camry CR 6514 Premium Induction Cooker User Manual
- June 4, 2024
- camry
Table of Contents
camry CR 6514 Premium Induction Cooker
INSTRUCTIONS FOR SAFE USE
- Before using the appliance check if the voltage indicated in the data plate corresponds to the local power supply parameters. Remember that AC stands for “alternating current” while DC stands for “direct current”.
- Unwind and straighten the power cord
- Make sure that the power cord and the plug have no visible signs of damage
- Make sure that, before and during use, the power cord is not routed above naked flames or other source of heat or hung over sharp edges which might damage the cable insulation.
- Periodically check the condition of the power cord. If damaged the power cord should be replaced by an authorized repair facility to avoid danger.
- Before the first use remove all the packaging elements. Attention! Where the casing is composed of metal parts, such parts may be covered with a protection film which is hardly visible. The film should be removed too.
- This appliance is not intended for use by children or persons with reduced physical, sensory or mental capabilities unless they have been given supervision of authorized or experienced persons always in accordance with this manual
- The appliance is intended for operation with external time switches or separate remote control systems.
- The appliance can only be connected to an earthed 220-240V ~50/60 Hz socket CAUTION: This appliance is not intended for use by children under the age of 8 or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge of the equipment, unless they have been given supervision or instruction concerning the use of the equipment and the elated hazards by a person responsible for their safety and they are aware of the danger related to the operation of the equipment. Children should not play with the equipment. The equipment must not be cleaned or maintained by the children unless they are not under the age of 8 and the activities are supervised
- Do not leave the appliance unattended when in use.
- Do not use the appliance near inflammable materials.
- Power cord must not hang over a table top or touch hot surfaces.
- Do not immerse the appliance or the power cord in water or any other liquid.
- Do not expose the appliance to weather conditions (rain, sunlight etc.) or use it in elevated humidity conditions (bathrooms, damp holiday cottages)
- When the appliance is not in use it should always be unplugged from the power socket.
- Do not remove the power plug from the socket by pulling the cord – grip the plug instead.
- The manufacturer shall not be held liable for damage resulting from improper use of the appliance.
- Remember that some parts of the appliance and the housing may become hot during operation. Therefore, pay special attention and do not touch them to avoid burns.
- Always operate the appliance on a dry and stable surface
- NEVER cover the appliance when in use or until it has cooled down.
- Remember that it takes time for the heating elements to cool down completely
- The appliance is a 1st class fire protection device and, therefore, it must be connected to a power socket with an earthing prong.
- Provide sufficient space around and above the appliance when in use. During the operation the appliance must not come in contact with any inflammable objects such as decorations, paper towels, curtains, clothes etc.
- TAKE CARE when using the appliance on surface sensitive to high temperature. In such a case use insulating pads.
- Do not use this appliance with external time switches or any other remote control systems.
- Do not heat up an empty pot.
- The appliance may affect objects having a magnetic field like radios, TVs, bank cards or audio cassettes.
- Do not use the appliance on a metal surface.
- Do not disconnect the appliance from the mains socket immediately after you have finished cooking. Wait at least several seconds until it cools down.
- Do not place objects made of metal such as knives, forks, spoons or lids on the induction heating zone, as there is a risk of them becoming hot.
- Persons implanted with a pacemaker or insulin pump may operate devices with induction heating fields only if these implants comply with the provisions of 2014/30/EU.
DETAILED SAFETY CONDITIONS
- Use this appliance indoor only.
- Do not use aggressive detergents e.g. cleaning emulsions, cream cleaners, cleaning pastes etc. as they may remove the graphic symbols such as designations, warning signs etc.
- Do not put empty containers or dishes on the appliance.
- Do not use the electric cooker as a space heater or to warm inflammable, explosive, noxious, volatile materials or liquids.
- Do not use accessories which are not recommended by the manufacturer as they may be dangerous to the use or pose the risk of damage to the appliance itself.
- Never move the appliance by pulling the power cord. Make sure that the power cord is not obstructed in any manner. Do not wrap the power cord around the appliance or kink it.
