PROJECT E BEAUTY PE012 Blue LED + Acne Light Therapy User Manual
- June 5, 2024
- PROJECT E BEAUTY
Table of Contents
- PROJECT E BEAUTY PE012 Blue LED + Acne Light Therapy
- Introduction
- Benefits of Blue Photon LED Therapy
- Safety Information
- What is Included
- Location of Controls
- Light Sensitivity Test
- Use of the Device
- Maintenance
- Specifications
- Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PROJECT E BEAUTY PE012 Blue LED + Acne Light Therapy
Introduction
Thank you for purchasing the Project E Beauty Blue LED + Acne Light Therapy Device. This device utilizes LED Photon methods to treat a variety of skin conditions. What separates this device from other beauty devices is the LED Photon feature. This function takes skincare to the next level and you will achieve results more effectively and faster than imaginable. Photon therapy works using the natural healing power of light to treat numerous skin issues utilizing the latest in LED technology. Exposing light to the skin surface activates the skin’s photoreceptors and let the skin cells absorb its energy. It accelerates cell biochemical circulation and stimulates the production of collagen. These safe, non-invasive technologies can be beneficial in the treatment of many skin conditions ranging from acne, wrinkles, spots removal to skin tightening. These utilized functions have been found to enhance oxygenation, stimulate dermal tissue, kill bacteria causing acne, and treat oily or combination skin problems. Although results can vary widely by individual and skin type, skincare treatment is appropriate for all types of skin. Cosmetologists and skincare specialists agree that these treatments, when properly performed, have no side effects. The treatment methods of this care routine an important component of your skincare routine and should only be used for cosmetic purposes. It is not intended in any way to diagnose, treat, cure, or prevent any disease.
Benefits of Blue Photon LED Therapy
- LED Photon Therapy
- The Photon Beauty Device, designed for facial beautification, uses natural light waves, which are transmitted by LEDs into the skin. The light activates photoreceptors in skin cells, producing energy for absorption by skin components, to beautify your complexion.
- Studies show that light enters the body as photons (energy) and is absorbed by the photoreceptors within cells. Massaging with Photon Beauty balances skin tone and enhances circulation. Light is known for helping with some beauty problems, for instance, inhibiting the formation of melanin pigment, fighting acne and dermatitis, and improving the look of pockmarks, scars, and wrinkles.
- BLUE LED (~415 nm)
- The Blue LED photon penetrates the skin approximately 0.5mm. It’s optimized for use with rashes and is suitable for skin that is sensitive or constantly oily. Blue light can help to reduce acne and even tighten skin that has loosened. It can quickly inhibit inflammation and possibly even destroy harmful bacteria.
- How Often
- Perform each treatment for 10 minutes four times a week to start. Once the goal is achieved, use it only twice a week.
Safety Information
Precautions
- Read all instructions before using your Blue LED+ Acne Light Therapy Device and make sure you understand all of the operating instructions.
- Always check the device before use to ensure it is undamaged. The use of a damaged device can be unsafe.
- Stop immediately, if you experience any adverse effects or have a concern regarding use.
- Do not look directly or shine light in the eyes while in operation.
- Do not use on eyelids; do not place the light over eyelids.
- Do not use it if you are pregnant.
- Do not use it if you have experienced a migraine in the last two years.
- Do not use over any suspicious or cancerous lesion. Consult your doctor.
- Do not use the device while using any product that contains AHA or glycolic acid. This can cause unwanted levels of stress in the skin.
- Do not allow children to use the device unsupervised.
- Always unplug the device correctly by holding the plug and removing it from the electrical socket.
- Remember that improper maintenance or negligence can cause damage and void the warranty. This also refers to improper storage.
- Read these instructions, hold onto them, follow them, and always heed all warnings.
- Never use the device near water or areas of concentrated humidity.
- Disinfect the LED surface cover with a soft cloth and a light concentration of rubbing alcohol. Carefully clean the machine of all types of skin oil.
- Always use the device in line with the manufacturer’s regulations, and never block any of the ventilation openings on the side of the device.
- Dispose of all products in accordance with local and national regulations and codes.
- Do not use it if you are sensitive to light. If you are unsure whether you have increased sensitivity to light, we recommend you perform the Light Sensitivity Test instructed in this manual.
- Do no use if you are taking drugs known to make you sensitive to light. You may be sensitive to light and not know it. There are photosensitizing agents in drugs, food, soaps, cosmetics, and dyes.
- Drugs that are known to cause light sensitivity: Antibiotics; NSAIDS; Diures; Retinoids; Hypoglycemics, HMG-CoA reductase inhibitors (statins), Photodynamic Therapy drugs, Prophoto sensitizers, Neuroleptic drugs, or Antifungals.
- Do not use over or near a recent steroid injection. Doing so may result in a photosensitive reaction.
Warning
- Discontinue use if you encounter any discomfort or skin redness that lasts for more than two hours. You may have sensitivity to light or another condition. Consult your health care provider.
- Never operate this device if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or submerged in water. Return the device to Project E Beauty for examination and repair.
- Do not set or keep the device where it can fall or be pulled into a tub or sink. Keep away from water (including bath and shower). If the device accidentally falls in water unplug immediately.
- Keep away from flammable aerosol products.
- Do not use other AC Power Supplies or Chargers with your LED device.
- Turn off immediately, if the device begins to overheat.
Contraindications
- DO NOT USE if one of the following pertains to you.
- Light Sensitivity: Do not use if you are sensitive to light. You are sensitive to light if you experience any discomfort or skin redness that lasts more than two hours. Discontinue using the device and consult with your healthcare provider.
