SmallRig 4335 Advanced Cage Kit For Red KOMODO-X User Manual
- June 13, 2024
- SmallRig
Table of Contents
- SmallRig 4335 Advanced Cage Kit For Red KOMODO-X
- Foreword
- In the Box
- Product Detail Display
- Cage Installation Introduction
- Manfrotto Mount Plate Kit Installation
- Top Handle Installation
- Monitor Mount Installation
- Rotating NATO Handle Installation
- Lens Mount Adapter Support Installation
- Compatibility
- Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SmallRig 4335 Advanced Cage Kit For Red KOMODO-X
To ensure user’s safety and prevent product damages caused by any improper use, please carefully read the “Warnings” below and properly keep this User Manual for future reference.
Foreword
Thank you for purchasing Small Rig’s product
Warnings
- Please read this User Manual carefully.
- Please keep this User Manual. Always keep this User Manual. When passing the products on to the third party.
- Heed all warnings and follow all instructions in this User Manual.
Intended Use
- The user has read the instructions of this manual.
- The user is using the product within the operating conditions and limitations described in this User Manual.
- “Improper use” means using products other than as described in these instructions or under operating conditions which differ from those described herein.
In the Box
Product Detail Display
- 1/4″-20 Threaded Hole
- ARRI 3/8″-16 Locating Hole
- NATO Rail
- 3/8″-16 Threaded Hole
- M4 Threaded Hole
- Flat-Head Screwdriver
- Allen Wrench
- Strap Slot
- Cold Shoe Mount
- Allen Wrench
Cage Installation Introduction
Baseplate Installation:
The camera is not included in the package.
Side Plate Installation (same steps for Left and Right Side Plate):
Align the Side Plate with the M4 threaded holes on the side of camera and
Baseplate, use the Allen Wrench (J) to lock the one M4 screw on the top and
the two M4 screws on the bottom.
The camera is not included in the package.
Top Plate Installation:
Align the Top Plate with the l/4′-20 threaded holes on the top of the camera
(with the logo facing forward) and secure the Top Plate by locking the two
l/4′-20 screws with the Flat-Head Screwdriver.
Manfrotto Mount Plate Kit Installation
The camera is not included in the package.
Top Handle Installation
Make sure the knob is facing the lens when mounting.
The camera is not included in the package.
Monitor Mount Installation
The camera is not included in the package.
Rotating NATO Handle Installation
The camera is not included in the package.
Lens Mount Adapter Support Installation
Compatibility
RED KOMODO-X
Specifications
- Product Dimensions: 167.3 x 187 x 231.5mm
- Product Weight: l 008g ± 5g
- Material(s): Aluminum Alloy, Stainless Steel, Carbon Fiber
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>