Qlight QTG-WIZ Wireless LED Steady- Flashing Tower Light User Manual
- June 5, 2024
- QLIGHT
Table of Contents
QTG-WIZ Wireless LED Steady- Flashing Tower Light
Wireless LED Steady/ Flashing Tower Light
QTG-WIZ
30 50
54 65
85dB
Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious
physical injury.
1. During wiring or maintenance, please completely turn off the power of the
product. (Failure to follow this may lead to an electric shock.) 2. Do not
install the product in locations that subjects it to excessive dust or water
other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may
cause a fire to the product, electric shock, physical injury, malfunction or
damage to the product.) 3. Do not alter or repair this product. If maintenance
or repair service is required, please contact your local Qlight contact point.
(Failure to follow these instructions may lead to fire, electric shock, or
product damage.) 4. Please apply the correct voltage to the product. (Failure
to follow these instructions may lead to fire, electric shock, or product
damage.) 5. When the product is applied to a condition that may impact lives
or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of
life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the
product, or malfunction of the product that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the
product. 2. Please turn off the power of the product immediately if it fails
to operate properly. 3. Carefully wire the product according to each product’s
specification. 4. Please be careful in preventing chemicals such as thinner,
benzene, etc. in contact with the surface of the product. 5. Do not apply
excessive force/impact to the product. 6. Failure to follow any of the
instructions above may cause malfunction or damage to the product, fire, and
electric shock.
Ordering Specifications
QTG60L-WIZ –
3
–
24
– RAG –
LW18
[Model number] |
· QTG60L-WIZ · QTG60L-WIZ-BZ · QTG60LF-WIZ · QTG60LF-WIZ-BZ · QTGA60L-WIZ ·
QTGA60L-WIZ-BZ · QTGA60LF-WIZ · QTGA60LF-WIZ-BZ [Layer count] |
· 1 Layer · 2 Layers · 3 Layers · 4 Layers · 5 Layers [Voltage] |
· 12-DC12V · 24-DC24V · 110/220 – AC110V~220V [Color] |
R-Red A-Amber G-Green B-Blue W-White [Mounting option] |
· (Blank) – Standard type · Mounting type – LB18 – LW18 – QZ18 – SZ18 – QL18 –
SL18 – QLA18
QTG70L-WIZ –
3
– 110/220 – RAG –
LW24
[Model number] |
· QTG70L-WIZ · QTG70L-WIZ-BZ · QTG70LF-WIZ · QTG70LF-WIZ-BZ · QTGA70L-WIZ ·
QTGA70L-WIZ-BZ · QTGA70LF-WIZ · QTGA70LF-WIZ-BZ [Layer count] |
· 1 Layer · 2 Layers · 3 Layers · 4 Layers · 5 Layers [Voltage] |
· 12-DC12V · 24-DC24V · 110/220 – AC110V~220V [Color] |
R-Red A-Amber G-Green B-Blue W-White [Mounting option] |
· (Blank) – Standard type · Mounting type – LB24 – LW24 – QZ24 – SZ24 – QL24 –
SL24 – QLA24
1
Please scan the QR code for more detailed product information.
www.qlight.com
Ordering Specifications
· QTG60ML-WIZ
QTG60ML-WIZ – 3 – 110/220 – RAG
[Model number] |
· QTG60ML-WIZ · QTG60ML-WIZ-BZ · QTG60MLF-WIZ · QTG60MLF-WIZ-BZ · QTGA60ML-WIZ
· QTGA60ML-WIZ-BZ · QTGA60MLF-WIZ · QTGA60MLF-WIZ-BZ [Layer count] |
· 1 Layer · 2 Layers · 3 Layers · 4 Layers · 5 Layers [Voltage] |
· 12-DC12V · 24-DC24V · 110/220 – AC110V~220V [Color] |
R-Red A-Amber G-Green B-Blue W-White
· QTG70ML-WIZ
QTG70ML-WIZ – 3 –
12
– RAG
[Model number] |
· QTG70ML-WIZ · QTG70ML-WIZ-BZ · QTG70MLF-WIZ · QTG70MLF-WIZ-BZ · QTGA70ML-WIZ
· QTGA70ML-WIZ-BZ · QTGA70MLF-WIZ · QTGA70MLF-WIZ-BZ [Layer count] |
· 1 Layer · 2 Layers · 3 Layers · 4 Layers · 5 Layers [Voltage] |
· 12-DC12V · 24-DC24V · 110/220 – AC110V~220V [Color] |
R-Red A-Amber G-Green B-Blue W-White
· Wireless LED Steady/Flashing Tower light has monitoring and controlling feature via PC that consists of USB DONGLE and GATEWAY.
