Camry CR2021 Rotating Hair Dryer User Manual
- May 15, 2024
- camry
Table of Contents
Camry CR2021 Rotating Hair Dryer
Specifications
- Power: 1200W
- Voltage: 220-240V ~50/60Hz
Product Information
The hair styler is a versatile tool for hair styling, featuring rotating brushes for easy and effective styling. It comes with various settings for temperature control and brush rotation.
Product Usage Instructions
Cleaning and Maintenance
- Unplug the hair styler from the power socket before starting cleaning.
- Wipe the outer housing (1) with a damp cloth. Avoid abrasive or sharp materials.
- Clean the brush from hair after each use.
- Check if the air inlet filter (7) is not clogged with hair or dirt. Clean it if necessary.
- Ensure no hair is left on the hair styler after use.
FAQ
- Q: Can I use the hair styler on wet hair?
- A: It is recommended to use the hair styler on dry hair to avoid any potential risks.
- Q: How often should I clean the air inlet filter?
- A: It is advisable to check and clean the air inlet filter regularly, especially if you notice any blockages.
Parts
GENERAL SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE. PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
The warranty conditions are different if the device is used for commercial purposes.
-
Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
-
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
-
The applicable voltage is 220-240V ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
-
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
-
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are
over 8 years of age and these activities are carried out under supervision. -
Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc. Never use the product in humid conditions (bathrooms, mobile homes).
-
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
-
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly.
-
Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
-
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
-
Never use the product close to combustibles.
-
Do not let the cord hang over the edge of the counter.
-
Once you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
-
WARNING: When the hair dryer is used in the bathroom, remove the plug from the socket after use, as the proximity of water poses a hazard even when the hair dryer is switched off
-
WARNING: Do not use this equipment near bathtubs, showers, swimming pools or similar bodies of water.
-
Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again?
-
Do not touch the device with wet hands.
-
The device has to be turned off after every use.
-
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
-
In order to provide additional protection, it is recommended to install residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact professional electrician in this matter.
-
Do not use the device outdoors.
-
Do not direct the hot stream to the cord.
-
After using the device, each time turn it off with the switch and remove the plug from the mains socket.
-
Do not wrap the cord around the appliance.
-
Attention!!! The device heats up during use. Do not touch the hot surfaces of the device.
-
Be sure that accessories are dry, before you attach it to hair dryer.
-
Never use sharp tool to clean the device.
-
Never direct hot air toward the eyes and other sensitive parts.
PRODUCT DESCRIPTION
- housing
- removable brushes
- switch On/Off/temperature adjustment
- brush lock slider
- swivel cord
- rotating brush buttons (left / right)
- air filter
hook for hanging
USING THE DEVICE
Hair styling with a rotating brush. To rotate the brush press one of the rotating brush buttons (6). You can rotate it left or right.
-
Attach brush (2) by putting it on the pin.
-
Move the brush lock slider (4) to lock.
-
Make sure that the brush is properly attached and does not slip off the pin.
-
Connect the plug to the power socket
-
Turn on hair styler with the switch (3). Adjust required air temperature (*- cool shot, 1 – lower temperature and speed, 2 – higher temperature and speed)
NOTE: The cool shot blow is only for fixing the hairstyle, therefore the brush does not rotate when using this function. -
Separate streak of hair, brush out, and start to wind from the end on the brush using rotating brush buttons (6). Wait few seconds till hot air stream consolidate shape of winded hair.
-
Unwind hair.
-
Turn off the hair styler and unplug it from the power socket.
-
Form required hairstyle with brush or comb.
CLEANING AND MAINTENANCE
- Unplug the hair styler from the power socket before start cleaning.
- Wipe the outer housing (1) with a damp cloth. Do not use abrasive or sharp materials.
- Clean brush from hair after each use.
- Check if the air inlet filter (7) is not stuck with hair or other dirt. If necessary clean it out.
- Do not leave any hair on the hair styler.
TECHNICAL DATA
- Power: 1200W
- Voltage: 220-240V ~50/60Hz
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container Worn device should be returned to the appropriate point storage because it is dangerous in the device ingredients may pose a threat to the environment. The electrical device should be handed over to limit its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
OTHER PRODUCTS
