Xhorse XSDF Universal Remote Key User Manual

July 10, 2024
Xhorse

Xhorse-LOGO

Xhorse XSDF Universal Remote Key

Product Specifications

  • Model : XSDF Universal Remote Key
  • Battery Type : CR2032 (3V)
  • Frequency Band : RFID (433.92 MHz)
  • Max Power : -28.18 dBm

Product Usage Instructions

Changing the Battery:

  1. Press the backside button to release the mechanical key holder.
  2. Insert a tool into the gap to separate the shell.
  3. Remove the old battery and replace it with a new CR2032 3V battery. Ensure correct polarity.
  4. Reassemble the key as before.

Pairing Method:
To pair with a vehicle, refer to the specific instructions provided for your vehicle model.

Overview

XSDF Universal Remote Key is suitable for vehicle which contains the Xhorse receiver.

Note : The operating temperature of the product is -20–50℃.

Button description

Xhorse-XSDF-Universal-Remote-Key-FIG- \(1\)Change battery

First use or when the battery runs out need to change new battery, following steps:

  1. Press the back side button for loose the mechanical key holder

  2. Use the tool into the gap to separate the shell

  3. Take the battery out and replace new one
    Note : The battery type is 2032 with 3V, ensure the positive and negative of battery is correct.

  4. Install the key same as before

Xhorse-XSDF-Universal-Remote-Key-FIG- \(2\)

Pairing method

Pairing with vehicle: Referring to the corresponding vehicle models to match.

FCC statements

Labeling requirements.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CE & UKCA statements:
Frequency Band(s)
This device operates with the following frequency bands and maximum frequency power.

Note : The product is compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model.

RFID (433.92 MHz) Max Pe.r.p. is -28.18 dBm

EU & UKCA DECLARATION OF CONFORMITY
Hereby, Shenzhen Xhorse Electronics Co., Ltd. declare that Universal Remote Key with model XSDF is in compliance with Directive 2014/53/EU, 2011/65/EU and RER 2017 (SI2017/1206)

FAQ

How do I change the battery of the XSDF Universal Remote Key?
To change the battery, follow these steps:

  1. Press the backside button to release the mechanical key holder.
  2. Insert a tool into the gap to separate the shell.
  3. Replace the old battery with a new CR2032 3V battery, ensuring correct polarity.
  4. Reassemble the key as before.

How do I pair the XSDF Universal Remote Key with my vehicle?
To pair the remote key with your vehicle, refer to the specific instructions provided for your vehicle model.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals