BATAVIA PACK 18 V Cordless Orbital Sander Instruction Manual
- June 4, 2024
- BATAVIA
Table of Contents
Cordless orbital sander
PACK 18 V
Operating instructions
Model: BT–COS001
Item-No.: 7063457
www.batavia.eu
Overview
- ON/OFF Switch
- Gripping surface
- Battery (not included)
- Dust collection bag
- Dust collection bag flange
- Ventilation slots
- Sanding plate
Dear customer
This sander is intended for dry sanding. It can be used for grinding flat
wood, metal, or filler surfaces, stripping rust or paint and sanding basecoat.
Please familiarize yourself with the proper usage of the device by reading and
following each chapter of this manual, in the order presented. Keep these
operating instructions for further reference.
Please read all safety instructions!
This manual contains important information on operating and handling the
device. Keep these operating instructions for further reference. Please pass
it on along with the unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under art. No: 7062517 (2Ah), 7062518
(4Ah) or 7063735 (5Ah). The charger is available separately under art. No:
7063630 (1,65A), 7063688 (2,4A), 7062519 (3A) and 7063554 (4A). These items
are available online and in participating stores.
Explanation of the symbols
The following symbols are used in the user manual or on the product:
Warning! To reduce the risk of injury, the user must read the instruction
manual.
Denotes risk of personal injury, loss of life, or damage to the tool in case
of non-observance of the instructions in this manual.
Always wear hearing protection. The effects of noise can cause hearing
loss.
Wear a dust mask. When working with wood and other materials, harmful
dust may be generated. Work with asbestos-containing materials is not
permitted!
** Wear safety glasses. When working with electric power tools, sparks,
splinters, chips, and dust particles may be generated and these can cause loss
of sight.
CE stands for “Conformité Européenne”, which means “In accordance with EU
Regulations”. With the CE marking, the manufacturer confirms that this
Electric tool complies with the applicable European directives.
Do not dispose of electric power tools with domestic refuse.
Additional safety warnings for random orbital sanders
** Contact with or inhalation of dust coming free during use (e.g. lead-
painted surfaces, wood, and metal) can endanger your health and the health of
bystanders. Always wear appropriate protective equipment, such as a dust mask.
Always use proper dust extraction during use.
- Do not work materials containing asbestos. Asbestos is considered carcinogenic.
- Do not use the machine for sanding magnesium workpieces.
- Wear safety goggles. Wear hearing protection. If necessary, use other protective means, such as safety gloves, safety shoes, etc.
- Be very careful when sanding painted surfaces.
- Before use, remove all nails and other metal objects from the workpiece.
- Make sure that the workpiece is properly supported or fixed.
- Only use sanding paper that is suitable for use with the machine.
- Only use sanding paper with the correct dimensions. Make sure that the sanding paper is properly mounted.
- Inspect the sanding paper before each use. Do not use sanding paper that is worn because of prolonged use.
- Never put the machine down on a table or a workbench before it has been switched off.
Before the first use
Remove the machine and all accessories from the package. Keep the packaging materials out of the reach of small children. There is a danger of suffocation!
Contents of packing
1× Cordless random orbital sander
1× Dust collection bag
1× Instruction manual
Intended use
The multi sander is intended for sanding wood, plastic, stone, composites,
paint, filler, and similar materials.
Metal and materials containing asbestos must not be worked with the multi
sander. The multi-sander is only intended for dry sanding.
Selecting the sanding paper
- Always use abrasive papers suited to the material you want to sand. The papers must have the correct grain size. The grain is either Corundum or Carbide.
- Depending on grain size there are degrees of coarseness. The coarseness is specified by a number on the back of the papers. The higher the number is, the finer the grain.
- It is important to use the right paper for each job. For rough sanding use grain sizes up to 80, for softwood as larch, pine or spruce use papers from 120 to 150. For dense hardwood such as beech or maple, grain sizes up to 220 can be used.
Attaching the sanding paper
Choose the sanding paper according to the material being worked on.
7.1 Attach the sanding paper to the sanding plate (7) and make sure the holes
on the sanding paper fit with the openings on the base plate. Only this way
the sanding dust can be extracted through the built-in dust removal in the
sanding plate.
7.2 Firmly press the sanding paper down on the sanding plate.
Assembling/Disassembling/ Emptying the dust collection bag
Always use the dust collection bag (4) when sanding.
8.1 Place the dust collection bag onto the provided dust collection flange
(5). Push the connection piece into the flange and turn it clockwise until it
locks into place.
8.2 To remove the dust collection bag, turn the connection piece
counterclockwise and pull it out of the flange. Preferably clean the dust
collection bag and the exhaust connection in the housing after each use. By
doing this the dust collection bag can be easily inserted and removed.
8.3 For emptying the dust collection bag, just tap out or, if available, clean
with compressed air.
ON/OFF switch
9.1 After attaching the sanding paper connect the multi sander to the dust
extraction and to the mains power.
9.2 To turn the machine on, set the ON/OFF switch (1) to me. To turn the
machine off, set the ON/OFF switch to O.
