QLIGHT ST8 LED Steady Flashing Tower Lights User Manual

June 10, 2024
QLIGHT

QLIGHT ST8 LED Steady Flashing Tower Lights User Manual
QLIGHT ST8 LED Steady Flashing Tower Lights

Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

  1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
  2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, malfunction or damage to the product.)
  3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
  4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
  5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)

Precautions for Correct Use

Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.

  1. Please remove any objects that can interrupt ventilation around the product.
  2. Please turn off the power of the product immediately if it fails to operate properly.
  3. Carefully wire the product according to each product’s specification.
  4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
  5. Do not apply excessive force/impact to the product.
  6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.

Ordering Specifications

Ordering Instructions
Ordering Instructions
Ordering Instructions
Ordering Instructions

Product Specifications

ST45ML

Model number| Layer count| Voltage| Current| Certificate| Weight|

Color

---|---|---|---|---|---|---
 |  | AC/DC12V| 0.040A| | 0.19kg|
 | 1| AC/DC24V

AC110V

| 0.040A

0.024A

| 0.19kg 0.25kg| R-Red
 |  | AC220V| 0.012A| 0.25kg|
 |  | AC/DC12V| 0.080A| 0.21kg|

  • ST45ML
  • ST45ML-BZ| 2| AC/DC24V

AC110V

| 0.080A

0.026A

| 0.21kg 0.29kg| R-Red

G-Green

ST45ML-WS|  | AC220V| 0.013A| 0.29kg|
ST45ML-WM ST45ML-WA  ST45MLF
ST45MLF-BZ| ****

3

| AC/DC12V AC/DC24V AC110V AC220V| 0.120A

0.120A

0.028A

0.014A

| 0.25kg 0.25kg 0.34kg 0.34kg| R-Red

A-Amber G-Green

ST45MLF-WS ST45MLF-WM

ST45MLF-WA

| 4| AC/DC12V AC/DC24V AC110V| 0.160A
0.160A
0.031A| 0.30kg 0.30kg 0.38kg| R-Red

A-Amber G-Green

 |  | AC220V| 0.015A| 0.38kg| B-Blue
 | 5| AC/DC12V AC/DC24V AC110V AC220V| 0.200A
0.200A
0.033A
0.016A| 0.34kg 0.34kg 0.42kg
0.42kg| R-Red
A
Amber G-Green B-Blue W-White

ST45L

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.040A| | 0.35kg|
| 1| AC/DC24VAC110V| 0.040A0.024A| 0.35kg 0.45kg| R-Red
| | AC220V| 0.012A| 0.45kg|
| | AC/DC12V| 0.080A| 0.39kg|

  • ST45L ST45L-BZ| 2| AC/DC24VAC110V| 0.080A0.026A| 0.39kg 0.49kg| R-RedG-Green
    ST45L-WS| | AC220V| 0.013A| 0.49kg|
    ST45L-WM ST45L-WA
    ST45LF* ST45LF-BZ| 3| AC/DC12V AC/DC24V AC110V AC220V| 0.120A0.120A0.028A0.014A| 0.44kg 0.44kg 0.54kg 0.54kg| R-RedA-Amber G-Green
    ST45LF-WS ST45LF-WMST45LF-WA|
    4| AC/DC12V AC/DC24V AC110V| 0.160A0.160A0.031A| 0.48kg 0.48kg 0.58kg| R-RedA-Amber G-Green
    | | AC220V| 0.015A| 0.58kg| B-Blue
    | **** 5| AC/DC12V AC/DC24V AC110V AC220V| 0.200A0.200A0.033A0.016A| 0.52kg 0.52kg 0.62kg 0.62kg| R-RedA-Amber G-Green B-Blue W-White

ST56MEL

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.060A| ****| 0.26kg|
| 1| AC/DC24VAC110V| 0.040A0.044A| 0.26kg 0.42kg| R-Red
| | AC220V| 0.022A| 0.42kg|
| | AC/DC12V| 0.120A| 0.32kg|