- Never move the cooker when boiling water or with a hot cookware on it.
- Make sure the appliance has cooled down before storing it.
- Do not place the appliance so that the heating plate could contact other appliances (e.g. mixers). Do not put the cooker below the power socket
- Place the cooker at least 30 cm away from the wall, furniture, other equipment, containers. Make sure that sheer curtains, curtains, clothes or other inflammable materials cannot come closer than 30 cm away from the cooker as this may cause fire.
- Never place containers made of PVC, paper, cardboard etc. on the heating plate.
- Do not touch the housing or the heating plates of the cooker when in use. During the operation use the knobs only. After turning the cooker off wait until it has cooled down.
- Temperature of accessible surfaces of the appliance can be high when in operation. Do not touch the hot surfaces of the appliance.
- Children of the age 3 to 8 may turn the appliance on or off only when the appliance is in its normal operating position and they are supervised or have received instructions about safe use and understood the related hazards. Children of the age 3 to 8 must not connect, operate, clean or maintain the appliance
- The appliance should be stored together with the power cord out of the reach of children under 8 years of age
- Do not use:
- Pots and frying pans with a diameter below 12 cm,
- Cooking utensils made of copper, aluminium or glass
- Cooking utensils with feet or with a rounded (non-flat) bottom
- Magnetic bottom pots and pans intended for cooking/frying with the use of induction cooker are recommended.
- Do not place pots and frying pans heavier than 6kg on the cooker.
WARNINGS
- Never use the appliance if damaged or malfunctioning.
- Do not operate the appliance after it has been dropped or shows clear signs of malfunctioning.
- Do not use extension cords or other electrical sockets which do not meet the standards in force or electrical regulations
- Any repairs, disassembly or replacement of any parts should always be carried out by professional service facility.
- If the appliance or parts such as electrical contacts, plug or power cord have got wet dry the appliance and its components before used.
- Never operate the appliance with wet hands.
- When you suspect that the appliance has been damaged NEVER try to repair it on yourself.
- Do not wash the appliance under running water or so that water could penetrate it.
DESCRIPTION
A. Induction cooker
- Power button
- Options button for power/temperature level
- Time / Temperature decrease button
- Time / Temperature increase button
- Timer button
- Child lock
- Display window
- Child lock icon
- Timer icon
- Power icon
- Temperature icon
- Power supply icons
The operation is the same for both left and right heating plate. The devices contains two independent heating plates, each heating plates can be individually switched and add or reduce power, or add or reduce temperature. A single heating plate the maximum heating power can be 2000W. When two heating plates at same time heating, the internal controller will coordinate the heating plates, the sum of the power does not exceed 3500W to ensure the safety of electricity.
Example: Principle of operation.
- When the left heating plate is set to 2000W, and then try to set up 2000W the right plate also, the left heating plate power will decreased to 1400W, and the right heating plate will operate with 2000W power.
- Both left and right heating plates can be set to maximum temperature of 240℃
- The operation is the same for both left and right heating plate.
BEFORE FIRST USE
- NOTE: If the cookware is removed from the induction cooker at any time during the cooking cycle, the unit will beep sound for 60 seconds, error code E00 will appear in the display window (7) and the unit will shut off automatically.
- NOTE: When the unit is turned off, the fan will continue running and the display window (7) will also display ”H” until the temperature of the induction cooker is below 50℃.
- NOTE: Cookware bottom diameter should be no less than 12 cm or more than 22 cm in order to work correctly. If the cookware is larger than the cookware placement guides indicated on the induction cooker, the area outside these guides will not work causing an inconsistent heating pattern.
- NOTE: If the induction cooker has been turned on without a compatible pot in place the unit will beep for approximately 60 seconds, error code E00 will be appear in the display window (7) and the unit will shut off automatically.
- NOTE: When the unit is off, the fan may continue running until the temperature of the induction cooker is below 50℃.
