G3 FERRARI G30049 Rechargeable Hair and Beard Clipper User Manual
- June 9, 2024
- G3 FERRARI
Table of Contents
G3 FERRARI G30049 Rechargeable Hair and Beard Clipper
PROTECTION CLASSES
|
WARNING
ELECTRIC SHOCK RISK
DO NOT EXPOSE TO RAIN OR MOISTURE
|
---|---|---
ATTENZIONE: NON APRITE L’APPARECCHIO. ALL’INTERNO NON VI SONO COMANDI MANIPOLABILI DALL’UTENTE NE’ PARTI DI RICAMBIO. PER TUTTE LE OPERAZIONI DI SERVIZIO RIVOLGERSI AD UN CENTRO DI ASSISTENZA AUTORIZZATO.
This symbol warns the user that un-insulated dangerous voltage inside the system may cause an electrical shock. Do not open the case.
Class II Appliance symbol. The double insulated electrical appliance is one which has been designed in such a way that it does not require a safety connection to electrical earth/ground.
Caution: this symbol reminds the user to read carefully the important operations and maintenance instructions in this owner’s guide.
SAFETY INSTRUCTIONS
The following are important notes on the installation, use and maintenance;
save this instruction manual for future reference; use the equipment only as
specified in this guide; any other use is considered improper and dangerous;
therefore, the manufacturer cannot be held responsible in the event of damages
caused by improper, incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in doubt, do not attempt to
use it and contact the authorized service center; do not leave packing
materials (i.e. plastic bags, polystyrene foam, nails, staples, etc.) within
the reach of children as they are potential sources of danger; always remember
that they must be separately collected.
Make sure that the rating information given on the technical label are
compatible with those of the electricity grid; the installation must be
performed according to the manufacturer’s instructions considering the maximum
power of the appliance as shown on the label; an incorrect installation may
cause damage to people, animals or things, for which the manufacturer cannot
be considered responsible thereof.
If it is necessary to use adapters, multiple sockets or electrical extensions,
use only those that comply with current safety standards; in any case do not
exceed the power consumption limits indicated on the electrical adapter and /
or extensions, as well as the maximum power shown on multiple adaptor.
Do not leave the unit plugged; better to remove the plug from the mains when
the device is not in use.
Always disconnect unit from power supply if you leave it unattended, or before
mounting and dismounting.
Cleaning operations should be carried out after unplugging the unit.
-
Not for commercial use. Household use only
If the unit is out of order and you do not want to fix it, it must be made inoperable by cutting power cord. -
Do not allow the power cord to get closer to sharp objects or in contact with hot surfaces; do not pull it to disconnect the plug.
-
Do not use the appliance in the event of damage to the power cord, plug, or in case of short circuits; to repair the product only address an authorized service center.
-
Do not handle or touch the appliance with wet hands or bare feet. Do not expose the appliance to harmful weather conditions such as rain, moisture, frost, etc..
Always store it in a dry place. -
This appliance can be used by children of 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they received supervision or instruction concerning use of the appliance in a safe way and understand hazards involved; children shall not play with the appliance; cleaning and user maintenance shall not be made by children without supervision.
-
Children must not play with the appliance.
-
Keep the appliance and its cord out of reach of children less than 8 years.
In case of failure and / or malfunction do not tamper with the unit; to repair the appliance, always contact the service center authorized by the manufacturer and request the use of original spare parts; failure to comply with the above may compromise safety and invalidate warranty. -
This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; by clients in hotels, motels and other residential type environments; farm houses, bed and breakfast type environments.
-
Before every use, unroll the power cord.
-
The appliance is not intended to be operated by means of an external timer or separate remote-control system.
-
Use original spare parts and accessories only.
-
Do not subject the product to strong impacts, serious damages may result.
GENERAL INFORMATION
WARNING: do not use the hair dryer inside the bathtub, under the shower or
inside the shower box. If it falls in water, do not pick it up and
immediately disconnect the power plug. Avoid
splashing of water. If you face one of these problem, before operating it
any further, bring the device to the authorized service center; it must be
checked by qualified personnel.
-
Before using, fully charge the hair-clipper, leaving it connected to the charger for about 2.5 hours.
-
Do not immerse the appliance in water or other liquids. – Use extreme caution when using: do not use in a state of sleepiness and perform delicate movements. Do not use on wigs or irritated skin.
-
Do not use the clipper for more than 10 minutes continuously and allow to completely cool down for at least 5 minutes.
-
Power off the device while changing attachment.