  • ST56MEL ST56MEL-BZ| 2| AC/DC24VAC110V| 0.080A0.048A| 0.32kg 0.48kg| R-RedG-Green
    ST56MEL-WS| | AC220V| 0.024A| 0.48kg|
    ST56MEL-WM ST56MEL-WA
    ST56MELF* ST56MELF-BZ| 3| AC/DC12V AC/DC24V AC110V AC220V| 0.180A0.120A0.053A0.026A| 0.37kg 0.37kg 0.54kg 0.54kg| R-RedA- Amber G-Green
    ST56MELF-WS ST56MELF-WMST56MELF-WA|
    4| AC/DC12V AC/DC24V AC110V| 0.240A0.160A0.057A| 0.43kg 0.43kg 0.59kg| R-RedA-Amber G-Green
    | | AC220V| 0.028A| 0.59kg| B-Blue
    | **** 5| AC/DC12V AC/DC24V AC110V AC220V| 0.300A0.200A0.062A0.031A| 0.49kg 0.49kg 0.65kg 0.65kg| R-RedA-Amber G-Green B-Blue W-White

ST56EL

Model number

| Layer count| Voltage| Current| Certificate| Weight|

Color

---|---|---|---|---|---|---
 |  | AC/DC12V| 0.060A| ****| 0.41kg|
 | 1| AC/DC24V

AC110V

| 0.040A

0.044A

| 0.41kg 0.57kg| R-Red
 |  | AC220V| 0.022A| 0.57kg|
 |  | AC/DC12V| 0.120A| 0.47kg|
*  ST56EL

*  ST56EL-BZ

| 2| AC/DC24V

AC110V

| 0.080A

0.048A

| 0.47kg 0.62kg| R-Red

G-Green

ST56EL-WS|  | AC220V| 0.024A| 0.62kg|
ST56EL-WM ST56EL-WA

*  ST56ELF

*  ST56ELF-BZ

| ****

3

| AC/DC12V AC/DC24V AC110V AC220V| 0.180A

0.120A

0.053A

0.026A

| 0.52kg 0.52kg 0.68kg 0.68kg| R-Red

A-Amber G-Green

ST56ELF-WS ST56ELF-WM

ST56ELF-WA

| ****

4

| AC/DC12V AC/DC24V AC110V| 0.240A

0.160A

0.057A

| 0.58kg 0.58kg 0.74kg| R-Red
A-Amber G-Green
 |  | AC220V| 0.028A| 0.74kg| B-Blue
 | ****


5

| AC/DC12V AC/DC24V AC110V AC220V| 0.300A

0.200A

0.062A

0.031A

| 0.63kg 0.63kg 0.75kg 0.75kg| R-Red

A-Amber G-Green B-Blue W-White

ST56ML

Model number

| Layer count| Voltage| Current| Certificate| Weight|

Color

---|---|---|---|---|---|---
 |  | AC/DC12V| 0.120A| ****| 0.22kg|
 | 1| AC/DC24V

AC110V

| 0.080A

0.048A

| 0.22kg 0.45kg| R-Red
 |  | AC220V| 0.024A| 0.45kg|
 |  | AC/DC12V| 0.240A| 0.30kg|
*  ST56ML

