QLIGHT SHDN30 Dual Facing Electric Horns User Manual

June 10, 2024
QLIGHT

SHDN30 Dual Facing Electric Horns

SHDN30 Dual Facing Electric Horns

Product Information

  • Model number: SHDN30
  • Voltage: DC24V
  • Current: 2.044A
  • Sound pattern and volume: Max. 118dBx2
  • Certificate weight: 3.49kg
  • Sound settings: Ch1-Ch5
  • Sound types: WS 5 Warning sounds, WP 5 Special Warning sounds, WM 5 Melodies, WA 5 Alarms, WV 5 Customizable sounds
  • Dimensions: 137mm x 125mm x 127mm

Product Usage

  1. Read the user manual carefully prior to installation and operation to ensure safe and correct use.
  2. Ensure that the power of the product is completely turned off during wiring or maintenance to avoid electric shock.
  3. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection.
  4. Select the sound type and volume using the sound setting switch inside of the unit.
  5. Adjust the volume using the volume dial.
  6. When wiring, follow the instructions provided for your specific type (LC or WP).
  7. Install the product in the desired location ensuring that it is protected from any potential damage.
  8. Adjust the angle of the horn housing as needed for optimal sound direction.
  9. The product is subject to change without notice for product quality improvement. For any updates or changes, please visit our website at www.qlight.com.

For your safety:

  • Failure to follow the instructions provided may cause a loss of life or serious physical injury.
  • Failure to follow the proper instructions may cause damage to property, malfunction of the product, or void the warranty.

Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

  1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
  2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, malfunction or damage to the product.)
  3.  Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
  4.  Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
  5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.

  1. Please remove any objects that can interrupt ventilation around the product.
  2. Please turn off the power of the product immediately if it fails to operate properly.
  3. Carefully wire the product according to each product’s specification.
  4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
  5. Do not apply excessive force/impact to the product.
  6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.

Ordering Specifications

SHDN30 Dual Facing Electric Horns 1

Product Specifications

  • Protection rating : IP56
  • Ambient operating temperature : -30°C to +50°C

Please scan the QR code for more detailed product information.

SHDN30 Dual Facing Electric Horns 10

Dimensions

SHDN30 Dual Facing Electric Horns 3

Sound Setting – Select using the switch inside of the unit.

SHDN30 Dual Facing Electric Horns 4

Sound Type by Group

Category| Sound pat- tern| Channel| Sound tone| volume

(Max.)

---|---|---|---|---

WS

|

5 Warning sounds

| Ch1| Fire.A-ANG|

118dB

Ch2| Emergency WA-U
Ch3| Ambulance PI-PO
Ch4| Machinery Fault
Ch5| High Expansion

WP

|

5 Special Warning sounds

| Ch1| Fire.A-ANG|

118dB

Ch2| Abandon Alarm
Ch3| Machinery Fault
Ch4| High Expansion
Ch5| 7 Short PI. / 1 Long

WM

|

5 Melodies

| Ch1| Sweet Home|

118dB

Ch2| For Elise
Ch3| Cuckoo’s Waltz
Ch4| Piano Sonata
Ch5| Turkish March

WA

|

5 Alarms

| Ch1| Beep Intermittent|

116dB

Ch2| Door Chime
Ch3| Phone Ring
Ch4| PI.PI.PI Short
Ch5| Tripping Beat

WV

|

5 Customiz- able sounds

|

Ch1-Ch5

| Available upon request (customized voice type)|

113dB

Wiring Instructions for LC Type

LC type product with exposed sound selection signal line is avaliable upon request. Please refer to the diagram below for wiring.

SHDN30-DC/AC

SHDN30 Dual Facing Electric Horns 5

  • External power line: UL1015 AWG18(0.75sq) x 2C 400mm
  • External signal line: UL1007 AWG22(0.3sq) 400mm
  • This product can be wired regardless of polarity..

Volume Adjustment

SHDN30 Dual Facing Electric Horns 6

  • The volume output of this product is adjustable.
  • Turn the volume dial clockwise to increase the volume, and turn counter clockwise to decrease the volume.
  • There will be no sound when the dial is put at MIN.

Parts Definition/ Installation

Mounting Hole Specifications

  • Machine holes on the mounting surface referring to the diagram below.

  • First, machine holes on the mounting surface.

  • The mounting hole of this product is 8.5mm in diameter.

  • When machining taps, fasten the bolt through the mounting hole of the bracket.

  • When machining holes, insert the bolt through the hole of the product,and tighten the nut from the opposite side of the mounting surface.

  • When assembling using bolt and nut, please make sure to use flat washer and spring washer.

Precautions for installation

In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-down positions where water can potentially penetrate into the product and impact it’s operation.

SHDN30 Dual Facing Electric Horns 9

Installation Environment and Protection Rating

  • This product is designed for use with protection rating of IP56.
  • If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated(IP56), it may cause malfunction or damage to the product.
  • For further information, please visit our website (www.qlight.com).

For your safety

Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement. The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.

Qlight Co., Ltd. www.qlight.com | trade@qlight.com
Head Office | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154 Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111) Qlight OverSEAs Sales Dept | 704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100 Qlight Public Relations & Marketing Team Office | 704 Nakdong-daero, Sasang- gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017 Qlight USA, Inc. www.qlight.com www.qlightusa.com | sales@qlightusa.com
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 – 408 – 519 – 5740 Fax. +1 – 408 – 519 – 5739

SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | qlightcn@qlight.com
China Factory/ Shanghai Sales Office | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86 – 21 – 6651 – 7100 Fax. +86 – 21 – 6315 – 3929 China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals