage to both the attachment system and the table.

Connect the pedal set

Connect the pedal set cable (3) to the racing wheel’s connector (4).

SETTING THE RACING WHEEL UP FOR YOUR XBOX ONE I XBOX SERIES XIS

Plug the USB connector (5) into one of the console’s USB ports.
Power on the console using the XBOX button located on the console or the racing
The white LED lights up automatically when your racing wheel powers up.
Connect to your profile using the racing wheel’s buttons.
Start the game using the racing wheel’s buttons.

For safety reasons, do not use the pedal set with bare feet or when wearing only socks.

THRUSTMASTER® SHALL NOT BE HELD RESPONSIBLE FOR ANY PHYSICAL INJURIES OCCURRING WHEN USING THE PEDAL SET WITHOUT SHOES.

You are now ready to play!

TROUBLESHOOTING AND WARNING

My racing wheel doesn’t work correctly or seems incorrectly calibrated.
1. Power off the console.
2. Unplug the power cable located at the back of the console (the console’s power supply LED turns ORANGE).
3. Leave the racing wheel connected to the console.
4. Reconnect the power cable located at the back of the console (the console’s power supply LED turns WHITE).
5. Power on the console again using the XBOX button located on the console (do not use the XBOX button on the controller).
6. Start the game using the racing wheel; be careful not to turn the controller on!
To avoid any calibration problems:
Never turn the wheel or press on the pedals when connecting the racing wheel or starting a game.
Always connect the pedal set to the racing wheel before connecting the racing wheel’s USB connector to the console.
I cannot configure my racing wheel.
In games, access the Options / Controller menu, then select the most relevant
Please refer to your game’s user manual or online help for further information.
Connect tohttps://support.thrustmasterscom/. In the Racing wheel/Ferrari 458 Spider section:
Review various FAQs and hints on how to use games for Xbox One / Xbox Series XIS with your racing wheel.
Access the list of games compatible with the racing wheel (this will be regularly updated).

When playing these games, do not hesitate to test and compare the four sensitivity settings offered by your racing wheel.

WARNING: This product can expose you to chemicals including Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

5078768