timberk T-VGS02 Vertical Garment Steamer Instruction Manual
- October 31, 2023
- TIMBERK
Table of Contents
timberk T-VGS02 Vertical Garment Steamer
Product Information
Model: T-VGS02
Brand: Timberk
Power: 2000W
Voltage: 220-240V~/50Hz
Dimensions: 35cm x 43.5cm x 13.2cm
Product Usage Instructions
- Before using the steamer, read the instruction manual carefully and keep it for future reference.
- Check the voltage indicated on the rating label before turning on the steamer for the first time.
- Ensure that the device is placed on a stable surface.
- Fill the water tank with clean water, ensuring not to exceed the maximum fill line.
- Plug in the steamer and wait for it to heat up.
- Gently press the steam button to release steam. Move the steamer nozzle over the garment in an up and down motion, keeping it a few inches away from the fabric.
- For stubborn wrinkles, hold the steamer nozzle closer to the fabric and use a sweeping motion.
- When finished, unplug the steamer and allow it to cool down before storing.
- Regularly clean the water tank and remove any limescale build-up to ensure optimal performance.
Please note that these instructions are a summary. For more detailed information, refer to the instruction manual provided with the product.
Dear customer!
We thank you for your wise choice and for a purchase of a steamer. It will
serve you for a long time.
IMPORTANT INFORMATION
Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.
IMPORTANT!
Important safeguards and descriptions contained in this manual do not include
all possible situations that you may experience using the device. The
manufacturer is not responsible for damage of the appliance or its parts
during transportation, as a result of incorrect installation or voltage
fluctuations, as well as when any part of the appliance has been changed or
modified.
NOTE
There is a label on the device which has all the necessary technical data and
other useful information about the device. Use the appliance only for the
purpose specified in this manual.
SAFEGUARDS
When using a steamer, a number of precautions must be observed. Improper operation due to ignoring the precautions may result in injury to the user and other people, as well as damage to their property.
- Please read the instruction manual before use and save it for future references.
- Before the first switching on check that voltage indicated on the rating label corresponds to the mains voltage in your home.
- For home use only. Do not use for industrial purposes. Use the steam iron only for its intended use.
- Do not use outdoors or in damp area.
- Never pull the cord while disconnecting from the power outlet; instead, grasp the plug only and pull to disconnect.
- Keep the cord away from sharp edges and hot surfaces.
- Always unplug the steam iron from the power supply when filling with water or emptying and when not in use.
- To prevent risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened DO NOT TOUCH the appliance, unplug it immediately and check in a service center.
- If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified personnel in order to avoid injury.
- The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Сleaning and user maintenance shall not be made by children without supervision.
- Do not attempt to repair, adjust or replace any parts of the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
- Children should be supervised to ensure that they do not play with the appliance.
- ATTENTION: Pour water into water tank only when the device is switched off from electric mains.
- To avoid scalding please always unplug the garment steamer before attaching or detaching the fabric brush and allow it to cool completely.
- The garment steamer generates high temperatures of steam. Do not touch the steam head, make sure the steamer is facing away from you in an upright position.
- During steaming, keep the device away from the body to avoid contact with hot steam coming out of the holes.
- If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
- Do not use accessories other than those supplied.
APPOINTMENT OF THE DEVICE
The garment steamer is easy to use and is perfect for removing
wrinkles/creases from garments and curtains as well as refreshing furnishing
fabrics.
SPECIFICATIONS
Technical characteristics
Specifications of the device are shown in Table 1.
| Parameter | Units | T-VGS02 |
|---|---|---|
| Nominal power consumption | W | 2000 |
| Voltage/frequency | V/Hz | 220-240~/50 |
| Steam rate | g/min | 35 |
| Cord length | m | 1.7 |
| Water tank | L | 2.3 |
| Net weight | kg | 4.3 |
| Dimensions | mm | 385х435х1320 |
DEVICE DESCRIPTION
- Steamer head
- Steam hose
- Spring
- Water tank
- Steam adjustment knob
- Telescopic stand
- Hanger
- Board
- Handle for moving
The appearance of the device may differ from the images in the manual
DELIVERY SET
- Steamer – 1 pc.
- Brush – 1 pc.
- Water tank – 1 pc.
- Board – 1 pc.
- Hanger – 1 pc.
