Acoustic Audio Home Theater Surround 5.1 Speaker System Operational Manual
- June 4, 2024
- Acoustic AUDIO
Table of Contents
Acoustic Audio Home Theater Surround 5.1 Speaker System
Specifications
- Item Weight: 37 pounds
- Product Dimensions: 8.9 x 3.8 x 12.3 inches
- Item model number: HD516
- Speaker Type: In-Wall
- Recommended Uses For Product: Home Theater
- Mounting Type: Wall Mount
Descriptions
This in-wall/ceiling speaker system by Acoustic Audio by Goldwood is 5.1 high definition Series HD516. Two rectangular front in-wall HD speakers, two rounded rear in-ceiling HD speakers, one dedicated True Center channel in-wall HD speaker, and one 10″ HD speaker make up this system, which is ideally paired “a built-in HD subwoofer. The best entertainment bundle for creating a custom home theatre surround sound system. The speakers don’t take up valuable shelf or floor space because they install flush into any wall or ceiling.
Each speaker has been engineered to deliver the greatest possible sound. The entire system has genuine 6.5-inch speakers that can handle 1, 850 watts of power “titanium tweeters, butyl rubber surrounds, and Kevlar cones. The Quick- turn mounting arms on the speakers make installation simple. The white grills can be painted to match a particular style of decoration. There is speaker cord included. The subwoofer included in this set is not amplified. Use of this subwoofer requires an external amplifier.
How to use?
You must run the cords for in-wall speakers across your amp area after going up or down the wall. You will run the cords to your amp and along the ceiling for in-ceiling speakers. It is preferable to utilize a wall plate to decorate wherever the cables exit in your amplifier location.
Features
- Acoustic Audio by Goldwood HD516 six-piece house speaker two-way system, 20-300w per speaker, 8ohm, 6.5″ Woven fiber bulletproof woofers, 2 HD-650 wall speakers, 30hz-22 kHz, 98dB, and 2 HD-6 ceiling speakers.
- Butyl rubber surrounds, titanium tweeters that can rotate, Low profile housings, round cutout 7.875″, overall 9″, depth 3.25, rectangular cutout 7.375″ X 10.75″, overall 8.875″ X 12.25″, and
- HDS10 wall passive Sub speaker, 20-300 watts, 26hz-200hz, 10″ Woofer, cut out is 10.625″ X 10.625″, overall is 12″ X 12″, depth is 3.75″, This passive Sub requires a Ws1005 Sub amplifier.
- HD-6c wall center channel 3-way speaker, 20-350 watts, 33hz-22 kHz, two 6.5″ Woofers, 12mm soft dome tweeter, cut out is 19.25″
- Use for multiple room systems, surround sound, in-wall or in-ceiling home entertainment, A complete set of six in-wall and in-ceiling speakers is included in this listing and price.
Warranty and Support
You can get in touch with the manufacturer directly or find out more information on their website if you’d want a copy of the warranty for a product you saw on Amazon.com. Manufacturers’ warranties might not always be applicable, depending on things like how the product is used, where it was bought, and who sold it to you. If you have any issues, please read the guarantee, and then get in touch with the seller.
Frequently Asked Questions
Does the subwoofer have a single voice coil or two?
A solitary voice coil.
Do the speakers have a lid that hides the speaker when not in use?
They do indeed have white push-in grills. If you stand directly in front of the speaker, you can see the yellow speaker through the grill.
Are all the necessary wires included for setup?
No wires are present.
Please forgive my ignorance since I’m new to sound system setup, but how do the back ground speakers connect?
They supplied two cables with tiny connection ends. They keep moving. Speakers for automobiles typically employ such connection type. search for automobile speakers.
What would I need to purchase in order for these speakers to function if I were to purchase them?
You must use the necessary tools to make holes in your ceiling. Speaker wire and the rest of the package are included. On my setup, I chose to utilise wire that was bigger in gauge. I think the wire was a #16.
purchasing a Yamaha RX-A850. Is it possible to use the passive subwoofer by connecting it directly to the Yamaha RX-A850? if not, what is the usage?
A separate amp would be required for each passive subwoofer.
Is regular speaker wire appropriate for connecting the in-wall sub? A coax port is typically located on the back of in-wall gang boxes.****
These speakers have been in place for a while. Yes, regular speaker wire can be used to connect your subwoofer amp to the in-wall subwoofer if they are still being sold.
Are there various colour options for the speakers? Although there is another model with black instead of yellow****
I believe it to be of worse quality because you can still see the yellow through the mesh cover (but also lower price)
I believe it doesn’t come with a receiver; are I correct?****
You’re right; this is a speakers-only format.
How are the sound speakers connected to the television?****
Via an audio system
Will a subwoofer cable be required for the subwoofer?****
No, you require speaker wire, however you may attach the amp by adding banana connections to one end. It must be linked to your receiver’s sub amp input with its own amplifier. If you have a second amp built in, you won’t need a separate amp for it.
Do I require a different amp just for the sub? My receiver needs an RCA to connect the sub, which needs speaker wire…****
Yes, a subwoofer amplifier is necessary. look up “WS1005”
Can you use the wall speakers for surround sound and the circular speakers for front ceiling speakers?****
Yes, you can, however usually the front speakers are rectangular and the surround speakers are in the ceiling.
Are they loud enough when installed in the ceiling?****
Yes. Mine are suspended from the basement ceiling. The audio is fantastic. I keep picking up new words and noises from movies I’ve seen a hundred times. Excellent speakers
I know it’s a ridiculous question, but can you confirm which way the subwoofer fires? Right away?****
Yes, the submarine fires immediately. The newbie is considered when designing these speakers. really simple to install No need for directional baffles or trick boxes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>