*  ST56ML-BZ

| 2| AC/DC24V

AC110V

| 0.160A

0.057A

| 0.30kg 0.53kg| R-Red

G-Green

ST56ML-WS|  | AC220V| 0.028A| 0.53kg|
ST56ML-WM ST56ML-WA
ST56MLF
ST56MLF-BZ| ****

3

| AC/DC12V AC/DC24V AC110V AC220V| 0.360A

0.240A

0.066A

0.033A

| 0.38kg 0.38kg 0.61kg 0.61kg| R-Red

A-Amber G-Green

ST56MLF-WS

ST56MLF-WM ST56MLF-WA

| ****

4

| AC/DC12V AC/DC24V AC110V| 0.480A

0.320A

0.075A

| 0.46kg 0.46kg 0.70kg| R-Red

A-Amber G-Green

 |  | AC220V| 0.037A| 0.70kg| B-Blue
 | 5| AC/DC12V AC/DC24V AC110V AC220V| 0.600A
0.400A
0.082A
0.041A| 0.54kg 0.54kg 0.78kg 0.78kg| R-Red
A-Amber G-Green B-Blue W-White

ST56L

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.120A| | |
| | | 0.080A0.048A| 0.44kg 0.60kg| R-Red
| | AC220V| 0.024A| 0.60kg|
| | AC/DC12V| 0.240A| 0.52kg|
  ST56L ST56L-BZ ST56L-WS ST56L-WM ST56L-WA  ST56LF ST56LF-BZ ST56LF-WS ST56LF-WM ST56LF-WA| 2| AC/DC24VAC110V AC220V| 0.160A0.057A0.028A| 0.52kg 0.68kg 0.68kg| R-Red G-Green
3| AC/DC12V AC/DC24V AC110V AC220V| 0.360A0.240A0.066A0.033A| 0.60kg 0.60kg 0.76kg 0.76kg| R-RedA-Amber G-Green
4| AC/DC12V AC/DC24V AC110V AC220V| 0.480A0.320A0.075A0.037A| 0.68kg 0.68kg 0.84kg 0.84kg| R-RedA-Amber G-Green B-Blue
| ****
5| AC/DC12V AC/DC24V AC110V AC220V| 0.600A0.400A0.082A0.041A| 0.77kg 0.77kg 0.93kg 0.93kg| R-RedA-Amber G-Green B-Blue W-White

  • Models with an asterisk mark (*) have certification.
  • CE compliant : DC12V/24V
  • UL listed : DC24V

ST80MEL

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.080A| ****| 0.36kg|
| 1| AC/DC24VAC110V| 0.040A0.046A| 0.36kg 0.59kg| R-Red
| | AC220V| 0.023A| 0.59kg|
| | AC/DC12V| 0.160A| 0.45kg|

  • ST80MEL* ST80MEL-BZ| 2| AC/DC24VAC110V| 0.080A0.051A| 0.45kg 0.68kg| R-RedG-Green
    ST80MEL-WS| | AC220V| 0.025A| 0.68kg|
    ST80MEL-WM ST80MEL-WA ST80MELFST80MELF-BZ| 3| AC/DC12V AC/DC24V AC110V AC220V| 0.240A0.120A0.057A0.028A| 0.55kg 0.55kg 0.76kg 0.76kg| R-RedA-Amber G-Green
    ST80MELF-WS| | AC/DC12V| 0.320A| 0.64kg| R-Red
    ST80MELF-WMST80MELF-WA| 4| AC/DC24VAC110V| 0.160A0.064A| 0.64kg 0.87kg| A-Amber G-Green
    | | AC220V| 0.032A| 0.87kg| B-Blue
    | ****
    5| AC/DC12V AC/DC24V AC110V AC220V| 0.400A0
    .200A0.
    071A0.035A| 0.73kg 0.73kg 0.96kg 0.96kg| R-RedA-Amber G-Green B-Blue W-White