Application Software
USB DONGLE
GATEWAY
ROUTER (wireless signaling device)
Description
No.
Item
PC and mobile
1
Application
USB DONGLE
2
(WIZ32)
Description
PC Application would be a comprehensive control system by enabling the
setting, monitoring, control and log analysis of the wireless signaling
device. C# based application and software developer’s API are provided. Mobile
application can help to expand utility manager’s coverage.
USB DONGLE (WIZ32) can connect up to 32 wireless signaling device and is
connected to the PC through a USB port in serial communication. It does not
require a separate installation but simply insertion into a USB port for use.
Note : USB DONGLE does NOT support Mobile application.
GATEWAY
3
(GW768)
GATEWAY (GW768) can connect up to 32 wireless signaling device. Since it is possible to extend up to 24 GATEWAYs with a LAN ROUTER, they can connect up to 768 wireless signaling device. Note : GATEWAY supports Mobile application.
ROUTER
4
(A wireless signal
information device)
A wireless signaling device replaces an existing signaling device and converts the status data of production into wireless one so the control tower can control the status information of production equipment more easily and quickly. It functions to transmit (send) the status information of production equipment wirelessly and help the control tower control the wireless signaling device and send specified information to a worker.
2
Components of wireless system
1. Connection through USB DONGLE · USB DONGLE can be easily inserted in the
PC and this is a method suitable for building a small-sized single wireless
network
(up to 32 wireless control display lamps can be connected).
USB DONGLE
PC Wireless signaling devices
2. Connection through GATEWAY · Up to 768 wireless control indicators can be
connected by adopting multiple GATEWAYs. This is suitable for large-scale
business sites. · Smart phone can monitor or control the status of signaling
devices.
HOST PC
LAN ROUTER
1st
Smartphone
2nd
24th
3
Information of wireless system
1. ROUTER(Wireless Signaling Device) · The status information of the
production equipment can be recognized by using an external contact and the
status information are
transmitted to USB DONGLE or GATEWAY. ROUTER can receive control signal from
USB DONGLE or GATEWAY. · Please refer to wireless information table on the
label of the product.
Wireless Signaling Device
NAME
QTG60L-WIZ
GROUP ID 1
ROUTER NODE ID
1101
CHANNEL
11
PAN ID
01
· ROUTER Wireless information table reference
NAME
Model name
GROUP ID
· Designated GROUP ID by customer. Possible to set 1 to 24 GROUPS. · It must be set as same as receiver(USB DONGLE, GATEWAY).
ROUTER
NODE ID
· Designated NODE ID(Product ID) by customer. 32 ID’s are available. ·
Referring 1101, 11 represents channel number. NODE ID configuration is related
to the channel number.
(recommended)
CHANNEL
· Can select up-to 16 channels from 11 to 26. It must be configured same as receivers(GATEWAY and USB DONGLE).
PAN ID
· PAN ID can be set from 0 to 65535. It is wireless network identifier as an unique customer’s number and designated by manufacturer.
2. USB DONGLE · USB DONGE is a wireless transmitter & receiver that is suitable for a small network with less than 32 wireless signaling devices. · Please refer to wireless information table on the label of the product.
USB DONGLE
NAME
WIZ32
USB
GROUP ID 1
DONGLE CHANNEL
11
PAN ID
01
4
Information of wireless system
· USB DONGLE Wireless information table reference
NAME
Model name
GROUP ID
USB DONGLE
CHANNEL
· Designated GROUP ID by customer. Possible to set 1 to 24 GROUPS. · Possible
to use single unit per PC. GROUP ID must NOT be same as GATEWAY. · It must be
set as same as ROUTER(Wireless Signaling Device).
· Can select up-to 16 channels from 11 to 26. It must be configured same as
ROUTER(Wireless Signaling Device).
PAN ID
· PAN ID can be set from 0 to 65535. It is wireless network identifier as an unique customer’s number and designated by manufacturer.
3. GATEWAY · Suitable for large-scaled network over 32 wireless networks. One GATEWAY unit is a single group, can connect up to 24 groups. · Support Smartphone Application · Please refer to wireless information table on the label of the product.
GATEWAY
GATEWAY
NAME MAC ADDR. GROUP ID CHANNEL PAN ID
GW768 0.35.183.XXX.XXX.XXX 1 11 01
· GATEWAY Wireless information table reference
NAME
Model name
MAC ADDR.
· MAC ADDRESS designated by manufacturer. · MAC ADDRESS is used to set IP
address and network information by searching GATEWAY in the
network.
GATEWAY
GROUP ID
· Designated GROUP ID by customer. Possible to set 1 to 24 GROUPS. · GROUP ID must NOT be same as USB DONGLE. · It must be set as same as ROUTER(Wireless Signaling Device).
CHANNEL
· Can select up-to 16 channels from 11 to 26. It must be configured same as ROUTER(Wireless Signaling Device).
PAN ID
· Pan ID can be set from 0 to 65535. It is wireless network identifier as an unique customer’s number and designated by manufacturer.
5
Information of wireless system
4. Installation of PC Application (1) SERIAL TO USB DRIVER installation ·
There are two options of receiving & controlling the wireless signaling device
such as USB DONGLE and USB interface with the
GATEWAY. In both cases, `USB to serial device driver’ should be installed
(download it from Qlight website or http://blog.qlight.com). · Select x64 or
x86 EXE. file depending on your OS type. · Silicon Labs’ drivers are provided
as a device driver.
· After the installation completes, check if COM# Port is displayed in the
Device Manager of PC before connecting the USB DONGLE or the GATEWAY through a
USB PORT.
· COM# can vary depending on the PC environment.
(2) Installation of PC Application · The PC application is used to monitor,
set, and control the status information of a wireless signaling device. · In
case of using C# Library, please refer to the Library User Manual which is
provided separately. · Please download the PC Application from our website and
install it.
<= Please run .exe file. Software VERSION may be upgraded without notice.
**For the installation instruction and usage, please refer to manual. (3) For
the usage of API using DLL, please refer to manual.
6
Product Specifications
· QTG60L-WIZ
Model number
Layer count
Voltage
Current Certificate Weight Color
QTG60L-WIZ Steady
DC12V
0.150A
1
DC24V
0.110A
QTG60L-WIZ-BZ
AC110V~220V Max. 0.070A
Steadyw/ built-in
buzzer
QTG60LF-WIZ Steady/Flashing 2
DC12V DC24V
0.240A 0.160A
QTG60LF-WIZ-BZ
AC110V~220V Max. 0.100A
Steady/Flashing
w/ built-in buzzer
DC12V
0.330A
QTGA60L-WIZ
3
DC24V
0.220A
Steady
AC110V~220V Max. 0.120A
QTGA60L-WIZ-BZ
Steadyw/ built-in
buzzer QTGA60LF-WIZ 4
DC12V DC24V
0.420A 0.270A
Steady/Flashing
AC110V~220V Max. 0.150A
QTGA60LF-WIZ-
BZ
Steady/Flashing
DC12V
0.510A
w/ built-in buzzer 5
DC24V
0.320A
AC110V~220V Max. 0.170A
Coverage of AC model is AC100VAC to 240VAC.
0.44kg 0.44kg R-Red 0.54kg
0.53kg 0.53kg 0.63kg
R-Red G-Green
0.61kg R-Red 0.61kg A-Amber 0.56kg G-Green
0.70kg 0.70kg 0.80kg
R-Red A-Amber G-Green B-Blue
R-Red 0.78kg A-Amber
0.78kg G-Green
0.88kg B-Blue W-White
· QTG60ML-WIZ
Model number
Layer count
Voltage
Current Certificate Weight Color
QTG60ML-WIZ
Steady
1
QTG60ML-WIZ-BZ
Steadyw/ built-in
buzzer
QTG60MLF-WIZ
Steady/Flashing 2 QTG60MLF-WIZ-
BZ
Steady/Flashing
w/ built-in buzzer
3 QTGA60ML-WIZ
Steady
QTGA60ML-WIZ-
BZ
Steadyw/ built-in buzzer
4
QTGA60MLF-WIZ
Steady/Flashing
QTGA60MLF-
WIZ-BZ Steady/Flashing
5
