REELY 2250245 Stunt-Drone Ghost Instruction Manual

REELY 2250245 Stunt-Drone Ghost Instruction Manual

1. Introduction

Dear customer, Thank you for purchasing this product.
Important Keep these operating instructions for reference and provide them together with the product to any third party.

This product complies with the statutory national and European requirements. To maintain this status and to ensure safe operation, you as the user must observe these operating instructions! If there are any technical questions, please contact: www.conrad.com/contact

2. Explanation of symbols

The symbol with the exclamation mark in the triangle is used to indicate important information in these operating instructions. Always read this information carefully. The arrow symbol indicates special information and advice on operation.

3. Intended use

The product is a ready to fly remote controlled mini quadcopter. It is intended for indoor use only. It is suitable for persons aged 16 years or older. Contact with moisture must be avoided under all circumstances. For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes other than those described above, the product may be damaged. In addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this product available to third parties only together with its operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Quadcopter
• Transmitter (remote control)
• LiPo Battery
• USB charging cable
• 4x spare propellers
• Operating instructions

5. Up-to-date operating instructions

Download the latest operating instructions at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.http://www.conrad.com/downloads

6. Features and functions

• Built-in 6-axis gyroscope
• 360-degree stunt roll
• Headless mode
• 3-speed modes

7. Spare parts

Visit www.conrad.com and search the Item No. for information about any optional accessories, spares, or replacement parts.
Only use genuine spare parts.

8. Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling in this manual, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

Before use

• Choose a suitable location.
• Check the surroundings for possible hazards or obstacles. · Check that propellers are properly attached and not damaged.
• Check the transmitter batteries have sufficient charge before flying. This will prevent loss of control.
• Turn ON the transmitter first, and then turn ON the quadcopter. This will prevent loss of control.

During use

• Always keep the transmitter on while the quadcopter is in operation.
• Always keep your eye on the quadcopter.

After use

• Turn OFF the quadcopter first, and then turn OFF the transmitter. This will prevent loss of control.

a) Important safety
Caution, safety hazard! This model has the potential to cause damage to property and/or harm individuals. Ensure that you are sufficiently insured, e.g. by taking out private liability insurance. If you already have a policy, check with your insurance company that use of this model is covered by the policy. Important: In some countries, you are required to have insurance when using a model aircraft. Familiarise yourself with the local statutory regulations for using model aircraft. In Germany, for example, the regulations for model aircraft are stipulated in the German Air Traffic Act. Any breaches of the statutory regulations could lead to severe penalties as well as restrictions to your insurance cover.

b) General information

• The device is not a toy. Keep it out of the reach of children and pets.

• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.

• Protect the device from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, flammable gases, steam and solvents.

• Do not place the product under any mechanical stress.

• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. Safe operation can no longer be guaranteed if the product:
  – is visibly damaged,
  – is no longer working properly,
  – has been stored for extended periods in poor ambient conditions or
  – has been subjected to any serious transport-related stresses.

• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

• Consult an expert when in doubt about the operation, safety or connection of the device.

• If you have questions which remain unanswered by these operating instructions, contact our technical support service or other technical personnel.

9. Battery information and safety

a) General information

• Do not leave any batteries/rechargeable batteries lying around. There is a risk of batteries being swallowed by children or pets. If swallowed, consult a doctor immediately!
• Batteries/rechargeable batteries must never be short-circuited, disassembled or thrown into fire. There is a danger of explosion!
• Batteries/rechargeable batteries must not get damp or wet.
• Always observe the correct polarity (plus/+ and minus/-) when installing/inserting batteries.
• Leaking or damaged batteries/rechargeable batteries can cause chemical burns to skin. Wear suitable protective gloves when handling them.
• Liquids leaking from batteries/rechargeable batteries are chemically highly aggressive. Objects or surfaces that come into contact with them may take severe damage. Therefore, keep batteries/rechargeable batteries in a suitable location.

b) LiPo (Rechargeable) batteries

• Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire! Unlike conventional batteries/ rechargeable batteries (e.g. AA or AAA type), the casing of the LiPo rechargeable battery does not consist of a thin sheet but rather a sensitive plastic film only.
• Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount of heat is generated during charging.

c) AA (rechargeable) batteries

• (Rechargeable) batteries should be removed from the device if it is not used for a long period of time to avoid damage through leaking.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never recharge non-rechargeable batteries. There is a risk of explosion!

