Camry CR7743 Ceramic Heater User Manual

: May 15, 2024
: camry

Table of Contents

Camry CR7743 Ceramic Heater
user manual
BEFORE FIRST USE
CLEANING AND MAINTENANCE
TECHNICAL DATA
AFTER-SALE SERVICE NOTICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Camry CR7743 Ceramic Heater

Camry-CR7743-Ceramic-Heater-product

Product Specifications

Item	Symbol	Value/Unit
Heat output	Nominal heat output	P nom: 2.4 kW
Minimum heat output (indicative)	P min: 1.0 kW
Maximum continuous heat output	Pmax,c: 2.4 kW
Auxiliary electricity consumption	At nominal heat output	el max: 0.000 kW
At minimum heat output	el min: 0.000 kW
In standby mode	el SB: 0.000 kW

Heat Charge Control Options

Manual heat charge control with integrated thermostat – [no]
Manual heat charge control with room and/or outdoor temperature feedback – [no]
Electronic heat charge control with room and/or outdoor temperature feedback – [no]

Type of Heat Output/Room Temperature Control

Select one option:

Single stage heat output and no room temperature control -[no]
Two or more manual stages, no room temperature control – [no]
With mechanic thermostat room temperature control – [no]
With electronic room temperature control – [yes]
Electronic room temperature control plus day timer – [no]
Electronic room temperature control plus week timer – [no]

Other Control Options

Room temperature control with presence detection – [no]
Room temperature control with open window detection – [no]
With distance control option – [no]
With adaptive start control – [no]
With working time limitation – [yes]
With black bulb sensor – [yes]

Contact Information
Adler Sp. z o.o. ul. Ordona 2A, 01-237 Warszawa, Polska

Note
Please do not cover the device with textiles or clothing as it may lead to overheating and fire hazards.

Frequently Asked Questions (FAQ)

Q: Can I use the product in extremely high temperatures?
A: The product is designed for optimal performance within specified heat output ranges. Operating in extreme conditions may affect performance.
Q: How often should I clean the product for maintenance?
A: Regular cleaning is recommended to maintain efficiency. Refer to the user manual for specific cleaning instructions.

user manual

Model identifier:| CR7743| | |
---|---|---|---|---
Item| Symbol| Value| Unit| | Item| Unit
Heat output| | | Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output| P nom| 2,4| kW| | manual heat charge control, with integrated thermostat| [no]
Minimum heat output (indicative)| P min| 1,0| kW| | manual heat charge control with room and /or outdoor temperature feedback| [no]
Maximum continuous heat output| Pmax,c| 2,4| kW| | electronic heat charge control with room and /or outdoor temperature feedback| [no]
Auxiliary electricity| | | | | fan assisted heat output| [no]
At nominal heat output| el max| 0,000| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| el min| 0,000| kW| | single stage heat output and no room temperature control| [no]
In standby mode| el SB| 0,000| kW| | two or more manual stages, no room temperature control| [no]
| | | with mechanic thermostat room temperature control| [yes]
| | | with electronic room temperature control /| [no]
| | | electronic room temperature control plus day timer| [no]
| | | electronic room temperature control plus week timer| [no]
| | | Other control options (multiple selections possible) / I
| | | room temperature control, with presence detection /| [no]
| | | room temperature control, with open window detection /| [no]
| | | with distance control option| [no]
| | | with adaptive start control| [no]
| | | with working time limitations/| [yes]
| | | with a black bulb sensor| [yes]
Contact| Adler Sp. z o.o. ul. Ordona 2A, 01-237 Warszawa, Polska

DO NOT COVER« INSCRIPTION IMPORTANCE The inscription on the device means that the device is not to be covered with clothing, blankets and other textile products which could cause ignition.
This product is suitable only for occasional use or for use in well-insulated rooms.

