Linkzone Technology WW01002241 Smart Sports Watch Instructions
- June 5, 2024
- Linkzone Technology
Table of Contents
Linkzone Technology WW01002241 Smart Sports Watch
Quick Start
Keys
- Short press the power button
- 0n/Off-Screen
- Return
- Press and hold the power button
- Power On
- Power Off
Screen
- Slide up the interface
- Messages Interface
- Slide down the interface
- Control Interface
- Slide left the interface
- Slide right the interface
- Main Menu
- Shortcut Interface
APP Download
- You can search and download the ” FitCloudPro” App on App Store, Google Play, Myapp, Baidu Assistant, etc.
- Open the watch APP downloading interface, scan to download, or scan the QR code to download. Note: After successfully downloading and installing, please register and log in as guided on the interface, so as to better experience and use the product.
Connection
Pair your watch with the “FitCloudPro” APP on your mobile phone. How to
connect: open APP>> “Device” >> “Add Device”>> “Search ” >>Select the model
and connect, and wait a moment to complete the pairing.
Notes:
- To successfully pair your watch and mobile phone, you need to turn on the Bluetooth of your mobile phone for connection to the device.
- If you are using an Android mobile APP, you must give location permission and enable the mobile phone system’s location function, otherwise, you may not be able to find the device.
Firmware Upgrade
The APP will prompt for a new firmware version, and users can choose to
upgrade the firmware in the APP device interface.
Important Notice for Upgrade:
- Upgrade can only be conducted when the battery level of watch is 60% or more.
- During the upgrade process, the progress bar will be prompted. Please do not operate anything on the bracelet until the mobile phone prompts the upgrade is successful and the bracelet is automatically restarted.
Description of Waterproofing
Waterproof rating: IP68 This product is not permanently waterproof and may be weakened Over time. It supports short-time use such as hand washing and rain, but does not support using in hot showers, scuba diving, diving, surfing and so on. The watch is not waterproof against erosive liquids such as seawater, acidic or alkaline solutions, chemical reagents, etc. Note: It is not recommended to wear the watch while taking a hot shower. Water vapor will be produced when you are taking a hot shower. The small molecule is easy to seep through the gap in the watch case. When the temperature goes down, it will gradually Condense into water droplets, thus damaging the circuit board and further damaging the watch.
Functions
With ultra-long battery life, this product is a lightweight smart sports watch. Integrated with multiple functions such as multi-sport, heart rate, blood pressure, sleep monitoring, daily exercise record, instant message, incoming call reminder, etc., it is suitable for daily health testing and wearing during exercise. After pairing and connecting with your mobile phone, you can experience a series of functions of your smartwatch. Smartwatch supports main interface switching, message notification, step count data, sleep detection, heart rate detection, blood pressure detection, sports mode, messages, weather, ladies’ space, music, etc.
Basic Parameters
- Dimension
- Battery capacity 46309.5mm 200mAh
- Product weight 30.7g
- Screen resolution 200 320 pixels
- Screen size
- Sensor 1.57 inches Tri-axial sensor
Care and Maintenance
It is recommended to wear and care your smartwatch based on the following 3 points:
- Keep the product clean.
- keep the product dry.
- Please wear the product correctly. For stains that are not easy to remove, it is recommended to scrub with alcohol.
Safety Instructions
- Although the smartwatch can be used to measure the real-time heart rate, it cannot be used for any medical purpose.
- Do not place the device and its accessories in areas where the temperature is too high or too low, otherwise, it may lead to devise failure, catching fire or explosion.
- Avoid strong impact or vibration on the product, so as not to damage the device and its accessories or cause any device failure.
- Please do not disassemble or modify the device and accessories without permission, and contact the after-sales service in case of any device breakdown.
- If the device is not used for a long period of time, make sure to charge it once every three months.
FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction