QLIGHT ST45 Bulb Steady Flashing Tower Lights User Manual
- June 10, 2024
- QLIGHT
Table of Contents
- Precautions for Safety
- Precautions for Correct Use
- Ordering Specifications
- Product Specifications
- Dimensions
- Wiring Instructions
- Parts Definition
- Installation Environment and Protection Rating
- Mounting Hole Specifications
- Mounting Accessories (Sold Separately)
- Technical Certification
- Customer Service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
QLIGHT ST45 Bulb Steady Flashing Tower Lights
Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
- During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an eel ctric shock.)
- Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, malfunction or damage to the product.)
- Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
- Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
- When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Precautions for Correct Use Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.
- Please remove any objects that can interrupt ventilation around the product.
- Please turn off the power of the product immediately if it fails to operate properly.
- Carefully wire the product according to each product’s specification.
- Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
- Do not apply excessive force/impact to the product.
- Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock. Precautions for Correct Use Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.
Ordering Specifications
ST45/ 56/ 80B | 3 | 10/220 | RAG | LW18 |
---|---|---|---|---|
[Model number] | [Layer] | [Voltage] | [Color] | [Mounting option] |
1 | 1 | 1 | 1 | 1 |
- ST45/ 56/ 80B
- ST45/ 56/ 80B-BZ
- ST45/ 56/ 80BF
- ST45/ 56/ 80BF-BZ
|
- Layer1-1
- Layer2-2
- Layer3-3
- Layer4-4
- Layer5-5
|
- 12-DC12V
- 24-DC24
- 110-AC110V
- 220-AC220V
| R-Red
A-Amber
G-Green
B-Blue
W-White
|
- (Blank)
-Standard type - Mounting type
- LB18/24 –
- LW18/24
- QZ18/24 –
- SZ18/24
- QL18/24 –
- SL18/2
- QLA18/24
ST45/ 56/ 80MB| 3| 110/220| RAG|
[Model number]| [Layer]| [Voltage]| [Color]
1| 1| 1| 1
- ST45/ 56/ 80MB-BZ
- ST45/ 56/ 80MBF
- ST45/ 56/ 80MBF-BZ
|
- Layer1-1
- Layer2-2
- Layer3-3
- Layer4-
- Layer5-5
|
- 12-DC12V
- 24-DC24V
- 110-AC110V
- 220-AC220V
| R-Red
A-Amber
G-Green
B-Blue
W-White
Please scan the QR code for more detailed product information.
www.qlight.com
Product Specifications
ST45B
Model number| Layer| Voltage| Current| Bulb|
Certificate| Weight| Weight|
---|---|---|---|---|---|---|---|---
Spec| Standard| Parts no#
| | AC/DC12V| 0.398A| 12V5W| G14 9S| 1| | | |
| 1| AC/DC24V
AC110V
| 0.212A
0.048A
| 24V5W
110V5W
| G14 9S
T16x28 9S
| 2
3
| 0.36kg| R-Red|
| | AC220V| 0.023A| 220V5W| T16x28 9S| 4| | |
| | AC/DC12V| 0.797A| 12V5W| G14 9S| 1| | |
ST45B
Steady
| 2| AC/DC24V
AC110V AC220V
| 0.424A
0.097A
0.046A
| 24V5W
110V5W
220V5W
| G14 9S T16x28 9S
T16x28 9S
| 2
3
4
| 0.41kg| R-Red G-Green|
ST45B-BZ
Steady /w built-in buzzer
ST45BF
Steady/Flashing ST45BF-BZ
Steady/Flashing /w
built-in buzzer
3| AC/DC12V AC/DC24V AC110V AC220V| 1.196A
0.636A
0.146A
0.070A
| 12V5W
24V5W
110V5W
220V5W
| G14 9S G14 9S T16x28 9S T16x28 9S| 1
2
3
4
| 0.46kg| R-Red
A-Amber G-Green|
4| AC/DC12V AC/DC24V AC110V AC220V| 1.595A
0.848A
0.195A
0.093A
| 12V5W
24V5W
110V5W
220V5W
| G14 9S G14 9S T16x28 9S T16x28 9S| 1
2
3
4
| 0.51kg| R-Red
A-Amber G-Green B-Blue
|
| 5| AC/DC12V AC/DC24V AC110V AC220V| 1.994A
1.061A
0.244A
0.116A
| 12V5W
24V5W
110V5W
220V5W
| G14 9S G14 9S T16x28 9S T16x28 9S| 1
2
3
4
| 0.56kg| R-Red
A-Amber G-Green B-Blue W-White|
※ CE compliant : DC12V/24V
• ST45MB
Model number| Layer| Voltage| Current| Bulb|
Certificate| Weight| Weight|
---|---|---|---|---|---|---|---|---
Spec| Standard| Parts no#
| | AC/DC12V| 0.398A| 12V5W| G14 9S| 1| | | |
| 1| AC/DC24V
AC110V
| 0.212A
0.048A
| 24V5W
110V5W
| G14 9S
T16x28 9S
| 2
3| 0.22kg| R-Red|
