camry CR 7039 Bagless Vacuum Cleaner User Manual

CR 7039 Bagless Vacuum Cleaner
User Manual

CR 7039 Bagless Vacuum Cleaner

Accessories:

1. Rectangle brush
2. Straight angle tube
3. Round brush
4. Reduction for hose
5. Reduction for pipe
6. 2x extension tube
7. Cone tip
8. Crevice tip

SAFETY CONDITIONS

IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ IT CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
3. The applicable voltage is 220-240V, ~50Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
4. Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device use it without supervision.
5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
7. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
8. Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions.
9. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
10. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
11. Never put the product on or close to hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
12. Never use the product close to combustibles.
13. Do not let the cord hang over the edge of the counter.
14. Do not immerse the motor unit in water.
15. Do not handle the appliance or power cord with wet hands.
16. For household use only.
17. Do not use the vacuum cleaner to pick up flammable items (such as fuel, and solvents).
18. Do not vacuum objects with sharp edges (e.g. broken glass).
19. Do not aim the vacuum cleaner toward other people or animals.
20. The vacuum cleaner may be used only on dry surfaces.
21. Only use accessories designed for this appliance.
22. Use extra care when vacuuming stairs.
23. Do not block any vents.
24. Do not operate the vacuum cleaner without the filter.
25. Do not pull the vacuum cleaner by the hose.
26. Make sure that the power cord is not wedged by a door and does not get jammed. When moving the vacuum cleaner please note the length of the power cord. Pulling the vacuum cleaner suddenly when the cord is taut may damage it.
27. Vacuuming dust and residues of construction causes immediate loss of warranty. The vacuum cleaner is designed for domestic use only.

Device Description: Fig. 1

1. Dust Container: 1A.Filter 1B. Pre-filter, 1C Dust Cup 1D. Cup Open filter
2. Wheel
3. On/Off button
4. Cord, rewinder button
5. Dust cup release button
6. Dust Cup handle
7. Hose plug
8. Hose
9. Handle
10. Airflow Control
11. Telescopic tube
12. Brush

Assembly

Remove the packaging from the appliance and its attachments. Always remove the plug from the power socket before fitting or removing accessories. Insert the hose connection into the air intake duct. Clockwise rotate until you hear the sound of “Ka”, Please check if it is locked with the button. When finished, anticlockwise rotate the hose to 90 degrees to pull out the hose. Connect the handle to the telescopic tube. Please insert the handle into the telescopic tube. Adjust the length of the telescopic tube Press the telescopic tube button, and adjust the length. Connect the telescopic tube to the floor brush Insert the telescopic tube into the floor brush.

Operation:

Pull out the power cord. The power cord should be pulled out to the length of the yellow mark for the longest length. Do not exceed the red mark on the power cord. Rewind the power cord by pushing the Cord rewinder button. After working, please remove the plug from the socket, pinch the plug with one hand and press the coil button with the other hand, otherwise the plug may bounce. ON/OFF Insert the plug into the socket. Press the ON/OFF button before working. Airflow control When cleaning things like curtains, which do not need too much suction, the user can slip the slider on the hose handle to reduce the suction.

Maintenance

1. Cleaning the dust cup Fig.2
A.Press the dust cup button and remove the dust cup.
B.Push the cup-open button to empty the trash.
C. If want to clean the filter, one hand holds the pre-filter while the other hand contra rotates the filter and lifts it out.
D. Put the filter back into the pre-filter, and clockwise rotate it for fixation.
Note: It is not suggested to re-use the filter once it was very dirty. Better to change to a new one for better cleaning performance. Remove and assemble the air outlet filter Fig. 3
Push the outlet board to the lock button and pull it out, then remove the filter for cleaning or changing. After finished cleaning or assembling a new filter onto the outlet board put the board back and lock it to the right position.
Clean sponge
A. Take out the sponge, which should be rinsed and tapped out until the water runs clean.
B. Then tapped out again to ensure all excess water is removed.
Note: Sponge should be dry by airing. Please do not dry by machine to prevent the out of shape.
Technical Data:
Power Supply: 220-240V 50/60Hz Power: 700W Comparable to: 3100W
To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. The used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.

www.camryhome.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>