PROJECT E BEAUTY PE705 Electric Facial Cleanser Set Instruction Manual

PROJECT E BEAUTY PE705 Electric Facial Cleanser Set

Safety Instructions

To ensure proper operation of this appliance, please read this instruction manual carefully before using the appliance and save it for further reference.

WARNING

• Do not use this appliance under the following conditions:
  – Children
  – Persons with skin conditions or allergies
  – While wearing makeup
  – Areas such as eyelids or throat
  – Areas where epilation or plastic surgery was performed

• Immediately stop using the appliance, and consult a specialist if you feel unwell.

• Do not attempt to modify, disassemble, or repair the appliance by yourself.

• Keep the appliance and packaging out of reach of children younger than 12 years old.

• If the appliance is not used for a long time, remove the battery to prevent a possible leakage.

Specifications

• Name: Electric Facial Cleanser Set
• Item No.: PE705
• Rated Voltage/Power: 3V/1.65W
• Type of Battery: 2AA 1.5V batteries (not included)
• Size: 131mmx 88mm x 41 mm
• Material: ABS, silicone, latex
• Executive Standard: Q/XMMJ1001-2015

Product Descriptions (Picture 1)

① Power Switch
② Battery Cover
③ Connection Pin
④ Silicone Cleansing Brush
⑤ Cleaning & Clearing Brush
⑥ Skin Refreshing Brush
⑦ Storage Case

Cleaning and Clearing Brush

Brush with 0.055mm soft bristles mase of PBT, thin and flexible bristles, effectively cleans deep down into the pros without damaging the skin.

Silicone Cleansing Brush

Brush is made of soft silicone, provides soft skin, increases blood circulation.

Skin Refreshing Brush

Latex brush in combination with exfoliation products exfoliates, removes dry patches and brightens the skin. It is recommended to use once a week.

Using thr Appliance

Tum the Battery Lock and remove the Battery Cover. Install 2AA batteries according to the battery compartment indications (picture 3) (batteries are not included).

Brush Head Replacement

Align the Brush Head with the Connection Pin and lock the position with a ·click”, the Brush Head is now firmly installed. To removed the Brush Head, hold it with your hand and pull it from the Appliance Baby (picture 4).

Daily Use

1. After installing the Brush Head you want to use, apply cleansing gel to the face or to the Brush Head.

2. Slide the Power Switch to “Low” to turn on the appliance and the low speed gentle cleansing mode.
   Gently move the facial cleanser in circular motion on the forehead, nose, chin, and cheeks for 20 seconds (picture 5).
   

3. If necessary, slide the Power Switch to “High” to change to high speed deep cleansing mode.

4. After use, rinse your face with water and apply moisturizing cream.

Cleaning and Maintenance

Make sure the appliance is turned off before you startcleaning it.

1. Clean the Brush Head with water after each use. This appliance cannot be immersed in water, it is recommended to clean separately the Brush Head and the Appliance Body.
2. Use a dry cloth to clean the Appliance Body.
3. Do not use water, alcohol, steel wool, abrasive cleansers or corrosive liquids to clean it. Doing so may result in malfunction or discoloration of the appliance.
4. In order to ensure the best cleansing result and avoid skin irritation, it is recommended to replace the Brush Head every 3 months

Eco-friendly Tips

Batteries contain substances harmful to our environment, please do not dispose them with the normal household waste, instead, hand them over to an official recycling point

Trouble Shooting

Batteries are out of power
Abnormal noise| Brush Head was installed incorrectly| Follow the instructions and install the Brush Head correctly
If the appliance has any other problem than the ones mentioned above, please contact your local retailer

Guarantee & Service

If you need service, information, or if you have any doubt, please visit www.projectebeaut.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>