w/ built-in buzzer
DC12V
0.150A
DC24V
0.110A
AC110V~220V Max. 0.070A
DC12V
0.240A
DC24V
0.160A
AC110V~220V Max. 0.100A
DC12V
0.330A
DC24V
0.220A
AC110V~220V Max. 0.120A
DC12V
0.420A
DC24V
0.270A
AC110V~220V Max. 0.150A
DC12V
0.510A
DC24V
0.320A
AC110V~220V Max. 0.170A
0.29kg 0.29kg R-Red 0.39kg
0.37kg 0.37kg 0.47kg
R-Red G-Green
0.46kg R-Red 0.46kg A-Amber 0.56kg G-Green
0.54kg R-Red
0.54kg 0.64kg
A-Amber G-Green B-Blue
R-Red 0.62kg A-Amber 0.62kg G-Green 0.72kg B-Blue
W-White
· QTG70L-WIZ
Model number
Layer count
Voltage
Current Certificate Weight Color
QTG70L-WIZ Steady
DC12V
1
DC24V
0.150A 0.110A
QTG70L-WIZ-BZ
AC110V~220V Max. 0.070A
Steady w/ built-in
buzzer
QTG70LF-WIZ Steady/Flashing 2
DC12V DC24V
0.240A 0.160A
QTG70LF-WIZ-BZ
AC110V~220V Max. 0.100A
Steady/Flashing
w/ built-in buzzer
DC12V
0.330A
QTGA70L-WIZ
3
DC24V
0.220A
Steady
AC110V~220V Max. 0.120A
QTGA70L-WIZ-BZ
Steadyw/ built-in
buzzer QTGA70LF-WIZ 4
DC12V DC24V
0.420A 0.270A
Steady/Flashing
AC110V~220V Max. 0.150A
QTGA70LF-WIZ-
BZ
Steady/Flashing
DC12V
0.510A
w/ built-in buzzer 5
DC24V
0.320A
AC110V~220V Max. 0.170A
Coverage of AC model is AC100VAC to 240VAC.
0.57kg 0.57kg R-Red 0.67kg
0.69kg 0.69kg 0.79kg
R-Red G-Green
0.84kg R-Red 0.84kg A-Amber 0.94kg G-Green
0.99kg 0.99kg 1.09kg
R-Red A-Amber G-Green B-Blue
R-Red 1.23kg A-Amber
1.23kg G-Green
1.32kg B-Blue W-White
· QTG70ML-WIZ
Model number
Layer count
Voltage
Current Certificate Weight Color
QTG70ML-WIZ
Steady
1
QTG70ML-WIZ-BZ
Steadyw/ built-in
buzzer
QTG70MLF-WIZ
Steady/Flashing 2 QTG70MLF-WIZ-
BZ
Steady/Flashing
w/ built-in buzzer
QTGA70ML-WIZ 3
Steady
QTGA70ML-WIZ-
BZ
Steadyw/ built-in buzzer
4
QTGA70MLF-WIZ
Steady/Flashing
QTGA70MLF-
WIZ-BZ Steady/Flashing
5
w/ built-in buzzer
DC12V
0.150A
DC24V
0.110A
AC110V~220V Max. 0.070A
DC12V
0.240A
DC24V
0.160A
AC110V~220V Max. 0.100A
DC12V
0.330A
DC24V
0.220A
AC110V~220V Max. 0.120A
DC12V
0.420A
DC24V
0.270A
AC110V~220V Max. 0.150A
DC12V
0.510A
DC24V
0.320A
AC110V~220V Max. 0.170A
0.45kg 0.45kg R-Red 0.55kg
0.59kg 0.59kg
R-Red G-Green
0.69kg
0.80kg R-Red 0.80kg A-Amber 0.90kg G-Green
0.95kg 0.95kg 1.05kg
R-Red A-Amber G-Green B-Blue
R-Red 1.10kg A-Amber
1.10kg G-Green
1.20kg B-Blue W-White
7
Dimensions
· QTG60ML-WIZ / QTG60L-WIZ
(Units : mm)
· QTG70ML-WIZ / QTG70L-WIZ
· GATEWAY
· USB DONGLE
8
Wiring Instructions
· Please wire the product as followings when you control via wireless network
AC/DC Steady/ Flashing
Connection by USB Connection via USB DONGLE
Connection via GATEWAY
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
White Black
Fuse
Power
White Black
Fuse
Power
AC/DC Steady/ Flashing
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
Suitable for single or small-scaled network. Can connect up to 32 devices
Connection by ETHERNET
Connection via GATEWAY and Ethernet ROUTER
WAN
LAN
White Black
Fuse
Power
Suitable for large-scaled network. One GATEWAY unit is a single group, can connect up to 24 groups, 768 devices (each group can connect to 32 devices)
· AC Steady type, AC/DC Steady/ Flashing type : External power line – UL1015 AWG18(0.75sq)×2C 400mm
9
Wiring Instructions
· Please wire the product by referring below instruction. · You can monitor status of tower light and control them via wireless network.
