ATVEL Tune S5 ProX ANC Wireless Earbuds User Manual
- June 12, 2024
- ATVEL
Table of Contents
ATVEL Tune S5 ProX
ANC Wireless Earbuds
User Manual
What’s in the Box
| ATVEL Tune SS ProX
---|---
| Charging Case
| Ear Tips (XS, S, M, L)
| USB-C Cable
| User Manual
Product Diagram
1. Touch control zone
2. Microphone
3. Earbuds LED indicator
4. Charging contactor| 5. USB-C charging port
6. Charging case
7. Reset button
8. Battery level indicator
---|---
Charging
- Fully dry off the earbuds and the USB-C port before charging.
- Remove the insulating film on the earbuds before using this device.
- Open or close the charging case to activate the case battery level LED indicator.
- Place earbuds back into the charging case and the earbuds will start charging.
- Fully charge both the earbuds and the charging case before the first-time usage.
• Connect USB-C cable for charging
• Wireless charging (not included)
Specification
| Bluetooth version | V5.2 |
|---|---|
| Bluetooth frequency | 2.402GHz-2.480GHz |
| Bluetooth transmitted power | <7dBm (for EU) |
| Bluetooth profile | A2DP, AVRCP, HFP, HSP |
| Maximum working range | 15m(without obstacles) |
| Battery capacity | 40mAh x 2(earbuds); 500mAh(charging case) |
| Charging time | 1 hour(for earbuds); 2 hours(for charging case via USB-C);3.5 |
hours(for charging case via wireless charger)
Playtime| ANC OFF—Up to 6 hours, Totally 30 hours with the charging case
(varies by volume level and audio content); ANC ON—Up to 5 hours, Totally 25
hours with the charging case (varies by volume level and audio content)
Input| 5V — 1A
Dimensions| 56mmx65mmx31mm
Weight| 52g
How to Fit
Note: it may affect the noise cancelling effect if you are not wearing the earbuds correctly.
- Take tip fit test to ensure the correct size.
- Identify the left and right earbuds.
- Place the earbuds in your ear canal and rotate to lock.
Pairing
-
First-time Pairing with Device
Step 1: Open the charging case, and the earbuds will automatically power on and enter pairing mode.
Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
Step 3: Select “ATVEL Tune S5 ProX” from the list of Bluetooth devices shown (if a password is needed, type ‘0000’).
Notes:
• The earbuds will automatically connect with the device they were last paired with when the case is open.
• Each earbud could be used independently. -
Connect to a New Device
Option A
Step 1: Unpair the earbuds from the Bluetooth-enabled device that’s connected. The earbuds will disconnect from the current device and enter pairing mode for another pair.
Step 2: Search on the new device and connect.
Option B
Step 1: Place both earbuds back into the charging case and make sure they are being charged. Keep the lid open, then press and hold the charging case button for 3 seconds until the LED indicators on earbuds flash in blue rapidly.
Step 2: Search on the new device and connect.
-
Pairing and Connecting two Bluetooth devices simultaneously
Step 1: Pair with the first device and stay connected.
Step 2: Keep the earbuds in the charging case, then tap and hold the charging case button for 3 seconds until the LED indicators on earbuds flash blue rapidly, and then the earbuds enter pairing mode and will disconnect from the first device.
Step 3: Search on the second device to connect the earbuds.
Step 4: Manually reconnect the earbuds on the first device.
Note: The earbuds will automatically connect to both two devices after
finishing setting up the multipoint connection.
Functions
Power on/off
Open the charging case, the earbuds will automatically power on.Place the
earbuds back into the charging case and close the case, then the earbuds will
automatically power off.
Play Music
Play/Pause| | 1.
Tap twice (L/R)
Next track| | Tap triple (R)
Volume up| | Tap once (R)
Volume down| | .