ST80EL

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.080A| | 0.58kg|
| 1| AC/DC24VAC110V| 0.040A0.046A| 0.58kg 0.81kg| R-Red
| | AC220V| 0.023A| 0.81kg|
| | AC/DC12V| 0.160A| 0.67kg|
  ST80EL ST80EL-BZ ST80EL-WS ST80EL-WM ST80EL-WA ST80ELF ST80ELF-BZ ST80ELF-WS ST80ELF-WM ST80ELF-WA| 2| AC/DC24VAC110V AC220V| 0.080A0.051A0.025A| 0.67kg 0.91kg 0.91kg| R-Red G-Green
3| AC/DC12V AC/DC24V AC110V AC220V| 0.240A0.120A0.057A0.028A| 0.77kg 0.77kg 1.00kg 1.00kg| R-RedA-Amber G-Green
4| AC/DC12V AC/DC24V AC110V AC220V| 0.320A0.160A0.064A0.032A| 0.86kg 0.86kg 1.09kg 1.09kg| R-RedA-Amber G-Green B-Blue
| ****
5| AC/DC12V AC/DC24V AC110V AC220V| 0.400A0.200A0.071A0.035A| 0.95kg 0.95kg 1.19kg 1.19kg| R-RedA-Amber G-Green B-Blue W-White

ST80ML

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.160A| ****| 0.40kg|
| 1| AC/DC24VAC110V| 0.080A0.055A| 0.40kg 0.64kg| R-Red
| | AC220V| 0.027A| 0.64kg|
| | AC/DC12V| 0.320A| 0.54kg|

  • ST80ML* ST80ML-BZ| 2| AC/DC24VAC110V| 0.160A0.064A| 0.54kg 0.78kg| R-RedG-Green
    ST80ML-WS| | AC220V| 0.032A| 0.78kg|
    ST80ML-WM ST80ML-WA ST80MLFST80MLF-BZ| 3| AC/DC12V AC/DC24V AC110V AC220V| 0.480A0.240A0.073A0.036A| 0.68kg 0.68kg 0.92kg 0.92kg| R-RedA-Amber G-Green
    ST80MLF-WS| | AC/DC12V| 0.640A| 0.83kg| R-Red
    ST80MLF-WMST80MLF-WA| 4| AC/DC24VAC110V| 0.320A0.084A| 0.83kg 1.06kg| A-Amber G-Green
    | | AC220V| 0.042A| 1.06kg| B-Blue
    | ****
    5| AC/DC12V AC/DC24V AC110V AC220V| 0.800A0
    400A0
    093A0
    .046A| 0.97kg 0.97kg 1.20kg 1.20kg| R-RedA-Amber G-Green B-Blue W-White

ST80L

Model number| Layer count| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
| | AC/DC12V| 0.160A| | 0.62kg|
| 1| AC/DC24VAC110V| 0.080A0.055A| 0.62kg 0.86kg| R-Red
| | AC220V| 0.027A| 0.86kg|
| | AC/DC12V| 0.320A| 0.77kg|
  ST80L ST80L-BZ ST80L-WS ST80L-WM ST80L-WA ST80LF ST80LF-BZ ST80LF-WS ST80LF-WM ST80LF-WA| 2| AC/DC24VAC110V AC220V| 0.160A0.064A0.032A| 0.77kg 1.00kg 1.00kg| R-Red G-Green
3| AC/DC12V AC/DC24V AC110V AC220V| 0.480A0.240A0.073A0.036A| 0.91kg 0.91kg 1.14kg 1.14kg| R-RedA-Amber G-Green
4| AC/DC12V AC/DC24V AC110V AC220V| 0.640A0.320A0.084A0.042A| 1.05kg 1.05kg 1.29kg 1.29kg| R-RedA-Amber G-Green B-Blue
| ****
5| AC/DC12V AC/DC24V AC110V AC220V| 0.800A0.400A0.093A0.046A| 1.19kg 1.19kg 1.14kg 1.14kg| R-RedA-Amber G-Green B-Blue W-White

  • Models with an asterisk mark (*) have certification.
  • CE compliant : DC12V/24V
  • UL listed : DC24V

Signal/ Audible line current(Per each layer)

