Acoustic Audio by Goldwood RPS8 Rechargeable Battery Powered User Guide

Acoustic Audio by Goldwood RPS8 Rechargeable Battery Powered

Specifications

• BRAND: Acoustic Audio by Goldwood
• MODEL NAME: RPS8
• SPEAKER TYPE: Outdoor
• CONNECTIVITY TECHNOLOGY: Wireless, Bluetooth, USB
• MOUNTING TYPE: Plug Mount, Wheel Mount, Freestanding
• FREQUENCY RESPONSE: 100hz-20 kHz
• IMPEDANCE: 4 ohm
• SENSITIVITY: 125Db
• RECHARGE: 4 hours
• PLAYTIME: 6 hours
• CABLE: 3.5mm
• PRODUCT DIMENSIONS: 11 x 10 x 22 inches
• ITEM WEIGHT: 17.96 pounds
• BATTERIES: 3 Lithium Ion batteries

Introduction

Acoustic Audio RPS8 portable powered Bluetooth LED speaker, built-in Bluetooth receiver, 100hz–20kHz, 4 ohm at 125Db, rechargeable battery. It contains A full-featured remote control with EQ presets, a multi-color-changing LED light display, lighted volume controls, an integrated audio amplifier, and a graphical equalizer. It has recording to USB or TF disc, headphone output, wireless microphone, aux, guitar, and wired microphone inputs, built-in rechargeable battery that charges in 4 hours and operates for 6 hours, Connectors that are plug-and-play. Speaker dimensions (H x W x D) are 22″ x 11″ x 10″, it is foldable and lightweight, and it was created and engineered in the United States.  You can Use it while tailgating, camping, hiking, or at the beach. The portable speaker, 3.5mm to 3.5mm cord, DC converter, wireless microphone, and complete instructions are included in this listing and pricing.

WHAT’S IN THE BOX

• Portable Speaker
• Remote
• DC Adapter
• Wireless Mic
• 5mm Cable
• Instructions

HOW TO SETUP

• Ensure that Bluetooth is enabled on your device.
• Press and hold the button for 3 seconds to turn on the speaker if it isn’t already on.
• To begin pairing mode, hold down the Pair button for 3 seconds.
• Open your device’s Bluetooth settings menu.

HOW TO CONNECT TO PHONE

Open your device’s Bluetooth settings menu. Choose “AR SPEAKER” from the list of possible devices (you might have to scan for devices). Enter “0000” if your device requests a password.

HOW TO CHARGE

Put the plug of the charger into the Charge Port. Join the charger to an outside power supply. During charging, the Charging Indicator will turn red. When finished, the charging indicator will turn green.

HOW TO RESET

• When both the SOLO and MULTI signs are lit, press and hold the VOLUME and SOURCE knobs simultaneously for 7 seconds.
• After roughly a minute, your speaker will revert to its factory settings. It then goes back into setup mode and is prepared for configuration.

Frequently Asked Questions

Why won’t my Bluetooth speaker power up?

Check to see if your speaker has enough power. Even if you connect the USB charging cable, the speaker won’t immediately come on if the battery is dead. Before using the speaker, let it charge for about an hour.

A Bluetooth speaker that won’t charge has to be fixed.

Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.

Why won’t my phone and Bluetooth speaker pair?

If your Bluetooth devices aren’t connecting, they probably aren’t in pairing mode or are out of range. Try rebooting your devices or letting your phone or tablet “forget” the connection if you’re experiencing persistent Bluetooth connection issues.

Why does my Bluetooth speaker keep shutting off by itself?

Turning Bluetooth on manually in your Android’s settings should prevent it from automatically turning on and off. It’s possible that you need to adjust your power saving settings if your Bluetooth connection is cutting out due to low battery.

How can you tell if your speaker has enough juice?

The built-in lithium ion battery is fully charged if the CHARGE indication remains off when the speaker power is off and connected to an AC outlet. Even if the speaker is kept plugged into an AC outlet, the battery won’t be able to be charged any further after it has reached its maximum capacity.

Why is my Bluetooth speaker’s blue light flashing?

A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern.

Is WIFI required for Bluetooth speakers?

Instead of an internet connection, short-range radio waves are how Bluetooth operates. This means you don’t need a data plan or even a cellular connection for Bluetooth to function anywhere you have two compatible devices.

How can a Bluetooth speaker be disassembled without using screws?

The speaker’s terminals can be loosened using a screwdriver, but they shouldn’t be taken out. After that, place guitar picks between the magnet and speaker cone. Use only wooden picks; paper picks will break. To divide the speaker’s components, raise and lower the picks (there should be at least three of them).

Why does my Bluetooth automatically re-start when I turn it off?

You must turn off Bluetooth scanning in Android settings to solve this problem. Locate the Location option in the Settings app on your Android device by opening it and scrolling down. To configure it, tap the Wi-Fi and Bluetooth scanning options. Turn off Bluetooth scanning by using the toggle.

What causes my speaker to turn on and off repeatedly?

Your speaker’s circuit board or battery may occasionally be harmed. If the battery is damaged, it cannot hold a charge for a sufficient amount of time and continually shutting off.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>