- Implantable Device: Do not use this device if you have a cardiac pacemaker, implanted defibrillator, shunt, or other implanted electronic device. This device contains magnets that may cause interference with these devices resulting in serious injury or death.
- Pregnant: Do not use if you are pregnant or think you might be pregnant. The device has not been tested on pregnant women and the effects, if any, are unknown.
- Migraine: Do not use it if you have experienced a migraine in the last two years.
- Seizures: Do not use if you have a history of light-triggered seizures.
- Lesions: Do not use this device over any suspicious or cancerous lesions. To do so may result in delaying the best medical treatment.
- Failure to use and maintain the device in accordance with the instructions outlined in this manual will invalidate the warranty.
What is Included
- Project E Beauty
- Blue LED Photon Device
- USB Cable
- Eye protectors (Not Shown)
- Owner’s Manual (Not Shown)
Location of Controls
Light Sensitivity Test
Recommended Before Use
- In order to determine if you have a Light Sensitivity Issue please follow the instructions below. It is recommended that you test a small, less sensitive area of skin (i.e., like your forearm).
- Press the “ON/OFF” button to turn on the device. Select either “Pulse” or “Continuous” mode and make sure the LED surface FULLY contacts the skin to activate the light.
- Place the device on an area of the forearm. Leave in contact with your skin for a 3-minute treatment cycle.
- Repeat by doing another 3-minute treatment on the same area of your arm.
- Wait 24 hours. You should NOT experience any adverse reaction during the next 24 hours.
A bad reaction to light occurs if you have pain or discomfort in the treatment areas or any skin redness for more than two hours. It can be due to medication, supplements, or a possible skin issue.
Eye Safety
- Position the goggles over your eyes
- Tie the elastic band so that the goggles fit comfortably.
- It is NOT recommended to shine the light source directly into the eyes or the eyes of others.
Use of the Device
Before performing a treatment you should do the following
- Remove all jewelry and any metal objects.
- Check if absolute or relative contraindications exist.
- Check that the device is functioning properly and the electrical cord is not damaged.
- Ensure there are not any flammable materials near the workspace.
- Follow these steps when performing a treatment
- 1 Before you first use the device, charge it for 3 hours.
- For Charging
- Simply connect the USB cable to the common SV USB power source. Connect the cable to the charging jack on the massager.
- Charging
- This device can be used connected to AC or can be charged to be used without the AC cord. To plugin and charge the unit, perform the following
- Disinfect the surface with a soft cloth.
- Thoroughly clean the face with soap and water, and dry.
- Use a Hyaluronic Acid Serum, or cream on areas you will be working on to achieve the best results.
- You can purchase our Hyaluronic Acid Serum at www.projectebeauty.com
- It is highly recommended to put on the supplied eye protectors at this time.
- Press the ON/OFF button to turn the unit on; the Power indicator will light up.
- Cover your eyes with the goggles provided.
- Select “Continuous” mode for skin activation. The light will be automatically activated as it touches the skin. It provides constant light energy that lasts for 10 minutes. After that, it will switch off automatically.
- Select “Pulse” made for skin treatment. It provides a short specific pulse of light energy, which enhances the treatments.
- The light will be automatically activated as it touches the skin. The skin treatment will last for 10 minutes. You can repeat this process for all the desired areas.
Perform treatment for 10 minutes (except nose) four times a week to start. Once the goal is achieved, use it only twice a week. Place the device on the skin and move in the directions shown according to the desired effects.
- Tighten Skin
- Slowly move from the corner of the mouth towards the area near the eyes.
- Pull up Sides of Mouth
- Slowly move from the corner of the mouth slightly inwards and upwards.
Prevent Treatment on Eczema and Acne
Do not operate on the exact area of eczema, acne, etc., but use it on the surrounding skin to aid in natural healing.
- Double Chin
- Slowly move upwards from the chin to the bottom of the ear, then lift the device off the skin and move from the chin to the corners of the mouth.
- Always move upwards; do not move the unit downwards.
- Nose Care
- Slowly move the device around your nose and on the bridge of your nose for 1-2 minutes.
- Bags Under the Eyes
- Slowly move in the following directions: From the corners of the eyes to the temples to the top of the neck and down to the armpits.
- For”Continuous” mode, the device will automatically turn off after 10 minutes. For “Pulse” mode, it will automatically turn off after 10 minutes.
- You can press the NO/OFF button to turn the unit off.
Tips
When using the device, hold the LED surface FULLY in contact with the skin.
Maintenance
- Properly unplug the device by holding the plug and removing it from the AC outlet.
- After each use, disinfect the surface with a soft cloth.
- Immediately dry off any moisture, chemicals, or water on the device.
- Always keep the device clean and sterilized.
- Store the device in a dry place.
Specifications
- Blue Photon Wavelength — 415 nm
- Adaptor input power — AC 100-240V
- Adaptor frequencY — 50/60 Hz
- Adaptor output power — SV, 1 A
Warranty
Activate Your 1-Year FREE Warranty Now.
The product come with a full one-year warranty against manufacturer defects. It does not include damage caused by misuse, accident, abuse, neglect, or external causes. All we need is your name, email, and order ID. That’s all.
Scan the QR code or visit
www.projectebeauty.com/pages/warranty
Questions
- Website: www.projectebeauty.com
- Email: sales@projectebeauty.com
- Tel: +1-626-759-4232
Our customer care expert team is here to answer any question you might want to ask.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>