Camry CR 6008 Mini oven Installation Guide

: June 4, 2024
: camry

Table of Contents

Camry CR 6008 Mini oven
DESCRIPTION:
GRILLING/BAKING
TECHNICAL DATA:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CR 6008 Mini oven
Installation Guide

Camry CR 6008 Mini oven

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE
READ CAREFULLY AND KEEP IT FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, ~50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using around children. Do not let the children play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they re over 8 years of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug, or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over the edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, and unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating of not more than 30 mA. Contact a professional electrician in this matter.
Do not allow moisture to the motor unit.
If it is necessary to use an extension cord, use only a grounding pin and adapted to a current of min 10 A. The other extension cords may overheat. The cable must be positioned so as to avoid accidental strokes or stumbles on him.
The oven should be put on a flat, temperature-resistant surface away from flammable materials (curtains, drapes, wallpaper, etc.). In order to ensure proper air circulation, there should be at least 10 cm of free space on each side of the unit and at least 30 cm above the oven. Do not cover the ventilation holes of the oven, as this may cause overheating and damage.
Do not use the oven with the door open. Do not cover the machine during operation, nor put any items.
Do not touch the hot surfaces of the oven (door, top or bottom wall, and side walls). Use protective gloves to remove or touch any hot parts.
During operation, the door glass becomes extremely hot. It must not be heavily hit, or poured in cold water because of the risk of its cracking.
The power cord can be installed over an oven, and should not touch or be near hot surfaces. Do not place the oven under the electrical outlet.
Due to the high temperature keep special carefulness when removing the tray or grate (or other accessories approved for use in ovens) with baked dishes. Please be careful, when removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the oven or heat-resistant oven gloves.
Oversized food must not be inserted, as this may cause fire and damage the appliance.
Do not place any cardboard, paper, plastics, and other flammable or easily melt objects in the oven.
Do not store any other accessories in the appliance.
After cooking and before cleaning the machine, unplug the power cord from the outlet and leave it to cool. Wait a long period of time because the heated oven cools very slowly.
Clean the device after each use.
28. Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the casing. They can wipe off the graphic signs on the surface such as scales, marks, warning signs, etc.
Do not wash metal parts in the dishwasher, as the corrosive detergents used in these devices cause the darkening of the above parts. It is recommended to wash them by hand, using traditional dishwashing liquids.
To avoid overheating the oven the crumb tray or any other part of the oven should not be covered with a metal foil.
Do not use metal scouring pads to clean. Broken metal pieces may come into contact with electrical parts, creating a risk of electric shock.

DESCRIPTION:

1. Temperature adjustment knob| 2. Heating mode selection knob/power button / OFF
---|---
3. Housing| 4. Timer
5. Indicator lamp| 6. Handle for opening glass door
7. Baking tray| 8. Grill
9. Rotary spit axis| 10. Tray removal handle
11. Spit removal handle| 12. Spit jaws (2 pairs)

BEFORE SWITCHING ON

Make sure the oven is placed on the high-temperature resistant base
Make sure there Is enough ventilation space around the oven (minimum 10 cm on each side and 30 cm above the oven)
Make sure the oven is dry

USING THE DEVICE

Set temperature adjustment knob (1) to the desired value.
Set the heating mode selection knob (2) in position:
– Both upper and lower + fan (2a)
– Both upper and lower (2c)
– upper + rotary spit (2d)
– Upper + fan (2b)
– Both upper and lower, rotary spit and fan (2e)
Set timer (4) to the required baking time. A bell is rung upon reaching the required baking time.
In order to switch the device off before the time has run out, rotate the heating mode selection knob (2) knob to “OFF” (2f).
Always unplug the power cable from the power outlet after use

USING ROTARY SPIT

Put one pair of jaws on the axis’s sharp side, then slide onto the axis.
Impale such prepared spit (9) into the center part of the product to be baked, and stick the spit jaws (12) in the product.
Put in the second pair of jaws, and stick them from another side, “closing” the product on the spit axis.
Check that the fixed product is located centrally along the spit axis.
Place the square end of the spit in the spit drive coupling on the right-hand side of the oven heating chamber, and place the sharp end in the bearing on the left-hand side.
Set temperature adjustment knob (1) to the desired value (for example 200°C)
Turn the oven on using the heating mode selection knob (2e), and the lamp (5) will illuminate. Set the desired baking time.(4)
After the baking time runs out, switch the oven off by rotating the heating mode selection knob (2) to “OFF”(2f). Always unplug the power cable from the power outlet after use.
Before removing the product baked on a spit, wait a moment to allow the device to cool. Then grab the spit axis using a spit removal handle (11).
First, raise the left side, and slide to the left, so that the right axle end leaves the drive coupling. Then, carefully remove the baked meal from the oven.

GRILLING/BAKING

Open the oven door.
Place grill (8) in the oven, place products to be grilled on the grill or dish with food, and close the oven door.
Set the heating mode selection knob (2b)
Set temperature adjustment knob (1)
Set the desired baking time with the knob (4).
After baking, switch the oven off by rotating the heating mode selection knob (2) to “OFF remove the power plug from the “(2f), and power socket.
Wait a moment, and remove the grill with baked products carefully using special heat-resistant gloves.

CLEANING AND MAINTENANCE

Before cleaning of the oven switch it off and leave it to cool.
Disconnect the device from the power source by removing the power plug from the power socket.
Do not immerse the oven in water.
Clean the casing with a moist cloth, and then wipe dry.
Clean the tray and grill in water with washing-up liquid. Wipe dry using a cloth.
Clean the glass door with a moist cloth or sponge soaked with water and washing-up liquid. Then wipe dry.
Do not use sharp metal tools to clean the residues of baked products.

TECHNICAL DATA:

Power supply: 220-240V ~50/60Hz
Timer: 60 min.
Power Nom.: 2200W
Power MAX.:3000W
Capacity: 63 L

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins.
The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. The electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries they should be delivered to dedicated points separately.

www.camryhome.eu