Model number Current AC/DC12V AC/DC24V AC110V AC220V
ST45ML ST45L Signal line current 0.040A 0.040A 0.024A 0.012A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST56MEL ST56EL Signal line current 0.060A 0.040A 0.044A 0.022A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST56ML ST56L Signal line current 0.120A 0.080A 0.048A 0.024A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST80MEL ST80EL Signal line current 0.080A 0.040A 0.046A 0.023A
Audible line current 0.016A 0.031A 0.027A 0.030A
ST80ML ST80L Signal line current 0.160A 0.080A 0.055A 0.027A
Audible line current 0.016A 0.031A 0.027A 0.030A

Dimensions

ST45ML/ ST45L
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions
Dimensions

Wiring Instructions

Wiring using external contact

In case of wiring with external contacts, refer to the wiring diagrams below according to your product’s type and voltage setting.

| Wiring diagrams|  |

Wiring diagrams

---|---|---|---
DC Steady| | AC Steady|
ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L| ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L
DC Steady/Flashing| | AC Steady/Flashing|
ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF| ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF
DC/AC Steady Built-in Signal Sound|
ST□□M(E)L – WS/ WM/ WA type same wiring instruction
ST□□(E)L – WS/ WM/ WA type same wiring instruction
ST□ L
Lens diameter 45(45mm) : ST45L
56(56mm) : ST56L
80(80mm) : ST80L| DC/AC Steady/Flashing Built-in Signal Sound|
ST□□M(E)LF – WS/ WM/ WA type same wiring instruction
ST□□(E)LF – WS/ WM/ WA type same wiring instruction
ST□□ __ LF
Lens diameter 45(45mm) : ST45LF
56(56mm) : ST56LF
80(80mm) : ST80LF

  • DC steady type cable specification : External power/ signal line – UL1007 AWG22(0.3sq) 400mm.
  • AC steady, AC/DC steady/flashing type cable specification : External power line – UL1015 AWG18(0.75sq) × 2C 400mm, External signal line – UL1007 AWG22(0.3sq) 400mm

Wiring using transistor

When using a transistor, please choose between the NPN or PNP type transistor which best matches the voltage and product type, then connect them correctly according to the wiring diagrams below.

 |

Wiring diagrams

---|---
DC Steady| Wiring diagrams
ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L
DC Steady/Flashing| Wiring diagrams| AC Steady/Flashing| Wiring
diagrams
ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF| ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF
DC/AC Steady Built-in Signal Sound|

  • ST□□M(E)L – WS/ WM/ WA type same wiring instruction
  • ST□□(E)L – WS/ WM/ WA type same wiring instruction
  • ST□ L
    Lens diameter 45(45mm) : ST45L
    56(56mm) : ST56L
    80(80mm) : ST80L

| DC/AC Steady/Flashing Built-in Signal Sound| Wiring
diagrams

  • ST□□M(E)LF – WS/ WM/ WA type same wiring instruction
  • ST□□(E)LF – WS/ WM/ WA type same wiring instruction
  • ST□ LF
    Lens diameter 45(45mm) : ST45LF
    56(56mm) : ST56LF
    80(80mm) : ST80LF

ST45ML ST45L ST56MEL ST56ML ST56EL ST56L ST80MEL ST80ML ST80EL ST80L| ST45MLF ST45LF ST56MELF ST56MLF ST56ELF ST56LF ST80MELF ST80MLF ST80ELF ST80LF

  • DC steady type cable specification : External power/ signal line – UL1007 AWG22(0.3sq) 400mm.
  • AC steady, AC/DC steady/flashing type cable specification : External power line – UL1015 AWG18(0.75sq) × 2C 400mm, External signal line – UL1007 AWG22(0.3sq) 400mm

Parts Definition

Parts Definition

How to Change Lens Kit

Change Lens Kit

  • When rearranging or replacing the lens kits, please be aware of the contact point ① and the connector pin ② marked in the diagram on the left.
  • Press down to assemble the lens kits while making sure that connector pin ② and connector ③ aligns correctly.
  • Please make sure that the rubber spacer placed on the top of each ② lens kit is tightly secured to the bottom of the other lens kit.

