Acoustic Audio AA321B Mountable Indoor Speakers-Complete Features/User Guide
- June 5, 2024
- Acoustic AUDIO
Table of Contents
Acoustic Audio AA321B Mountable Indoor Speakers
Specifications
- PRODUCT DIMENSIONS : 4.5 x 3.5 x 3.5 inches
- ITEM WEIGHT : 1.3 pounds
- SPEAKER TYPE: Bookshelf, Center Channel
- BRAND: Acoustic Audio by Goldwood
- MOUNTING TYPE: Shelf Mount
- COLOR: Black
- POWER: 400 Watts per pair
- FREQUENCY RESPONSE: 150Hz – 20kHz
- EFFICIENCY/ SENSITIVITY: 88dB at 1 watt 1 meter
- IMPEDANCE: 8 Ohm
- WOOFER SIZE: 2.5″
- FULL RANGE POLYPROPYLENE SPEAKER SIZE (HXWXD): 3.5″ x 3.5″ x 4.5″
- WIRE TERMINALS: Quick Release Spring Loaded
- POWER SOURCE: Corded Electric
Introduction
The 2.5″ Polypropylene full range woofer of the AA321 bookshelf speakers have Butyl rubber surrounds for protection. The sealed cabinets’ heavy-duty ABS construction makes these speakers not only robust but also a sleek and elegant addition to any indoor system. A robust, fully directional swivel wall mount attachment and four wall screws are included with each speaker. Mount these discreet speakers around the listening area to add precise sound to your home surround sound system. To aim, the sound exactly where you want it, turn or tilt the speaker. These compact but sophisticated speakers include easy- release spring-loaded wire connections that make connecting to an existing surround sound system a breeze. They can be tucked into tight corners and high areas without compromising accuracy.
These multi-purpose indoor speakers deliver a punch with 200 Watts Peak Power per speaker. They were built to last, with heavy-duty ABS construction and sealed cabinets, so there’s no need to be concerned about wear and tear. They fit on any bookshelf and can be used with any audio system. They are 3.5″ high and make fantastic additions to any surround sound home theatre. It’s a no- brainer to add these speakers to your system because they provide full-range sound, 2-way capabilities, and unbelievable pricing.
WHAT’S IN THE BOX
- Speakers
HOW TO CONNECT
- The steps to connect a Bluetooth speaker are as follows.
- Pair the speaker with your phone.
- Turn on Bluetooth on your phone.
- Allow a few moments for the phone to connect.
- Connect and start listening to music.
Frequently Asked Questions
-
Is it possible to connect an old-school amplifier to the speakers using split copper speaker wire?
Yes, if the amplifier + and – have the spring stab style connector. That’s what’s written on the speakers’ backs. For the connection, you only need to strip back bare wire. If your amplifier has RC connectors, that’s a plus. They’re normally Red + White, and all you have to do is plug them into the amp. Then all you have to do is disconnect a connection at the speakers, which are also red + and white -. -
Can these speakers be used with the Audio-Technica AT-LP60 USB turntable?
Active speakers must be used to connect directly to the turntable; otherwise, the turntable and these speakers must be connected to an amplifier. -
Is there a back screw hole for installing these on a speaker stand?
Yes, and they come with brackets for attaching the speakers to the wall. -
Are these Bluetooth speakers, and if so, do they have volume control?
They are not Bluetooth-enabled, and the volume is controlled via stereo. -
What’s the best way to link these to a phone?
These aren’t built for phones, but they could be made to work. An audio adapter is required, as well as wires to connect the speakers to the adaptor. “Pinch connections” on the speakers clamp directly onto cable wires. Make sure you get the correct cords for the adaptor. -
I’d never experimented with surround sound before. Can I use an adaptor to connect these to an audio jack, or do I need a full surround sound system?
A home audio receiver is required. -
Can I link up the acoustic speakers to this device for extra sound? Will these speakers work with my 6-1victrolaent Centre, in back two aux 1red 1white?
No, a home audio receiver is required for the speaker. -
What’s the best way to hook up these speakers to a phono preamp?
I don’t believe that is possible because they must be connected to a power source. Even if it is possible, I’m not sure why you’d go to the trouble. These are just basic shelf speakers. -
How much does each speaker weigh?
Each speaker weighs 1.3 pounds (0.58967 kg) according to the spec sheet. -
Could these speakers be utilized in an RV with a television?
They could be used if the TV has a powered speaker output. This isn’t a set of powered speakers. Their bass output is also restricted. A compact powered sound bar with a sub-woofer is my recommendation. A compact subwoofer can be hidden beneath a chair or other piece of furniture. You’d probably think the sound was better.