- NOTE: NEVER heat empty cookware. This will cause the unit to overheat, damage the cookware and/or cause the unit to shut off.
Error Codes:
- E00:No pot. There is need to put the pot on the heating plate to operate the unit.
- E01:Low voltage.
- E02:Over voltage.
If error codes E01,E02,E03,E04,E05,E06,E07,E09,E0b,E0d,E12 are reported, please contact the service center for inspection and repair.
HOW TO USE
Remove the packing elements and align the power cord.
-
Place the induction cooker on a dry and flat surface.
-
Add food to the cookware.
-
Put the cookware within the place indicated on the induction cooker surface.
NOTE: Ensure that the bottom of the cookware is clean as dirt may cause the bottom to be sticked to the induction cooker’s surface. NEVER heat empty cookware. This will cause the unit to overheat, damage the cookware, and/or cause the unit to shut off. -
Plug in 220-240V~ 50/60 Hz outlet. The unit will beep and all the indicator will lights for one second. If no operation within 15 seconds, it will back to power off status.
The operation is the same for both left and right heating plates. The whole device power button (1) is on the left heating plate.
-
Press the power button (1) on the left heating plates.
The icons (12) on the left and right heating plates display will light up together. -
Press the option button (2), the display window (7) shows the default power “1400” and the heating will start. Press the “+”/ “-“ buttons (3/4) to select desired power level: “+” button (4) to increase and “-” button (3) to decrease the power. There are total 9 power levels for your choice: 200W,500W,800W,1000W,1200W,1400W,1600W, 1800W, 2000W.
-
Press the option button (2) again to switch to the temperature mode. The indicator ℃ (11) will light up. The display window (7) shows the default temperature 200℃. Press the “+”/ “-“ buttons (3/4) to select desired temperature level: “+” button (4) to increase and “-” button (3) to decrease the temperature.
There are total 10 temperature levels for your choice: 60℃, 80℃,100℃ 120℃,140℃ 160℃, 180℃, 200℃, 220℃, 240℃, of the pot’s bottom. -
If you wish to use the timer, press the option button (2) the display window (7) shows the default power “1400” and start heating. Press the “+”/ “-“ buttons (3/4) to select desired power level: “+” button (4) to increase and “-” button (4) to decrease the power after that press the timer button (5).The display window (7) shows the default time “0:00”. Press the “+”/ “-“ buttons to select cooking time in range 0-3 hours, “+” (4) button to increase and “-”(3) button to decrease the time. If you press and hold “+” or ”-“ button, the time will change faster. Once desired time is selected, press timer button (5) again or wait 5 seconds then timer is now activated. Display window (7) will show the timer or power (if in temperature mode will show the timer or temperature) alternately.
When the programmed time has elapsed, the induction cooker will beep once and shut off automatically.
NOTE: If at any time during the cooking cycle you would like to cancel the timer, simply press the timer button (5). -
Child lock button.
Press and hold ”+” (3) and ”-” (4) together for 3 seconds will enter into child lock, the icon on the display will light up (8). The child lock can be used when the heating plate heating or is on standby. Only child lock button and power button (1) are available when the child lock is activated. Press and hold the ”+” (3) and ”-”(4) together for 3 seconds to cancel the child lock function. -
Press the power button (1) on the left side device, to turn the unit off when finished cooking.
CLEANING AND MAINTENANCE
Washing the appliance after each use is recommended. Disconnect the appliance
from the mains socket and wait until it cools down. Do not use petrol,
solvents, brushes or pastes to clean the induction heating plate.
Wipe the appliance with a damp cloth with some dishwashing liquid. Use a
vacuum cleaner to remove dirt from the air supply and fan grilles. Clean the
glass surface and the control panel with a soft damp cloth and gentle cleaners
for glass surfaces.
Make sure that water does not drip on the cooker, as this can cause damage.
Never immerse the appliance or the cable in water. All servicing, other than
cleaning, should be performed by an authorized service representative.
Technical data:
- Power: 3500W
- Power supply: 220-240V ~50/60Hz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>