camry CR 7722 Fan Heater User Manual
- June 5, 2024
- camry
Table of Contents
Premium
CR 7722
User manual
CR 7722 Fan Heater
Model identifier
CR7722
Item
| Symbol| Value| Unit| Item|
Unit
---|---|---|---|---|---
Heat output
| Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output
| P nom| 2,2| kW|
manual heat charge control, with integrated thermostat
|
N/A
Minimum heat output (Indicative)
| P min| 0,0| kW|
manual heat charge control with room and /or outdoor temperature feedback
|
N/A
Maximum continuous heat output
| P max,c| 2,2| kW|
electronic heat charge control with room and /or outdoor temperature feedback
|
N/A
Auxiliary electricity consumption
| | | |
fan assisted heat output
|
N/A
At nominal heat output
| el max| N/A|
kW
|
Type of heat output/room temperature control (select one)
At minimum heat output
| el min| N/A| kW|
single-stage heat output and no room temperature control
|
(no)
In standby mode
| el sb| 0,0| kW|
two or more manual stages, no room temperature control
|
(no)
|
with mechanic thermostat room temperature control
|
[no)
|
with electronic room temperature control
|
(yes)
|
electronic room temperature control plus day timer
|
(no]
|
electronic room temperature control plus week timer
|
[no)
|
Other control options (multiple selections possible)
|
room temperature control, with presence detection
|
(no)
|
room temperature control, with open window detection
|
(no)
|
with distance control option
|
[no)
|
with adaptive start control
|
[no)
|
with working time limitation
|
(no)
|
with black bulb sensor
|
(no)
Contact
|
Adler Sp. z o.o. ul. Ordona 2A, 01-237 Warszawa, Polska
This product is suitable only for occasional use or for use in well-insulated rooms
WARNING: In order to avoid overheating – do not cover the heater. the device is not to be covered with clothing, blankets, and other textile products which could cause ignition.
SAFETY CONDITIONS
IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.”
- Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
- The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
- The applicable voltage is 220-240V, ~50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
- Please be cautious when using children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
- WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
- After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
- Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc… Never use the product in humid conditions.
- Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
- Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
- Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
- Never use the product close to combustibles.
- Do not let the cord hang over the edge of a counter or touch hot surfaces.
- Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
- In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
- Never use this device close to water, e.g.: Under the shower, in the bathtub, or above a sink filled with water.
- If using the device in the bathroom after use removes the power plug from the socket, because water proximity presents a risk, even if the device is turned off.
- Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put your hands in the water. Has the device been checked by a qualified electrician before using it again?
- Do not touch the device or power adaptor with wet hands.
- Place the fan heater only on a flat, stable surface
- Always turn the fan heater off and set the thermostat dial to a minimum before removing the power plug from the socket.
- Never use the fan heater in high humidity rooms – bathroom, shower room, swimming pools, etc. The humidity can cause short circuits, and effect in damaging the device.
- The operating fan heater needs to be under supervision and insight all the time. If you are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is not used, the power plug has to be removed from the power outlet.
- Do not connect the fan heater to the automatic switching device, for example, temperature controlling device or time switch.
- Flammable materials, for example, furniture, bedclothes, paper, clothes, and curtains should be kept at least one meter from the fan heater.
- Do not cover the device or put any objects on it while it is operating. Do not use the device to dry clothes.
- The power cord should not be placed above the fan heater, and it should not touch or be placed near the hot surfaces of the fan heater. Do not place the fan heater directly under the power outlet.
- The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater should be in a place that children and animals do not have access to.
- The device is not intended to be installed or used in vehicles.
- Some parts inside the device can be hot or cause sparks. Do not use the fan heater in places, where gasoline, paints, or other flammable materials are used or stored.
- Do not use this heater in the immediate vicinity of a bathtub, shower, or swimming pool
- Do not use this heater if it has been dropped
- Do not use it if there are visible signs of damage to the heater.
- Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer
WARNING: Do not use this heater in small rooms where there are people who
are unable to leave them by themselves unless constant supervision is ensured.
WARNING: To reduce the risk of fire, keep textiles, curtains, or other
flammable materials at least 1 m away from the heater air outlet.