Sanding
- Apply only moderate pressure on the machine. Too much pressure will lead to jamming of the mechanism and will spoil the result. Excessive pressure will overheat the machine.
- Always select the abrasive paper with coarseness suited to the condition of the surface.
- Use finer papers in the consecutive sanding until the desired smoothness is reached. If you desire a very smooth finish you may slightly moisten the surface before the last sanding. This will slightly swell the fibers and allow a smoother finish.
Cleaning and Maintenance
11.1 Cleaning
- Keep safety devices, ventilation openings, and the motor housing as free as possible from dirt and dust. Rub the electric power tool with a clean cloth or blow over it with low-pressure compressed air.
- We recommend that you clean your electric power tool immediately after each use.
- Clean the electric power tool regularly with a damp cloth and somewhat soft soap. Do not use any cleaning or solvent materials; these can attack the device’s plastic components. Make sure that no water can get inside the electric power tool.
11.2 Maintenance
There are no inner parts of the tool which need maintenance.
Technical data
No load speed: …………………………..12000 min-1
Eccentricity: ………………………………………2 mm
Sanding surface:…………………………. Ø 125 mm
Dimensions of sanding paper:……………………………… Ø 125 mm
Weight: …………………………………………………………….. 1.75 kg
Weighted sound pressure level LpA ………………: 67.3 dB(A)
Uncertainty K………………………………………………….3 dB(A)
Weighted sound power level LWA ………………: 78.3 dB(A)
Uncertainty KWA……………………………………. 3 dB(A)
Hand/arm vibration: ………………………………. 9.6 m/s²
Uncertainty K: ……………………………………….1.5 m/s²
12.1 Vibration level
The vibration emission level stated in this instruction manual has been
measured in accordance with a standardized test given in EN 60745; it may be
used to compare one tool with another and as a preliminary assessment of
exposure to vibration when using the tool for the applications mentioned
- using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
- the times when the tool is switched off when it is running but not actually doing the job may significantly reduce the exposure level
Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns.
Disposal
Do not dispose of electric power tools with domestic refuse.
The electric power tool is shipped in packaging to reduce transport damage.
This packaging is a raw material and as such can either be reused or can be
fed back into the raw material cycle. The electric power tool and its
accessories are made from various materials such as metals and plastics. Take
defective components to a special refuse collection point. Ask about these at
your specialist shop or local council.
13.1 Batteries
Think of the environment when disposing of batteries. Contact your local
authorities to find out where your nearest disposal area is. Do not dispose of
batteries with domestic refuse. Do not dispose of by burning, risk of
explosion.
EC-Declaration of conformity
We, the Batavia B.V., With. Wassebaliestraat 6d, NL-7951 SN Staphorst, declare
by our own responsibility that the product Cordless orbital sander, Item-No
7063457, Model Nr. BT–COS001 is according to the basic requirements, which are
defined in the European Directives Electromagnetic Compatibility 2014/30/EU
(EMC), 2006/42/EC (Machinery), RoHS: 2011/65/EU and their amendments. For the
evaluation of conformity, the following harmonized standards were consulted:
EN62841-1:2015
EN62841-2-4:2014
AfPS GS 2019:01
EN55014-1:2017
EN55014-2:2015
Staphorst, 3 June 2021
Meino Seinen, QA Representative Batavia B.V., Weth. Wassebaliestraat 6d, 7951
SN Staphorst, Netherlands The product and the user manual may be subject to
changes. Technical data may be changed without prior notice.
ONE BATTERY
FOR 30+ TOOLS
PACK 18 V
Cordless collection
2 YEAR WARRANTY
This product has got a 2-year warranty
Dear Client, if for any reason this product is not working, please ensure you
contact our Client Service Centre. Ensure you have your original receipt of
purchase. This warranty covers all defects in workmanship or materials in this
Batavia product for a two-year period from the date of purchase. The warranty
does not cover any malfunction, or defect resulting from misuse, neglect,
alteration, or repair.
Deutschland – Kundenservice – Montag bis Freitag von 9 bis 17 Uhr
01805 937 832
* Other European countries – Customer Services /
Autres pays d’Europe – Service clientèle /
Overige landen Europa – Klantenservice
Monday till Friday from 8 am until 4 pm / Lundi jusqu’à Vendredi
de 9 – 17 heure / Maandag t/m vrijdag van 9 tot 17 uur
00800 664 774 00*
Nur €0,14 /Minute aus dem dt. Festnetz, max. €0,42/Minute aus den
Mobilfunknetzen**
www.batavia.eu
info@batavia.eu
BATAVIA B.V.
Weth. Wassebaliestraat 6d
7951SN Staphorst
Netherlands
Documents / Resources
|
BATAVIA PACK 18 V Cordless Orbital
Sander
[pdf] Instruction Manual
BT COS001, PACK 18 V Cordless Orbital Sander, PACK 18 V, Cordless Orbital
Sander, Orbital Sander, Sander
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>