- Instruction manual – 1 pc.
- Warranty card – 1 pc.
- Packing – 1 pc.
PREPARATIONS
- Unpack the appliance.
- Before connecting the appliance to mains, assemble it fully and properly.
- Adjust the telescopic stand to the comfortable height.
- Secure the stand height, using stand height adjustment locks.
- Insert the stand into the stand hole.
- Attach the hose to the hose connector and screw it.
- Install the hanger in the special holes on the stand.
WATER FILLING
- Pull the tank handle and detach the water tank.
- Unscrew the lid.
- Fill the water tank. Please observe the maximum level mark, do not overfill.
- Screw and tighten the tank lid.
- Install the tank in place.
- If the tank is empty, first turn off the steamer, then unplug it and add water.
- Place the assembled appliance on a firm and level surface. The appliance is ready for operation.
STEAMING
OPERATION
- Connect the appliance to mains.
- Hang the clothes on the hangers for steaming.
- For more convenient steaming the device is equipped with horizontal board.
- To install the ironing board, attach it to the installed hanger using two clips located at the bottom of the board.
- Turn the regulator.
- Place the brush on the nozzle.
- The appliance is ready for steaming.
STEAMING
- Move the steamer attachment slowly up and down along the clothes until you reach the desired result.
- Make sure that the hose is not twisted during operation.
- Touch the clothing with the attachment slightly during steaming.
- If steaming is performed in a horizontal position, lift hose frequently to allow the condensate to drain back.
WARNING: During steaming hold the attachment as far from the body as possible, to avoid contact with hot steam coming out of the attachment holes.
END OF OPERATION
- Turn the regulator to the “0” position.
- Unplug the appliance from mains. Let the appliance cool down for 30 minutes.
- Drain water from the tank completely.
- Retract the telescopic stand and move the appliance in a convenient place for storage.
CARE AND STORAGE
- Switch the device off and unplug it.
- Disassemble the hose and the telescopic stand, and set them aside separately.
- Drain the water from the reservoir for this unscrew the cap to remove the water from the tank.
- The remaining water must be removed by unscrewing the plug at the bottom of the device.
- ATTENTION: Before draining the water you must wait until the device has cooled (about 30 minutes), in order to avoid burns when draining hot water.
- Wash the base unit.
- Switch off and unplug the appliance; let it entirely cool.
- Complete all requirements of Chapter CARE AND STORAGE.
- Keep the appliance in a dry cool place.
SCALE REMOVING
- Using distilled or demineralized water will reduce the frequency of cleaning. However, you can also use plain water.
- The scale settles on the main parts and assemblies of the steamer over a period of time. To remove scale from the steamer, it is recommended to carry out the cleaning (descaling) procedure monthly.
- For cleaning, prepare the following solution: vinegar (50%) and water (50%). It is sufficient to prepare two cups of this solution.
- Slowly pour the solution into the tank.
- Perform one operating cycle with this solution. Then rinse the tank with running water.
- Run another work cycle with clean water to remove any residual solution from the device.
UTILIZATION RULES
- The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point. For additional information about actual system of the garbage collection address to the local authority.
Valid utilization will help to save valuable resources and avoid negative work
on the public health and environment which happens with incorrect using
garbage. After the lifetime of the device expires, it should be recycled in
compliance with the laws, rules and methods in region of recycling. Detailed
information about the recycling of the device, you can receive from a
representative of the local authorities, after providing full information
about the device. The manufacturer and authorized organization of the
manufacturer do not carry responsibility for the fulfillment by the Buyer of
the requirements of legislation on utilization and methods of utilization of
the device selected by the Buyer. The lifetime of the device is indicated in
the warranty card. Warranty period for the device and warranty terms are
specified in the warranty card. The warranty card is an integral part of the
documentation supplied with this unit. If there is no warranty card in the
delivery set, ask for it from the Seller. The warranty card provided by the
Seller must conform to the manufacturer’s form. The manufacturer and the
authorized organization of the manufacturer remove responsibility for any
possible harm which can be caused to people, animals or property directly or
indirectly, if this harm occurred as a result of noncompliance with the rules
and operating conditions, installation of the device, intentional or reckless
actions of the user- and / or third parties, as well as in situations caused
by natural and / or anthropogenic accidents.
www.timberk.ru