G3 FERRARI FS40-6R Libeccio Remote Stand Fan User Manual
- June 4, 2024
- G3 FERRARI
Table of Contents
G3 FERRARI FS40-6R Libeccio Remote Stand Fan
Product Information
Specifications
- Model: G50046
- Technical Model: FS40-6R
- Type: Stand Fan
- Brand: LIBECCIO REMOTE
- Website: www.g3ferrari.it
Product Usage Instructions
Safety Guidelines
- Ensure the appliance is not exposed to rain or moisture to avoid electric shock.
- If the appliance is to be discarded, render it unusable by cutting the power cord.
- Avoid handling the appliance with wet hands or bare feet.
- Keep the product and power cord out of reach of children under 8 years old.
- Do not attempt to repair the appliance if damaged; seek assistance from an authorized service centre.
Installation and Usage
- Follow the assembly instructions carefully.
- Do not immerse the product in water or other liquids.
- Avoid placing anything in the protective grilles or obstructing them.
- Position the fan on solid and stable surfaces away from windows or drafts.
Care and maintenance
- Disconnect the power plug before cleaning the product.
- Avoid spraying liquids on the product.
- Use only original and compatible spare parts and accessories.
FAQ
- Q: Can the fan be used outdoors?
- A: No, the fan should not be exposed to outdoor conditions such as rain or extreme humidity.
- Q: Can children operate the fan?
- A: Children should not play with or operate the fan. Keep it out of reach of children under 8 years old.
WARNING
ELECTRIC SHOCK RISK DO NOT EXPOSE TO RAIN OR MOISTURE
Symbols
- This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.
- Class II Appliance symbol. The double-insulated electrical appliance has been designed in such a way that it does not require a safety connection to the electrical earth/ground.
- Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner’s guide.
SAFETY INSTRUCTIONS
The following are important notes on the installation, use and maintenance; save this instruction manual for future reference; use the equipment only as specified in this guide; any other use is considered improper and dangerous; therefore, the manufacturer cannot be held responsible in the event of damages caused by improper, incorrect or unreasonable use. Before use, ensure the equipment is undamaged; if in doubt, do not attempt to use it and contact the authorized service centre; do not leave packing materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within reach of children as they are potential sources of danger; always remember that they must be separately collected. Make sure that the rating information given on the technical label is compatible with those of the electricity grid; the installation must be performed according to the manufacturer’s instructions considering the maximum power of the appliance as shown on the label; an incorrect installation may cause damage to people, animals or things, for which the manufacturer cannot be considered responsible thereof. If it is necessary to use adapters, multiple sockets or electrical extensions, use only those that comply with current safety standards; in any case, do not exceed the power consumption limits indicated on the electrical adapter and/or extensions, as well as the maximum power, is shown on multiple adaptors. Do not leave the unit plugged in; better to remove the plug from the mains when the device is not in use. Always disconnect from the power supply if you leave it unattended. Cleaning operations should be carried out after unplugging the unit. If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting the power cord.
- Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
- Do not use the appliance in the event of damage to the power cord, or plug, or in case of short circuits; to repair the product only address an authorized service centre.
- Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc.. Always store it in a dry place.
- Children must not play with appliances. Keep appliances and their cords out of reach of children less than 8 years.
- This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved; children shall not play with the appliance; cleaning and user maintenance shall not be made by children without supervision.
- If the power cord is damaged, or in case of failure and/or malfunction do not tamper with the unit. The reparation must be done by the manufacturer or by a service centre authorized by the manufacturer to prevent any risk.
- Failure to comply with the above may compromise the unit’s safety and invalidate the warranty.
- This appliance is intended to be used in households and similar applications such as staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments.
- The appliance is not intended to be operated through an external timer or a separate remote-control system.
- Before every use, unroll the power cord.
- Use original spare parts and accessories only.
- Do not subject the product to strong impacts, serious damages may result.
GENERAL INFORMATION
- Do not connect the electric plug since the installation is not complete.
- Do not leave the appliance unattended while it is running. Unplug after each use.
- Unplug the unit by pulling the plug and not the power cord.
- Do not immerse the product in water or other liquids and avoid splashing liquids reaching the unit.
- Place on solid and stable surfaces and away from windows or drafts.
- Before carrying out any cleaning, disconnect the unit from the electrical outlet.
- Before each use, unroll the power cord.
- Do not insert anything through the protection grids.
- Do not obstruct in any way the protection grids.
DESCRIPTION G50046
- Front protection grid
- Fan
- Rear protection grid
- Motor protection
- Remote control
- Motor body
- Motor unit fixing knob
- Upper tube
- Adjusting height knob
- Fixing ring
- Lower tube
- Screw for the base
- Drive shaft
- Control panel
- Rear grid stopper
- Fan stopper
- Front grid fixing screw
- Base
- Button OSC
- Button MODE
- Button TIMER
- Button SPEED
- Button ON/OFF
- Light oscillation
- Light Mode
- Lights Timer
- Lights speed
ASSEMBLING
The fan motor can work even if the protective grids have not yet been assembled and fixed. To ensure maximum safety, perform the installation completely before operating.
- Place the lower tube (11) at the centre of the base (18). Turn the base upside down and place the ring (10), then insert the screw (12) in the ring and screw to link the tube and the base.
- Unscrew the height adjustment knob (9), take out the upper tube (8) from the lower tube (11) to the desired length and secure by tightening the knob (9). Insert the motor unit into the upper tube (8) and tighten the locking knob of the motor housing (7) to lock both sides.
- Place the rear grid (3) near the plastic of motor (4) with the metal handle facing upwards. Fit the holes placed in the central part of a grid with the pins in plastic protection (4) and secure the parts with the stopper (15).
- Insert the fan (2) in the drive shaft (13) and thread the stopper (16) to the threaded end of the crankshaft.
- Remove the fixing screw (17). Place the front grid (1) in front of the rear grid (3) with matching holes on the grids.
- Close the locking pins and fasten the two grids tightening the securing screw (17) previously removed. The fan is now correctly assembled.
OPERATING
Once finished assembling the unit, place the fan following the safety
instructions, then plug it into the electrical outlet. The control panel (14)
and the remote control (5) operate the various functions of the fan.
Press the button ON/OFF (23). The fan switches on.
Press the button SPEED (22) to adjust the wind power at different speeds.
- L: low speed
- M: medium speed
- H: high speed
OSCILLATION The oscillation of the head is only possible when the fan is
turned on and it can be activated by pressing the button OSC (19). Push again
to disable the oscillation.
TIMER The fan is equipped with a 7.5-hour timer. Press the button TIMER
(21) if you want the appliance to turn off after a certain time (between 30
minutes and 7.5 hours). Press once to set it off after 30 minutes, twice to
set 1 hour, 3 times for 2 hours, and so on up to 7.5 hours. The sum of the
times associated with the switched-on lights (26) indicates the time set for
the timer.
NATURAL AND SLEEP MODE
Pressing one time the button MODE (20) the fan enters NATURAL mode and the
light (25) switches on. In this mode, the fan reproduces the natural breath of
the wind, according to some preset cycles. Pressing again the button MODE (20)
the fan enters SLEEP mode and the light (25) switches off. This function is
ideal during the night, for better comfort during sleep. The ventilation
cycles are preset.
REMOTE CONTROL
Open the cover on the back of the remote control and insert 1 battery 3V type
CR2032 or CR2025 following the correct polarity (+/-). Close the battery cover
before using the remote control.
- Remove the batteries if you do not use the remote for an extended time.
- Whatever the type of exhausted battery, it must not be thrown in the household waste, in the fire or the water. An exhausted battery must be recycled or disposed of in the appropriately dedicated collection centres.
CLEANING
Disconnect the plug from the electrical outlet before attempting any cleaning
operation.
Do not immerse the unit in water. In any case, prevent splashes of water or
other liquids from reaching the motor body. Do not clean the unit with
metallic sponges or abrasive cleaners, only use neutral detergents and a soft
cloth moistened with water to clean the outer parts. Dry the product
completely before operating the unit.
TECHNICAL FEATURES
- Power supply: AC 230V~50-60Hz. Power 45W
- Fan diameter: 40cm – 3 operation speeds – Oscillation
- Timer – Functions Sleep e Natural – Remote control
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
The product is made of non-biodegradable and potentially polluting substances
if not properly disposed of; other parts can be recycled. We have to
contribute to the ecological health of the environment by following the
correct procedures for disposal. The crossed-out wheelie bin symbol indicates
the product complies with the requirements of the new directives introduced to
protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and
must be properly disposed at the end of its lifetime. If you need further
information, ask for the dedicated waste disposal areas at your place of
residence. Those who do not dispose of the product as specified in this
section shall be liable according to the law.
CONTACT
- To find the nearest service centre, please call the telephone number 0541 694246, fax number 0541 756430 or contact us at assistenzatecnica@trevidea.it asking for the service centre supervisor. www.g3ferrari.it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>