Caution when dealing with lens kit

  • Lens kits are connected with connector pins each other. Bad connection may be experienced when the connector pins are touched with a foreign substance.
  • If the lens kits are not turned on or not flashed after lens kits replacement, please make sure status of lens kit connection.

Installation Environment and Protection Rating

  • This product is designed for indoor use with protection rating of IP44(standard type) or IP23(buzzer type).
  • If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated(IP44), it may cause malfunction or damage to the product.
  • For further information, please visit our website(www.qlight.com).

Mounting Hole Specifications

ST45ML/ ST56MEL/ ST56ML/ ST80MEL/ ST80ML- Direct Mounting Type Model

  1. Machine holes on the mounting surface referring to the diagram below.
    Mounting Hole

  2. First, remove the flange nuts from bolts and place the product through the mounting surface holes.

  3. Fasten the flange nuts on the opposite side of the mounting surface until the product is tightened securely

2 Sound Buzzer Type

  • Buzzer type model with 2 different sounds of long beeping sound and short beeping sound is available upon request.
  • Lens Kits supplied by AC Type power (same wiring as DC Steady type product)
  • Customized pole length(ST45L/ ST56EL/ ST56L/ ST80EL/ ST80L)
Mounting Accessories (Sold Separately)

Please refer to the dimensions below for installation of mounting brackets

ST45ML/ ST56MEL/ ST56ML/ ST80MEL/ ST80ML – Direct Mounting Type Model

  Dimensions
ST45 series ST56 series ![Dimensions](https://manuals.plus/wp-

content/uploads/2023/04/Screenshot_31-52.png)
TWS45| Dimensions
TWA45
ST80 series| Dimensions
TWS80|
TWA80

ST45L/ ST56EL/ ST56L – Pole Mounting Type Model

ST45 series ST56 series
Dimensions

ST80 series
Dimensions
Dimensions

Technical Certification

  • Qlight products are designed to meet strict quality and technical standards. Thus, the Qlight brand is widely recognized for its high quality and technical innovations from leading institutions around the world.


ISO International Organization for Standardization

Qlight quality assurance systems have been certified by ISO by applying the ISO 90001-2018 KS Q ISO 9001:2009 regulation.


ATEX The European Regulatory

Framework or Manufacture, Installation and Use of Equip- ment in Explosive Atmospheres Qlight’s explosion proof products comply with ATEX Directives 94/9/EC.


KCs
Explosion Proof Device Safety Certification System The  safety performance  of  machines  and Technical capability and production system have standards.


TIIS Japan Explosion-proof certification

TIIS is a Japanes explosion proof test and certification system accordance with the Ministry of Health, Labour and Welfare Notice and the explosion proof guidelines for factory electrical equipment. Qlight’s explosion proof products hasve been tested and certified by TIIS.

Symbols
Light’s design and quality assurance system has 2Ia been certified by the China Classification Society. CCS China Classification Society


LR Lloyd’s

Register light’s design and quality assurance system has been certified from Lloyd’s Register.


UL Underwriters Laboratories

Qlight’s design and quality assurance system has been certified from UL to ensure the stability of consumption goods and to protect consumers.


CCCF China certification Center for  Security & Protection
Qlight has passed the rigorous examination process of “Passing Fire Protection Products Centering” In order to sell fire-fighting products such as fire alarm equipment to Chinese market.


CCC China Compulsory Certificate
Qlight’s has obtained CCC which guarantees safety, protection against fraud, environment, etc.


RoHS2 Restriction of Hazardous Substances Directive

Qlight c omplies with the Restriction of Hazardous Substances Directive by limiting its use of hazardous materials.

For your safety

Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before installation and use.

Support

Qlight Co., Ltd. www.qlight.com
trade@qlight.com
Head Office
Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory
185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team Office
704 Nakdong-daero, Sasang-gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals