Kmart 43031634 Gaming 4 In 1 Combo Pack with LED Lights User Guide
- June 6, 2024
- Kmart
Table of Contents
Kmart 43031634 Gaming 4 In 1 Combo Pack with LED Lights
OVERVIEW
In the box:
Wired Gaming Keyboard x1 Wired mouse x1
Wired Speaker x1
Led lights band X1
User Manual x1
Using the LED light strip
Connect the USB connector to a USB power source Clean the surface where you will mount the LED light strip. Remove the adhesive backing as you go, and mount the light strip to the surface.
For best adhesion, the LED light strip is best mounted using only one attempt. For this reason, it’s best to M plan out the setup before attempting to apply.
Take the following into consideration when choosing a location:
The LED light strip must be able to reach a USB power source, such as the USB
port on a computer or a 1.5A USB wall adapter (not included).
Setting
Plug the USB connectors connected to the keyboard and mouse into any of the USB ports (Type A) on the front or back of your computer.
The keyboard and mouse do not require any special installation or software.
Your computer should detect and install them automatically, and your lights
should turn on automatically.
If your computer does not automatically connect to the keyboard or mouse, try
restarting your computer or checking the device settings in your computer’s
Settings or System Preferences panel.
Set up the speakers.
Turn the [Power] dial on the front of the main speaker to the right until it
clicks to power ON. The LED indicator will turn BLUE, and the speaker lights
will turn on When powered on, turn the [Power] dial to adjust volume turn the
[Power] dial to the left until it clicks to power OFF. Audio playback will be
controlled by your connected device.
Setting
Choose a location for the speakers near your computer or near a USB (Type-A)
power source To power, the speakers, plug their attached USB connector into a
USB (Type-A) port on a computer or a compatible 5V USB adaptor(not included)
and plug into a wall socket play audio on the speakers, plug speakers’
attached 3.5mmconnector into a 3.5mm audio output port on your computer or
audio device
Caution
To ensure safe and proper use, please read all information in safety before
using the devices. Use only with batteries, chargers, accessories and supplies
approved by the manufacturer. THIS DEVICE IS NOT A TOY, DO NOT allow children
or pets to use or play with these devices. Do not disassemble, modify or
repair the devices.Do not immerse in water.Do not expose the units to extreme
temperatures (hot or cold), wet open flames, or humid conditions. Do not allow
the USB ports, power connector, or other device entrances are exposed to dust
or water, or enter in contact with conductive materials such as liquids,
metal powders, etc.