AC/DC Steady
Wiring using external contact
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
DC Steady/ Flashing
Red Amber Green Blue White Brown
External contact
Steady
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Buzzer
Black
White
Black
Fuse
Power
· QTG(A) (M)L-WIZ – Same wiring including buzzer type
· QTG L
Lens diameter 60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
AC Steady/ Flashing
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
Red Amber Green Blue White Brown
Black Violet White Black
External contact
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Buzzer
Flash Steady
Common
Fuse
Power
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
Red Amber Green Blue White Brown
Black Violet White Black
External contact
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Buzzer
Flash Steady
Common
Fuse
Power
· QTG(A) (M)L-WIZ – Same wiring including buzzer type
· QTG L
Lens diameter 60(60mm) : QTG60(M)L 70(70mm) : QTG70(M)L
· QTG(A) (M)L-WIZ – Same wiring including buzzer type
· QTG L
Lens diameter 60(60mm) : QTG60(M)L 70(70mm) : QTG70(M)L
· DC steady type cable specification : External power/ signal line – UL1007
AWG22(0.3sq) 400mm. · AC steady, AC/DC steady/flashing type cable
specification : External power line – UL1015 AWG18(0.75sq) × 2C 400mm,
External signal line – UL1007 AWG22(0.3sq) 400mm
10
Wiring Instructions
· Wiring to transistor, use the NPN transistor. Please wire properly based on wiring instructions below.
AC/DC Steady
Wiring using transistor
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
DC Steady/ Flashing
Red Amber Green Blue White Brown
External Transistor-NPN
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Buzzer
Black White Black
Fuse
Common Power
· QTG(A) (M)L-WIZ – Same wiring including buzzer type
· QTG L
Lens diameter 60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
AC Steady/ Flashing
QTG60ML-WIZ QTG60L-WIZ QTG70ML-WIZ QTG70L-WIZ
Red Amber Green Blue White Brown Violet
Black White Black
External Transistor-NPN
Common Common
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Buzzer
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5
Fuse
Power
QTG60MLWIZ QTG60L-WIZ QTG70MLWIZ QTG70L-WIZ
Red Amber Green Blue White Brown Violet
Black White Black
External Transistor-NPN
Common Common
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Buzzer
Layer 1 Layer 2 Layer 3 Layer 4 Layer 5
Fuse
Power
· QTG(A) (M)L-WIZ – Same wiring including buzzer type
· QTG L
Lens diameter 60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
· QTG(A) (M)L-WIZ – Same wiring including buzzer type
· QTG L
Lens diameter 60(60mm) : QTG60(M)L
70(70mm) : QTG70(M)L
· DC steady type cable specification : External power/ signal line – UL1007
AWG22(0.3sq) 400mm. · AC steady, AC/DC steady/flashing type cable
specification : External power line – UL1015 AWG18(0.75sq) × 2C 400mm,
External signal line – UL1007 AWG22(0.3sq) 400mm
11
Parts Definition
Cover(ABS) Lens(PC)
Housing(ABS) Sound volume lever
Pipe(Al)
How to Change Lens Kit
· Disassembling lens kits Twist the upper lens kit in a
counter-wise direction so the “I” mark from both kits align. Disassemble by
removing the upper lens kit from the lower one.
Cautions
Contact Point
Lens modules are connected through cone-shaped contact point. In case the contact point is damaged, it may cause a contact failure.
· Assembling lens kits Put the two lens kits together
by aligning the upper lens’ “I” mark and the lower lens’ “I” mark together.
Lock the two kits by twisting the upper lens kit in a counter-wise direction
so the upper lens’ “” mark aligns with the lower lens’ “I” mark.
Installation Environment and Protection Rating
· This product is designed for indoor use with protection rating of
IP65(standard type) and IP54(buzzer type). · If the product is installed in
locations that subject it to excessive dust or water other than the designated
IP protection rating
indicated(IP65), it may cause malfunction or damage to the product. · For
further information, please visit our website(www.qlight.com).
