Acoustic Audio SLM1W Wall Slim Speakers Instruction Guide
- June 4, 2024
- Acoustic AUDIO
Table of Contents
Acoustic Audio SLM1W Wall Slim Speakers
Specification
- Speaker Type Surround Sound, Outdoor, Woofer
- Speaker Size 5 Inches
- Speaker Connectivity Wired
- Speaker Amplification Type Passive
- Model Name SLM1W
- Product Dimensions 25 x 1.5 x 10.5 inches
- Item Weight 2 pounds
- Color White
- Mounting Type Wall Mount
What’s in the box
- Speakers
Product Description
Acoustic Audio by Gold wood SLM1W Mountable On Wall Wired 2 Slim Speaker Set Only 1. 5 Inches Deep, simply hang like pictures on the wall Passive wired speaker design, drive power from your home receiver or amp Full Range sound coverage with 2-way woofer and tweeter configuration5. 25″ Treated paper cone woofers with rubber edge surrounds. 5″ High-temperature Mylar tweeters Frequency response is 60Hz-20 kHz with 91dB at 8ohmWhite Heavy Duty ABS cabinets with aluminum mesh grills Easy spring loaded wire connectors and recessed wire channel for flush wall placement Simple recessed notch for wall mounting and anti-vibration rubber wall pads Big Sound from a compact speaker size of (H x W X D) 10. 5″ x 7. 25″ x 1. 5″ each Not recommended for outdoor use System Requirements Any amplifier, home receiver or stereo with raw speaker wire outputs Power from your amp should be no less than 20 and no more than 120 watts per channelCL3 or raw speaker wire to connect your receiver to the speakers Applications Home Theater Surround Sound Systems Whole House Audio Systems Business or Retail Installations What’s in the box2 Passive Speakers1″ Self Tapping Mounting Screws Instruction Manual.
HOW TO CONNECT
- The steps to connect a Bluetooth speaker are as follows.
- Pair the speaker with your phone.
- Turn on Bluetooth on your phone.
- Allow a few moments for the phone to connect.
- Connect and start listening to music.
System Requirements
Any amplifier, home receiver or stereo with raw speaker wire outputs Power from your amp should be no less than 20 and no more than 120 watts per channel CL3 or raw speaker wire to connect your receiver to the speakers
Applications
- Home Theater Surround Sound Systems
- Whole House Audio Systems
- Business or Retail Installations
Features
- ON WALL SLIM WIRED SPEAKERS – 1. 5 Inch deep, low profile, ABS speakers easily install like hanging a picture on the wall
- FULL RANGE 2-WAY SOUND – 5. 25″ Treated paper cone woofers with rubber edge surrounds and . 5″ Mylar tweeters, frequency response is 60Hz-20 kHz with 91dB at 8ohm
- DURABLE AND MOUNTABLE – White ABS cabinets with aluminum mesh grills, spring loaded raw wire connectors, recessed mounting notch and wire channel. Big sound from a compact speaker size of (H x W X D) 10. 5″ x 7. 25″ x 1. 5″ each
- SYSTEM REQUIREMENTS – Any amp or receiver with raw speaker wire outputs, power from your amp should be no less than 20 and no more than 120 watts per channel, CL3 or raw speaker wire to connect your amp to the speakers
- WHAT’S IN THE BOX – 2 Acoustic Audio by Goldwood SLM1W speakers, mounting screws and instruction manual. Use for home theater surround sound, whole house audio systems, business or retail installations
- Power source type: Corded-Electric
Warranty & Support
If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.
Frequently Asked Questions
Are Acoustic Audio wall mounted speakers good?
In-wall speakers are exactly what you need if you have a room that is used for nothing but listening. When viewed from the appropriate angle, the sound they generate might seem otherworldly. In-wall speakers provide listeners with an astonishing field of sound and are frequently mounted at ear level.
How high should Acoustic Audio wall mounted speakers be?
While surround sound speakers should be positioned 4 to 6 feet above the ground or floor, centre and front-channel speakers should be positioned at or near ear level.
How do Acoustic Audio in-wall speakers work?
In-wall speakers are tuned while they are installed in a wall. This is taken into consideration during the design of the enclosure and the drivers, ensuring that once you install them at home, the system sounds identical to one from a speaker located farther away from the listening area.
Where do you Acoustic Audio mount speakers?
Remove your speakers from the closest wall by at least two to three feet. This will reduce sound reflections, which might impair the clarity of playback. the speaker’s stance (toe-in). In particular, aim your speakers at a spot immediately behind the listener’s head. Do this by angling your speakers inward.
How high can you Acoustic Audio mount speakers?
The upper left and right corners of the front stage should be where the height speaker channels are located. This will typically be 8 feet tall and 40 to 45 degrees off-axis. The speaker’s mid/high frequency response will be enhanced with a downward tilt, and ceiling bounce reflections will be decreased.
How do you mount rear Acoustic Audio speakers on the wall?
The keyhole slot on the back of the speaker can be used to attach the rear speakers to the wall. Wherever you want the speaker to hang, install a screw there. Then, slip the speaker onto the screw and let it hang. Alternatively, you can screw the speaker onto the mount using a bracket with a 1/4-20 thread.
Are Acoustic Audio on-wall speakers better than in-wall speakers?
On-wall speakers are typically a better option than in-wall speakers for commercial environments. They perform more powerfully and require less manoeuvring to position. Since they can adhere to any surface, there are additional mounting choices as well. In contrast, in-wall speakers look more covert but can’t provide as much power. Additionally, installation is more difficult because they have to be done inside a plasterboard wall.
What is a Acoustic Audio wall speaker system?
With speakers positioned at a height for ideal sound dispersion, a wall speaker system is made to deliver high-quality audio. Our systems come with speakers that can be mounted on a wall, an amplifier if necessary, and connection cords. All types of places can be accommodated with a variety of sizes and styles, and frequently practical features like Bluetooth technology are also present. In a variety of locations, such as pubs, restaurants, entertainment venues, schools, churches, retail establishments, and sports facilities, these systems are perfect for delivering background music.
Which Acoustic Audio speaker wire is positive?
The ground, or negative, wire is black, and the positive wire is red. However, the majority of speaker wires are colourless.
What happens if you connect Acoustic Audio speakers the wrong way?
Your speaker will be “out of phase” if it is wired incorrectly. In other words, it will go “back and forth” while the other speaker moves “forth and back.” The stereo separation and sound quality suffer as a result, even if your ears might not be able to hear it.