vtech 563800 Scooter Time Bluey Explore Instruction Manual
- June 12, 2024
- vtech
Table of Contents
Instruction Manual SCOOTER TIME BLUEY
563800 Scooter Time Bluey Explore
BLUEY (word mark and character logos) are trade marks of Ludo Studio Pty
Limited and are used under licence. BLUEY logo © Ludo Studio Pty Limited 2018.
Licensed by BBC Studios. BBC is a rade mark of the British Broadcasting
Corporation and is used
under licence. BBC logo © BBC 1996
INTRODUCTION
Thank you for purchasing Scooter Time Bluey Explore with Bluey as she scoots around moving her tail, talking and avoiding obstacles on her scooter.
- Back Sensor
- Power Switch
- Mode Selector
- Light-Up Buttons
- Front Sensor
INCLUDED IN THE PACKAGE
- Scooter Time Bluey
- Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks, removable
tags, cable ties, cords and packaging screws are not part of this toy, and
should be discarded for your child’s safety.
NOTE Please save this Instruction Manual as it contains important information.
IMPORTANT NOTE:
- For optimal performance, please use the scooter on a flat, smooth surface. It is advisable to play with the scooter in a spacious indoor area.
- For your child’s safety, ensure that the scooter wheels are kept away from clothing, skin and hair.
Unlock the Packaging Locks
- Rotate the packaging locks 90 degrees counterclockwise.
- Pull out the packaging locks and discard.
GETTING STARTED
This product is in Try-Me ( ) mode in the packaging. Move the Power Switch to the ON ( ) position to exit Try-Me mode. If the unit powers down during play, please install a new set of batteries.
INSTRUCTIONS
Battery Removal and Installation
- Make sure the unit is turned Off.
- Find the battery cover located on the bottom of the unit, use a screwdriver to loosen the screw and then open the battery cover.
- Remove old batteries by pulling up on one end of each battery.
- Install 4 new AA (LR6/AM-3) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.).
- Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
- Insert batteries with the correct polarity (+ and -).
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
- Only batteries of the same or equivalent type as recommended are to be used.
- Do not short-circuit the supply terminals.
- Remove batteries during long periods of non-use.
- Remove exhausted batteries from the toy.
- Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
- Remove rechargeable batteries (if removable) from the toy before charging.
- Rechargeable batteries are only to be charged under adult supervision.
- Do not charge non-rechargeable batteries.
PRODUCT FEATURES
-
Power Switch
To turn the unit On, slide the switch to the On position. To turn the unit Off, slide the switch to the Off position. -
Mode Selector
Move the Mode Selector to select a mode of play. There are three modes to choose from. -
Light-Up Buttons
Press the Light-Up Buttons to hear nature sounds, Bluey’s catchphrases and theme music from the show. -
Sensors
The Sensors on the front and back of the scooter help Bluey avoid obstacles and allow you to guide her movements. If you are having problems triggering the sensors, make sure the obstacles are placed directly in front of the sensors. Avoid direct sunlight as this may affect the sensor. -
Automatic Shut-Off
To preserve battery life, Scooter Time Bluey will automatically turn off after several minutes without input. The unit can be woken up again by pressing the Light-Up Buttons.
MODES
1. Free Play
Play with Bluey as she scoots around. Use the Sensors to guide her movements
and play fun phrases.
2. Follow Me
Listen carefully and follow Bluey’s moves and sounds.
3. Show Time
Dance along as Bluey scoots around to music from the show.
CARE & MAINTENANCE
- Keep the unit clean by wiping it with a slightly damp cloth.
- Keep the unit out of direct sunlight and away from any direct heat sources.
- Remove the batteries if the unit will not be in use for an extended period of time.
- Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions, please follow these steps:
- Please turn the unit OFF.
- Interrupt the power supply by removing the batteries.
- Let the unit stand for a few minutes, then replace the batteries.
- Turn the unit ON. The unit should now be ready to play with again.
- If the unit still does not work, install a brand new set of batteries.
IMPORTANT NOTE
If the problem persists, please call our Consumer Services Department at
1-800-521-2010 in the
U.S.,1-877-352-8697 in Canada, or visit
our website vtechkids.com and fill out our Contact Us
form located under the Customer Support link. Creating and developing VTech
products is accompanied by a responsibility that we take very seriously. We
make every effort to ensure the accuracy of the information, which forms the
value of our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A service
representative will be happy to help you.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: | VTech® |
---|---|
Model: | 5638 |
Product Name: | Scooter Time Bluey |
Responsible Party | VTech Electronics North America, L.L.C. |
Address | 1156 W. Shure Drive, Suite 200 |
Arlington Heights, IL 60004
Website:| vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPTANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Visit our website for more information about our products, downloads,
resources and more.
vtechkids.com
vtechkids.ca
Read our complete warranty policy online at
vtechkids.com/warranty
vtechkids.ca/warranty TM & © 2023 VTech
Holdings Limited.
All rights reserved.
IM-563800-000
Version: 0
Documents / Resources
|
vtech 563800 Scooter Time Bluey
Explore
[pdf] Instruction Manual
563800 Scooter Time Bluey Explore, 563800, Scooter Time Bluey Explore
---|---
References
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- VTech Canada | Official Electronic Learning Toys & Games for Kids
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
- Best Kids Tech Toys | Electronic Learning Toys | VTech America
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>