d) Charging the Quadcopter battery

• (If provided) only use the provided charger to charge the battery.
• Always remove and completely disconnect the battery from the model before charging.
• Never leave the battery unattended while charging.
• Never cover the charger and the battery when charging is in progress.
• Disconnect the battery from the charger when the battery is fully charged.
• The charger and the rechargeable battery must not get damp or wet. This may result in a fatal electric shock or cause a fire or explosion!
• Do not expose the charger or battery to extremely high/low temperatures or direct sunlight.
• Never use an excessive charging current. Observe the manufacturer’s specifications for the ideal/maximum charging current.
• Keep a sufficient distance between the charger and the battery while charging.
• Do not wear any metal or conductive materials, such as jewellery (necklaces, bracelets, rings, etc.) while you are working with the charger or battery. Short-circuit poses a danger of burns and explosion.
• When charging, place the battery on a heat-insensitive surface. It is normal that a certain amount of heat is generated during charging.

10. Operating elements

a) Quadcopter

1. Propeller “A”
2. Propeller “B”
3. Propeller guard
4. Propeller “B”
5. Propeller “A”
6. Battery cage
7. Battery socket
   **b) Transmitter (remote control)

**

8. SPEED/STUNT button
9. Throttle/rotate lever
10. HEADLESS mode
11. LED status indicator
12. Trim: Forward
13. RETURN/LED colour
14. Direction lever
15. Trim: Left
16. Trim: Backward
17. Power button
18. Trim: Right

11. Exploded parts

• A Upper shell
• B Positive blades (marked “A”)
• C Reverse rotor
• D Positive rotor
• E Damper
• F Reverse blades (marked “B”)
• G Positive rotor
• H Reverse rotor
• I Receiver board
• J Bottom shell

12. Getting ready for flight

a) Charge the quadcopter battery

Important:

• Only use the included charger to charge the battery pack. Disconnect the battery and remove it from the quadcopter before charging.
• USB power source: Before connecting, make sure that the USB power source can deliver sufficient current, otherwise you may damage the source. Do not use a USB port of a computer, keyboard or USB hub without a power adapter as the current supplied by these ports is insufficient.

Connect one end of the charger to the battery charging connector and the other end to a suitable power supply capable of delivering 5 V/DC 1000 mA via USB A.

b) Insert the transmitter batteries

1. Use a plus head screwdriver to open the battery compartment.
2.  Insert 2x AAA batteries, matching polarities shown inside the compartment.
3. Replace the cover.
   Use new batteries if the LED blinks slowly after switching it on.

c) Insert the quadcopter battery

• Slide the battery into the battery cage and check that it is secure.
• Do not connect the battery plug to the quadcopter battery socket until you are ready for takeoff.

13. Flying the Quadcopter

Important

• Please complete the steps outlined in “12. Getting ready for flight” on page 35
• Charge the quadcopter battery if you hear a beeping sound and the quadcopter LED blinks.
• Any time you disconnect the quadcopter battery, switch the transmitter power off then repeat the pairing process to re-establish the connection.
• Check that all parts are working correctly/no damage before flying.

a) Pair the transmitter with the quadcopter

1. Switch the transmitter ON by pressing the power button
   – The LED will blink slowly while waiting to connect to the quadcopter.
   – A beep will sound and the LED will be solid on when successfully paired.

2. Switch the quadcopter ON. – Insert the battery plug into the socket on the quadcopter to switch it ON.

b) Ready for take off

1. Place the quadcopter on a horizontal surface.
   – The LED will blink slowly if the surface is level.
   – The LED will blink rapidly and the quadcopter will not respond if the surface is not level.

2. Unlock the quadcopter.
   – Push the throttle lever up (a short beep will sound).
   – Pull the throttle lever down (a long beep will sound).
   – The quadcopter LED will be solid on when unlocked.

3. Calibrate the position sensors.
   – Pull both levers to the bottom right position at the same time.
   – The quadcopter LED will flash briefly then light solid.

4. The quadcopter is now ready for flight.

c) Controls
The drone will hold altitude without any throttle inputs.

d) Adjust trim

Important: It is recommended to fly within large unobstructed areas before adjusting trim.

Adjust the trim if the quadcopter does not hover in a neutral position when hands are off the throttle and direction lever.

1. Adjust the trim during flight for immediate results.
2. Adjust the trim:
   – Press once for small adjustments, press and hold for rapid adjustments.
   – The transmitter will beep to indicate that an adjustment has been made.
   – If there are no beeps it means you have reached the max. 50 adjustments.
   – The default trim setting is indicated by a long beep. E.g. Pressing the Back trim button 5x, then pressing the Forward trim button 5x will take you back to the default setting.
   – Settings will reset each time the quadcopter and transmitter are powered off.
   Note down any trim settings and apply after unlocking the quadcopter/before flight.

e) Adjust speed
Important

• Change the speed before take-off or while hovering.
• Do not adjust the speed while the quadcopter is moving.
• A higher speed setting will cause the battery to run down faster. · It is recommended to fly within large unobstructed areas before adjusting speed.

1. If adjusting before take-off, first unlock the quadcopter:
   – See section 13. b) 2. “Unlock the quadcopter”.
   – The quadcopter LED will be solid on when unlocked.

2. Press the SPEED button to cycle through speed settings: Low (1x beep) medium (2x beeps) high (3x beeps).

f) One key return
This function returns the drone back to the position it launched from.
Important

• Make sure there are no obstructions along the return flight path.
• Before returning, increase or decrease the altitude to avoid any obstructions.
• Press and hold the RETURN button to initiate the return. 2x beeps will sound.
• Press and hold the RETURN button to stop the return. 2x beeps will sound.

g) LED colour change

1. Unlock the quadcopter. See section 13. b)  “Unlock the quadcopter”.
2. Press the LED button to toggle through colour options.

14. Finished flying

1. Land the quadcopter.
2. Disconnect the quadcopter battery.
3. Turn the transmitter power off.

15. Headless mode

Consider turning headless mode on if you are a novice flyer.

• Headless mode: Left on the transmitter will turn the quadcopter left relative to your point of view.
• Normal mode: Left on the transmitter will turn the quadcopter left relative to the quadcopter point of view.

1. Unlock the quadcopter. See section 13.
   b) 2. “Unlock the quadcopter”.

2. Press the HEADLESS button to switch headless mode ON.
   – The transmitter will beep 1x.
   – The quadcopter LED will flash slowly.

3. Press the HEADLESS button to return to normal mode.
   – The transmitter will beep 1x.
   – The quadcopter LED will stop flashing.

16. Advanced manoeuvres

Important
There should be 2 m clearance from obstacles on all directions before performing maneuvers.

17. Replace propellers

Important
Always replace damaged blades. Make sure any new blades are inserted in the correct position (see below). Positive blades = A, reverse blades = B

18. Care and cleaning

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause damage to the housing and malfunctioning e.g. damage to electronics and discolouration of body.
• Before cleaning or servicing, remove the battery. Let all parts cool down completely.
• Remove all dust and dirt e.g. with a long-haired clean brush or compressed air.
• A soft cloth, slightly dampened, can be used to wipe the body.

19. Troubleshooting

20. Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number in the search box. You can then download the EU declaration of conformity in PDF format.

21. Disposal

a) Product
Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
Remove any inserted (rechargeable) batteries and dispose of them separately from the product.

b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used (rechargeable) batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labeled with this symbol to indicate that disposal in the domestic waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or wherever (rechargeable) batteries are sold. You thus fulfill your statutory obligations and contribute to the protection of the environment.

22. Technical data

Quadcopter
Motor ……………………………………….4x ø6 (615)
Functions………………………………….Return to home, altitude hold, headless mode, 360° flip
Material ……………………………………. ABS
Low battery warning …………………..yes
LED lights …………………………………7 colours
Speeds …………………………………….3
Trim………………………………………….50 levels
Rotors………………………………………ø30 mm
Dimensions (W x H x D) ……………..80 x 34 x 80 mm
Weight ……………………………………..17 g (without battery)

Transmitter (remote control)
Power supply…………………………….2x 1.5 V AAA batteries
Frequency range ……………………….2.402 – 2.479 GHz
Transmission power……………………< 10 dBm
Transmission range ……………………60 – 80 m (open area)
Channels ………………………………….4
Dimensions (W x H x D) ……………..100 x 63 x 36 mm
Weight ……………………………………..56 g

Quadcopter battery
Rechargeable battery …………………1S LiPo, 3.7 V 220 mAh
Type ………………………………………… HW851624P
Charging time ……………………………approx. 45 min
Flight time…………………………………approx. 5 mins
Dimensions (W x H x D) ……………..12 x 22 x 10 mm
Weight ……………………………………..6.8 g

USB charging cable
Input…………………………………………5 V/DC 1000 mA via USB-A
Output………………………………………4.2 V/DC 440 mA
Cable length ……………………………..37 cm (including plug)

Copyright 2021 by Conrad Electronic SE.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the technical status at the time of printing. Copyright 2021 by Conrad Electronic SE.
2250245_v3_0221_02_dh_m_2L

References

• Conrad Electronic » Alle Teile des Erfolgs
• Conrad Electronic – Alle Teile des Erfolgs
• Conrad Electronic » All parts of success
• Contact
• Download center
• Conrad Electronic Online Shop » Alle Teile des Erfolgs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>