Product description: fan heater
1. Remote control storage place
2. Control panel
3. Remote control sensor
4. Air outlet grid
5. Air inlet grid (at the back, not visible here)
6. Power switch (at the back, not visible here)
7. Base
8. Remote control| 9. Power button
10. Temperature decrease button
11. Oscillation button
12. Heat level setting I/II 1200W/2200W
13. Timer button
14. Temperature increase button
15. Indicators: Fan, Heat level I, Heat level II
16. Indicators: Temperature unit, oscillation, timer
---|---
This device should only be placed on a firm level surface and a minimum 50cm distance from walls or any other objects. It is a way to optimize airflow, and avoid placing the device in corners and small spaces.
Using
- Ensure the power switch (6) is off. Insert the plug into a suitable power outlet and turn the power supply on by power switch (6) located at the back of the device. The device is in standby mode.
- Turn on the device by pressing the power button (9) on either the remote or control panel. The device will begin to operate in fan mode.
- Press the Heat level button (12) once to operate low heating mode, or twice to operate high heating mode.
- To turn off the device press the power button (9). Please note: the unit will take approximately 60 seconds to stop blowing out air. Turn off the power switch (6) at the back of the unit.
WARNING: Allow the device to cool down for 30-60 seconds before switching it on again and before turning it off at the power outlet. This will protect the inner parts.
Remote control (8) operation is the same as a manual operation of buttons on
the control panel.
To use the device with the remote control (8) supplied, pull the installing
film. In order to remove the battery, simply squeeze the small tab and pull.
Insert 1 x CR2025 (3V) lithium battery into the small crevice as illustrated
(picture 3).
IMPORTANT: The + symbol on the battery inserted should be facing upwards. Firmly close the battery compartment to begin using the Remote Control (8).
TIMER FUNCTION: The timer function can be used in any mode. The timer allows you to set the length of time from 1-to 8 hours. To use the timer, press the timer button (13). Each press of the button increases the time set by 1 hour. The amount of time set will be displayed on the unit and will count down in 1 hour. If the timer has been set for 8 hours (MAX amount of time) pressing the button once more will reset the Timer Function.
OSCILLATION FUNCTION: Press the oscillation button (11) to turn on the
oscillation function. The device starts to swing left and right sides.
Press the oscillation button (11) again to turn off the oscillation function.
TEMPERATURE SETTING: By pressing buttons (14) and (10) set up desired room temperature.
- The temperature range is available the range from 10 to 49 degrees. Press button (14) to increase the desired temperature and press button (10) to decrease the desired room temperature.
- The device works at full power when the room temperature is 4°C lower than the set temperature.
- The device works on half power when the room temperature is between 0° and 2°C lower than the set temperature.
- The device switches off when the room temperature is higher than the set temperature. The fan works for 30 seconds to make the inside cool to protect components, then the fan stops, and the device enters into standby.
- The device switches on again when the room temperature falls 2°C below the set temperature.
WARNING: During use, do not touch or cover the air inlet and air outlet.
SAFETY PROTECTION
- OVERHEAT PROTECTION: This device is fitted with a safety overheat protection device. If overheating occurs, ensure the power switch (6) is off and turn off the power supply. Unplug the device and let it cool down for 30 minutes. If something is obstructing grids (4 and 5), ensure the object is removed. After 30 minutes have passed, turn the device on again as described above.
- TIP-OVER SWITCH: The device will only work on a firm stable surface. If the device is not 100% stable, in a vertical position, the unit will switch off until placed in the correct position.
CLEANING AND MAINTENANCE
-
Make sure the device is not hot.
-
Before cleaning the device remove the plug from the electrical socket.
-
Keep the air inlet (5) and outlet (6) openings clean. Do not allow dust to collect on the openings. To clean the air filter:
Remove the air inlet grid on the back of the device. Located behind the inlet grid is a dust mesh filter, remove it and rinse under clean running water. Do not use any detergents or solvents to clean the filter. Leave to dry completely for 24-48 hours before re-installing into the device. Do not attempt to use a wet/damp filter as this could damage the device. -
Clean the housing using only dry or moist cloth.
-
Do not immerse the device in the water!
TECHNICAL DATA
Voltage: 220-240V ~50Hz
Power: 2200W
Battery: 1 x CR2025 (3V) lithium battery included
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
Premiumwww.camryhome.eu
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>