-
Clean and lubricate the clipper regularly to ensure
better performance and longer life. -
Never leave unattended while it is running.
-
Do not wrap the power cord around the unit during use.
Pay attention to the power supply. An incorrect voltage may damage the motor and jeopardize the functionality of the device.
DESCRIPTION G30049
- Blade
- Display
- Cutting regulator
- On/off button
- Charge level
- Charging input
- 4 combs set
- USB cable
- Small brush
- Lubricating oil
- Removable blade set
OPERATING
The hair clipper can be used both weather it is connected with the USB cable
or not.
WARNING: if during battery working the appliance stop working, put switch
(4) in OFF position, connect USB cable (8) to a proper USB charger and to
connector (6). Wait one minute before starting again operation.
HOW TO USE
- Keeping off the unit, mount one of the supplied combs (7). Choose the attachment depending on the length you wish to obtained (3, 6, 9, 12 mm).
- If you want to obtain a shorter cut, between 0.8mm and 2mm, use the clipper without any comb (7). If so, set the cutting height using the regulator (3).
- Turn on the clipper by setting one of the 2 speeds with the ON/OFF button (4) and start cutting.
- Once finished cutting operation, turn off the device using the power button (4), remove any comb and store the clipper and its accessories out of the reach of children
RECHARGING
When you first use the product fully charge it, leaving it connected for at
least 2.5 hours.
To recharge, connect the USB cable (8) to a suitable USB socket (PC, USB
charger, power bank….) and into the connector on the rear of product (6).
During charging, the charge indicator (5) indicates the current level, and the
battery symbol flashes. At the end, the level is 100 and the battery symbol
remains on steady.
The following measures will preserve the battery life.
At first use the product fully charge the product, leaving it connected for at
least 2.5 hours. Before you recharge, completely discharge the battery.
When the unit is not in use for a long period (2 months), it is recommended to
let it charge for about 2.5 hours before using. In any case it is advisable to
fully discharged the battery before recharging. If the appliance, even after a
recharge, works only if it is connected to the cable, it is possible that the
battery is no longer capable of delivering enough power to the unit. In this
case, please contact an authorized service center.
MAINTENANCE AND CLEANING
After each cut, always clean used comb (7) and cutting blade (1) by blowing over them or using the small brush (9). Periodically lubricate the blade by following the steps below. Open the blade set (11), pushing the blade as shown in figure below. Remove remaining hair by blowing or using the small brush (9).
Use lubricating oil (10) for the blade. 2 or 3 drops are enough if this
operation is carried out frequently.
As shown in the figure, two points must be lubricated with oil:
Put 1-2 drops on the blade (white ceramic). Put 1-2 drops on the driveshaft
joint.
Use only the provided oil or similar oil without acids.
Replace the blade set (11) by following the next steps:
-
Insert the tab (B) in the joint (A), as shown in fig. 1.
-
Push the door (2) towards the clipper body until it clicks in position (fig. 2)
Clean the main body by using a soft damp cloth, never immerse the unit in water or other liquids.
TECHNICAL FEATURES
- Input DC 5V – 1000mA
- Cutting height adjustment – Ceramic cutting blade, titanium fixed blade
- Litium battery, 3.7V – 2000mAh, charging 2.5 hours, lasting 3 hours
- Accessories: 4 combs, USB cable, lubricating oil, small brush
WASTE OF ELECTRIC AND ELECTRONIC EQUIPMENT
The product is made of non-biodegradable and potentially polluting substances if not properly disposed of; other parts can be recycled. It’s our duty to contribute to the ecological health of the environment following the correct procedures for disposal. The crossed out wheelie bin symbol indicates the product complies with the requirements of the new directives introduced to protect the environment (2002/96/EC, 2003/108/EC, 2002/95/EC, 2012/19/EC) and must be properly disposed at the end of its lifetime. If you need further information, ask for the dedicated waste disposal areas at your place of residence. Who does not dispose of the product as specified in this section shall be liable according to the law.
To find the nearest service center, please call the telephone number 0541
694246, fax number 0541 756430 or contact us
atassistenzatecnica@trevidea.it asking
for the service centers supervisor.
Appliance is conform to the pertinent European regulation and
is therefore marked with the CE mark.
www.g3ferrari.it
TREVIDEA S.r.l.
Documents / Resources
| G3
FERRARI G30049 Rechargeable Hair and Beard
Clipper
[pdf] User Manual
G30049 Rechargeable Hair and Beard Clipper, G30049, Rechargeable Hair and
Beard Clipper, Beard Clipper, Clipper, Rechargeable Hair, Hair
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>