Acoustic Audio by Goldwood CS-IC83 8” 3-Way In Ceiling Home Theater Speaker-Complete Features/User Guide

Acoustic Audio by Goldwood CS-IC83 8” 3-Way In Ceiling Home Theater

Speaker

Specifications

• CONNECTIVITY TECHNOLOGY: Coaxial, RCA
• SPEAKER TYPE: Outdoor, Woofer
• BRAND: Acoustic Audio by Goldwood
• MODEL NAME: FBA_CS-IC83-5S
• RECOMMENDED USES FOR PRODUCT: Home Theater
• TWEETERS SIZE: 13 millimeter
• FREQUENCY RESPONSE: 40Hz-20 kHz
• IMPEDANCE: 8 ohm
• MOUNTING DEPTH: 3.7 inches
• SPEAKER HOLE SIZES: 9.49 inches

Introduction

Classic Passive speaker design, simply drive power from your home audio receiver or amp. Wide sound dispersion designed speakers easily connect with new and current audio systems, traditional Passive speaker design, simply drive power from your home audio receiver or amp. (8) “Poly cone woofers with progressive spiders and butyl rubber surrounds, Poly Mica midranges, and 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity, frequency response is 40Hz-20kHz with 95dB at 8ohm, frequency response is 40Hz-20kHz with 95dB at 8ohm, frequency response is 40Hz-20kHz with 95dB at 8ohm, frequency response is 40Hz-20kHz with 95dB at 8oh

Pressure lock mounting mechanism attaches firmly to drywall, fits round speaker holes measuring 9. 49″ in diameter with a mounting depth of 3. 7″, and has an overall size of 10. 86” “ABS housings and grills can be painted to match your decor and have spring loaded raw wire connections. Any home audio receiver or amplifier with raw speaker wire outputs, with a power rating of no less than 10 and no more than 350 watts per channel, and CL3 rated in-wall certified raw speaker wire to connect your receiver to the speakers.

WHAT’S IN THE BOX

• 5 Acoustic Audio by Goldwood CS-IC83 speakers
• cut-out templates
• removeable grills
• instruction manual

HOW TO CONNECT

Press the bottom of the MODE knob until the “BLUE” flasher appears. “Bluetooth Ready” will be displayed on the speaker. To pair, go to your Bluetooth enabled device’s Bluetooth section and pick ” LS.” “Bluetooth Connect” will appear on the speaker, and ” BLUE” will stop flashing.

Frequently Asked Questions

• Is it possible to connect two speakers to a single channel?
  The short answer is yes, but it relies on various factors, including the receiver’s or stereo amp’s minimum Ohm rating, the type of speakers, and the speaker Ohms rating.

• Is it possible to connect to two speakers at the same time?
  Users of Android devices must go to Bluetooth Settings and pair Bluetooth headphones or speakers one at a time. After you’ve connected, go to the right- hand three-dot icon and select Advanced Settings. If it isn’t already on, turn on the ‘dual audio’ option. Users should be able to connect to two devices at the same time as a result of this.

• Is it possible to connect two different speakers at the same time?
  Use an app like AmpMe, Bose Connect, or a few from Ultimate Ears to transfer audio to multiple speakers, as well as Bluetooth 5, which sends audio to two devices at once. This article’s instructions are for Bluetooth speakers that are connected to Android, Amazon Echo, or Google Home devices.

• Is it necessary for each speaker to have their own channel?
  Unless you’re adding a subwoofer to a system, in which case a single- channel amp will suffice. Purchase a head unit with preamp outputs and an amplifier with line-level inputs when putting together your own automobile audio system

• What is the maximum number of speakers that an amplifier can support?
  The majority of amplifiers can handle a load of two speakers. Similar to a passenger on a small motorcycle: adding second passenger doubles the load the vehicle must carry, but most motorcycles can handle two passengers. Adding more than two speakers, on the other hand, will usually overload the amplifier.

• What is the formula for calculating speaker wattage?
  To figure out how many watts the speaker requires, multiply the number of volts by the number of amps. The wattage of a speaker operating at 110 VAC and 2 amps is 220 watts.

• Is it possible to connect Bluetooth speakers?
  You may be able to connect to two Bluetooth speakers at the same time, depending on your equipment. Bluetooth 5 is a newer technology that allows you to pair two devices at the same time. Similar solutions have been developed by other device manufacturers.

• Is it possible to use two Bluetooth speakers as a stereo system?
  Some speakers, such as JBL’s and Sony’s outstanding SRS-XB wireless Bluetooth speakers, let you select whether to make your pair of speakers into a stereo set by splitting the left and right channels or leave them both playing the same thing.

• What is the maximum number of ION speakers you can connect?
  All of the gadgets on display can connect up to 100 identical speakers or any combination of speakers. All of the products on this page can connect to one other product or one identical product

• What is the voltage used by speakers?
  They’re known as 70-volt speakers in Canada and the United States. The 100 V system is the most widely used in Europe, with amplifier and speaker devices simply labelled 100 V.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>