Tap once (L)
**** Hands Free Conversation
Answer/End a call| | Tap twice (L/R)
Reject a call| | Tap and hold for 2s (L/R)
Answer and transfer two calls| | Tap triple (L/R)
Activate The Voice Assistante (L/R)
Voice assistant| | Tap and hold for 2s (R)
Noise cancelling control
Noise cancelling/ Ambient sound/ Normal| | Tap and hold for 2s (L)
Game Mode/Low Latency Mode
Game mode ON/OFF| | Tap triple (L)
Note:
- Turn on the game mode can drop latency to as low as 100ms and improve the gaming and watching video experience, but it will shorten the connection distance. We suggest you turn off the game mode when you use the earbuds for music.
- The normal mode provides latency about 200ms.
- Bluetooth technology can’t eliminate latency.
Earbuds LED Indictor
| Power on | Blue indicator flashes for 1 second |
|---|---|
| Power off | Red indicator flashes for 1 second |
| Pairing mode | Indicator flashes blue |
| Successfully connected | Indicator goes out |
| Factory reset | Indicator flashes purple |
Reset and Reconnecting
If you fail to build connection to either earbud, or between earbuds and Bluetooth device, please try the following steps:
- Place both earbuds into the charging case.
- Keep the charging case open, then press and hold the charging case button for at least 8s until both earbuds flash in purple, then earbuds have been reset successfully.
- Delete the old connection from the Bluetooth device and reconnect “ATVEL Tune $5 Prox”.
Troubleshooting
Q: Can I use both earphones separately?
A: Yes, each earbud could be used independently.
Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device, and make sure there is no radio or WIFI interference nearby.
Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.
Q: Is there volume control on the earphones?
A: Yes, touch L earbud once decreases the volume and touch R once could increase it.
Q: My earphones will not switch on.
A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer support for warranty cover.
Q: Is the charging case waterproof?
A: No, the earbuds are sweat & waterproof, but the charging case is not waterproof.
Q: Will the earbuds shut off automatically?
A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 10 minutes.
Q: How do | choose the aptX® codec for music playback?
A: In most cases, the device (audio source) by default chooses the best way to encode the audio signal: AAC for Apple devices and aptX® for Android devices. We recommend using the AAC codec for Apple devices and aptX® for Android devices to ensure the highest sound quality. To manually select the aptX® audio codec (or another codec supported by the earbuds — AAC, SBC) on the device, activate the Developer Options and select the required codec in the Bluetooth Audio Codec field. For more information on how to activate the Developer Options and select the codec, refer to the user manual of your device. Apple devices do not support the aptX® codec. If the audio source does not support any of the high-quality aptx® and AAC codecs, the earbuds will play music in standard quality (SBC codec).
Q: The sound is too loud (too quiet) even at the lowest (the highest) volume level. How to make it quieter (louder)?
A: To fine tune the volume, you can use a third-party application (equalizer). To set the volume below the minimum value, move the EQ sliders to the minimum value over the entire frequency range. To increase the volume, move the sliders to the maximum value. We have tested the following equalizers, but you can also use other applications: for Android: Equalizer & Bass Booster (by Coocent); Equalizer FX (by Zippo Apps); Wavelet (by pittvandewitt); Poweramp Equalizer (by Poweramp Software Design (Max MP)}; for iOS: Boom: Bass Booster & Equalizer (by Global Delight Technologies Pvt. Led); Equalizer Fx: Bass Booster App (by Twin Bit Ltd); Equalizer+ HD Music Player (by MWM).
Customer Service
For more information:
Please Email to: support@atvel.com
www.atvel.com
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type
Disposal of a battery into fire or a hot even, or mechanically crushing or
cutting of a battery, that can result in an explosion; Leaving a battery in an
extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas;
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Earfun Technology (HK) Limited is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its
subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries. aptX is a trademark of Qualcomm Technologies
International, Ltd., registered in the United States and other countries.
Other trademarks and trade names are those of their respective owners.
EU Declaration of Conformity
Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/ 65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.atvel.com
UK Declaration of Conformity
Hereby, [Earfun Technology (HK) Limited] declares that the radio equipment type is in compliance with UK Radio Equipment Regulations (SI 2017/1206). The full text of the declaration of conformity is available at the following internet address: www.atvel.com
ISED Compliance Statements
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
FCC ID: 2AVIT-TW201 IC: 25936-TW201
MODEL: S5 Prox
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>