iHip WLG-PP32 SoundPods User Manual
- June 6, 2024
- iHip
Table of Contents
iHip WLG-PP32 SoundPods
Introduction:
- Multi-Function Button
- Charging Button
- Earbud LED Indicator
- Charging Dock & LED Indicators
- Volume Track Control
Important information
- Both earbuds will automatically pair to each other when turned on. When Successfully paired, one of the two earbuds will flash red and blue while another will slowly flash blue.
- The earbuds will power off if they don’t connect to any device within 5 minutes.
PAIRING YOUR EARBUDS
- Turn on the Bluetooth on your device
- Long press the multifunctional button for 3 sec to power SoundPods on. when earbuds LED indicators flash red and blue, they are ready to pair
- Choose SoundsPods to your list to connect
- When the Earbud LED Indicators slowly flash blue, they are successfully paired
Bluetooth usage:
Making phone calls:
Be sure the earbuds are connected with your mobile phone. Once connected you
can make phone calls. When making calls both earbuds will be working.
- To answer a call, short press the earbud Multi-function button one time.
- To end a call , short press the earbud Multi-function button one time.
- To reject calls, long-press the earbud Multi-function button
- You can dial the last number by quick pressing the earbud Multi-function button twice
Listening to music:
Be sure the earbuds are connected with your mobile phone.
- To Pause/resume music, short press the earbud Multi-function button one time.
- To play the next track, short press the earbud volume”+” button.
- To play the previous track, short press the earbud volume ” -” button.
- To increase the volume, long-press the earbud volume “+” button
- To decrease the volume, long-press the earbud volume “-” button
Power off:
Long press the earbud Multi function button for 5 seconds to power off the earbud. The Earbud LED indicator will flash red 3 times indicating that the earbud has been powered off The earbuds will power off if they don’t connect to any device within 5 minutes. _
Charging your device
Charging your earbud{s):
- The will be a tone sound to indicate the earbuds need to be charged
- Place earbuds onto the charging dock and press the charging button to begin charged.
- The earbud(s) LED Indicator will turn red while charging and will turn off when fully charged
Charging your dock:
While charging the dock, the LED Indicators will flash red and will change to a solid red when fully charged.
Specifications:
- Bluetooth version:V5.0
- Earbud Battery Capacity: 60mah each
- Charging Dock Battery Capacity: 400mah
- Play Time: Up to 21 hrs
Features:
- Auto Connect Technology
- Built-in Microphone
- Up to 21 hrs of play and charge t ime
- Connect wirelessly to iOS & Android devices
- Ergonomic ic design for a comfortable fit in your ear
Attention:
- Handle with care. Do not throw, sit on, or store the SoundPods under heavy objects. Keep away from high temperatures and environments with high humidity. Store In an environment with a temperature between -1 o·c – 60″C
- Keep away from high-frequency transmitting equipment such as WIFI routers which may cause sound interference or disconnection
- This product is a compatible with both iOS® and Android™ devices
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or telev1s1on reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician to help
Caution:
Any changes or modifications to this device not explicitly approved by the
manufacturer could void your authority to operate this equipment. This device
complies with part 15 of the FCC Rules. Operation n is subject to the
following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
www.iHip.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>