12
Buzzer Sound Volume Adjustment Instructions
Buzzer volume is reduced by sliding the volume control lever to the left as
show in the diagram to the left. ( Min. 65±4dB/m )
Raise/ Increase the buzzer volume by sliding the control lever to the right as
shown in the diagram to the left.
( Max. 85±4dB/m )
Mounting Hole Specifications
QTG60ML-WIZ / QTG70ML-WIZ – Direct Mounting Type Model Machine holes on the mounting surface referring to the diagram below.
3-Ø5 HOLES Min.Ø5 CABLE ENTRY
3-Ø5 HOLES Min.Ø5 CABLE ENTRY
PCD 40
QTG60ML-WIZ
PCD 50
QTG70ML-WIZ
Remove the flange nuts from bolts and place the product through the mounting surface holes. Fasten the flange nuts on the opposite side of the mounting surface until the product is tightened securely.
Mounting Accessories (Sold Separately)
· Please refer to the dimensions below for installation of mounting brackets.
QTG60ML-WIZ/ QTG70ML-WIZ – Direct Mounting Type Model
Dimensions
QTG60 series
TWS45
TWA45
QTG70 series
TWS80
13
TWA80
34 24
75
50
QTG60L-WIZ – Pole Mounting Type Model QTG60 series
Ø18
Dimensions
69 52
Ø18
M18x1.5 THREAD
18mm SCREW & NUT
Ø18 Ø28
4-Ø5 HOLES
34 46
58
1/2″ PF
38 50 52 66
12×22 CABLE ENTRY
LW18
51
Ø18 4-Ø5.5 HOLES
PCD 54~56
Ø70
QZ18 Ø18
2-Ø8.5 HOLES
32
LB18
Ø18 4-Ø5 HOLES
PCD 56
Ø70
SZ18 Ø18
Ø11 CABLE ENTRY 4-Ø6 HOLES
PCD 73
Ø90 SL18
Ø18
67
Ø18 CABLE ENTRY 4-Ø5.5 HOLES
PCD 54~56
Ø70 QL18
51.5
Ø19 CABLE ENTRY 4-Ø5.5 HOLES
PCD 73
Ø90 QLA18
66
45.5
57
60
14
34 32
81
55.5
QTG70L-WIZ – Pole Mounting Type Model QTG70 series
Ø24
Dimensions
70 46
Ø24
M24x1.5 THREAD
24mm SCREW & NUT
33 34 46
70
Ø24 Ø35 12×22 CABLE ENTRY
4-Ø5 HOLES
1/2″ PF
38 50 52 69.5
LW24
55
Ø24 4-Ø5.5 HOLES
PCD 54~56
Ø70
QZ24 Ø24
2-Ø8.5 HOLES 46
LB24
Ø24 4-Ø5 HOLES
PCD 73
Ø90
SZ24 Ø24
Ø11 CABLE ENTRY 4-Ø6 HOLES
PCD 73
Ø90 SL24
Ø24
67
Ø18 CABLE ENTRY 4-Ø5.5 HOLES
PCD 71~73
Ø90 QL24
51.5
Ø19 CABLE ENTRY 4-Ø5.5 HOLES
PCD 73 Ø90
QLA24
66
45.5
57
60
15
For your safety
Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement. The newest product information is available on our website.(www.qlight.com) Please read the instruction manual attached to the product carefully before installation and use.
a. Rule Part 15.19(a)(3): This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
b. Rule Part 15.21: The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
Qlight Co., Ltd. www.qlight.com | trade@qlight.com Head Office | Suite #1510,
STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154 Factory
| 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel.
+82-55-328-1111(Toll free. +82-80-328-1111) Qlight Overseas Sales Dept | 704
Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team Office | 704 Nakdong-daero, Sasang-
gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017
Qlight USA, Inc. www.qlight.com www.qlightusa.com | sales@qlightusa.com 3003
North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 – 408 – 519 –
5740 Fax. +1 – 408 – 519 – 5739
SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com |
qlightcn@qlight.com China Factory/ Shanghai Sales Office | #19, Nanda Road,
Baoshan Area, Shanghai, China Tel. +86-21-6651-7100 Fax. +86-21-6315-3929
Product Operation Inquiry / Customer Support +82-51-620-4100 You can expect
prompt service if you have exact information such as model name, symptom,
telephone number and address. ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE
SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Head office : Suite #1510, STX-V
Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code :
08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do,
Korea (Postal Code : 50805) www.qlight.com EN – QTG60L-WIZ -2004A