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
The warranty conditions are different if the device is used for commercial purposes.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let cord hang over edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact a professional electrician in this matter.
Never use this device close to water, e.g.: Under shower, in the bathtub,
or above sink filled with water.
If using the device in the bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.
Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by a qualified electrician before using it again.
Do not touch the device or power adaptor with wet hands.
Place the fan heater only on flat, stable surface.
Always turn the fan heater off and set the thermostat dial to a minimum before removing the power plug from the socket.
Never use the fan heater in high humidity rooms – bathroom, shower room, swimming pools etc. The humidity can cause short circuit, and effect in damaging the device.
The operating fan heater needs to be under supervision and in sight all the time. If you are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is not used, the power plug has to be removed from the power outlet.
Do not connect the fan heater to the automatic switching device, for example, temperature controlling device or time switch.
Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should be kept at least one meter from the fan heater.
Do not cover the device or put any objects on it while it is operating. Do not use the device to dry clothes.
The power cord should not be placed above the fan heater, and it should not touch or be placed near hot surfaces of the fan heater. Do not place the fan heater directly under the power outlet.
The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater should be in a place that children and animals do not have access to.
The device is not intended to be installed or used in vehicles.
Some parts inside the device can be hot or cause sparking. Do not use the fan heater in places, where gasoline, paints or other flammable materials are used or stored.
Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool
Do not use this heater if it has been dropped
Do not use if there are visible signs of damage to the heater
Use the heater on a level and stable surface or attach it to the wall, if provided for by the manufacturer

WARNING : Do not use this heater in small rooms where there are people who are unable to leave them by themselves unless constant supervision is ensured.
WARNING : To reduce the risk of fire, keep textiles, curtains or other flammable materials at least 1 m away from the heater air outlet.

BEFORE FIRST USE

Place the device on even, flat surface. Position it a minimum 1 meter distance from the air inlet (3) and air outlet (4) to allow a good airflow circulation. The device should not be placed underneath a power outlet. Plug in the device to suitable socket.
When the heater is turned on for the first time, it may release a slight, harmless odor. This odor is a normal occurrence caused by the initial heating of the internal heating elements and should not occur again.

Camry-CR7743-Ceramic-Heater-2

DESCRIPTION OF THE DEVICE: CERAMIC FAN HEATER

Thermostat knob
Heating power knob
Air inlet
Air outlet
Handle

Camry-CR7743-Ceramic-Heater-1 USING THE DEVICE
To switch on the device turn the heating power knob (2) from position zero (0) to position one (I): I – means the fan is switched on, and unheated airflow is available.

Turn the thermostat knob (1) in a clockwise direction until it reaches the maximum setting.
Set up the required heating power level:
means first heating power level 1000W,
means first heating power level 2400W.
When the room has reached the required temperature turn the thermostat knob (1) in a counterclockwise direction up to the point where the device switches off and not beyond. The temperature fixed in this way will be automatically controlled and kept at constant.
The temperature of heating can be adjusted on each heating power level by using the thermostat knob (1) by rotation between MIN (-) and MAX (+) according to your requirements.
To switch off the device turn the heating power knob (2) to position zero.

The device is protected against overheating by means of a thermal switch, which can power it off for a while. If this happens, unplug the device and wait couple of minutes. After a while it cool down, you can continue to use the device.

CLEANING AND MAINTENANCE

Remove the plug from the electrical socket and make sure the device is cooled down before cleaning.
Use a vacuum cleaner to remove the dust on air inlet (3) and air outlet (4) and do not allow dust to collect there.
Clean the housing using only dry or moist cloth. Never use solvents like gasoline, isoamyl acetate, toluene etc. to clean the device to protect the enclosure. After cleaning dry it by dry cloth.
Do not immerse the device in water!
Storage the device in dry and ventilated place protected against dust. Do not place any heavy items on the top of the device during storage.

TECHNICAL DATA

Voltage: 220-240V ~50-60Hz
Power: 2400W
Max power: 2400W

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.