| | AC220V| 0.023A| 220V5W| T16x28 9S| 4| | |
| | AC/DC12V| 0.797A| 12V5W| G14 9S| 1| | |
ST45MB
Steady
| 2| AC/DC24V AC110V
AC220V
| 0.424A
0.097A
0.046A
| 24V5W
110V5W
220V5W
| G14 9S T16x28 9S
T16x28 9S
| 2
3
4| 0.26kg| R-Red G-Green|
ST45MB-BZ
Steady /w built-in buzzer
ST45MBF
Steady/Flashing ST45MBF-BZ
Steady/Flashing /w
built-in buzzer
3| AC/DC12V AC/DC24V AC110V AC220V| 1.196A
0.636A
0.146A
0.070A
| 12V5W
24V5W
110V5W
220V5W
| G14 9S G14 9S T16x28 9S T16x28 9S| 1
2
3
4| 0.31kg| R-Red
A-Amber G-Green
|
4| AC/DC12V AC/DC24V AC110V AC220V| 1.595A
0.848A
0.195A
0.093A
| 12V5W
24V5W
110V5W
220V5W
| G14 9S G14 9S T16x28 9S T16x28 9S| 1
2
3
4| 0.37kg| R-Red
A-Amber G-Green B-Blue
|
| 5| AC/DC12V AC/DC24V AC110V AC220V| 1.994A
1.061A
0.244A
0.116A
| 12V5W
24V5W
110V5W
220V5W
| G14 9S G14 9S T16x28 9S T16x28 9S| 1
2
3
4
| 0.42kg| R-Red
A-Amber G-Green B-Blue W-White
|
• Signal/ Audible Line Current(per each layer)
Voltage | AC/DC12V | AC/DC24V | AC110V | AC220V |
---|---|---|---|---|
Signal line current | 0.398A | 0.212A | 0.048A | 0.023A |
Audible line current | 0.016A | 0.031A | 0.090A | 0.090A |
• ST56B
| Model number| Layer| Voltage| Current| Bulb|
Certificate| Weight| Weight|
---|---|---|---|---|---|---|---|---|---
| Spec| Standard| Parts no#
| | | AC/DC12V| 0.925A| 12V10W| T16x35 15S| 9| | | |
| | 1| AC/DC24V
AC110V
| 0.514A
0.095A
| 24V10W
110V10W
| T16x35 15S
T16x35 15S
| 10
12
| 0.45kg| R-Red|
| | | AC220V| 0.046A| 220V10W| T16x35 15S| 13| | |
| | | AC/DC12V| 1.851A| 12V10W| T16x35 15S| 9| | |
| ST56B
Steady
| 2| AC/DC24V
AC110V AC220V
| 1.028A
0.191A
0.093A
| 24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S
T16x35 15S
| 10
12
13| 0.53kg| R-Red G-Green|
| ST56B-BZ
Steady /w built-in buzzer
ST56BF
Steady/Flashing ST56BF-BZ
Steady/Flashing /w
built-in buzzer
| ****
3
| AC/DC12V AC/DC24V AC110V AC220V| 2.776A
1.543A
0.286A
0.140A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13| ****
0.61kg
| R-Red
A-Amber G-Green
|
| ****
4
| AC/DC12V AC/DC24V AC110V AC220V| 3.702A
2.057A
0.382A
0.186A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| ****
0.69kg
| R-Red
A-Amber G-Green B-Blue
|
| | 5| AC/DC12V AC/DC24V AC110V AC220V| 4.627A
2.572A
0.477A
0.233A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| ****
0.77kg
| R-Red
A-Amber G-Green B-Blue W-White
|
Model number| Layer| Voltage| Current| Bulb| Certificate| Weight| Weight|
Spec| Standard| Parts no#
| | AC/DC12V| 0.925A| 12V10W| T16x35 15S| 9| | | |
| 1| AC/DC24V
AC110V
| 0.514A
0.095A
| 24V10W
110V10W
| T16x35 15S
T16x35 15S
| 10
12
| 0.30kg| R-Red|
| | AC220V| 0.046A| 220V10W| T16x35 15S| 13| | |
| | AC/DC12V| 1.851A| 12V10W| T16x35 15S| 9| | |
ST56MB
Steady
| 2| AC/DC24V AC110V
AC220V
| 1.028A
0.191A
0.093A
| 24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S
T16x35 15S
| 10
12
13
| 0.39kg| R-Red G-Green|
ST56MB-BZ
Steady /w built-in buzzer
ST56MBF
Steady/Flashing ST56MBF-BZ
Steady/Flashing /w
built-in buzzer
3| AC/DC12V AC/DC24V AC110V AC220V| 2.776A
1.543A
0.286A
0.140A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| 0.46kg| R-Red
A-Amber G-Green
|
4| AC/DC12V AC/DC24V AC110V AC220V| 3.702A
2.057A
0.382A
0.186A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| ****
0.54kg
| R-Red
A-Amber G-Green B-Blue
|
| 5| AC/DC12V AC/DC24V AC110V AC220V| 4.627A
2.572A
0.477A
0.233A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| ****
0.62kg
| R-Red
A-Amber G-Green B-Blue W-White
|
| | | | | | | | | | | | | | | | | | | |
• Signal/ Audible Line Current(per each layer)
Voltage | AC/DC12V | AC/DC24V | AC110V | AC220V |
---|---|---|---|---|
Signal line current | 0.925A | 0.514A | 0.095A | 0.046A |
Audible line current | 0.016A | 0.031A | 0.090A | 0.090A |
ST80B
Model number| Layer| Voltage| Current| Bulb| Certificate| Weight| Weight|
---|---|---|---|---|---|---|---|---
Spec| Standard| Parts no#
| | AC/DC12V| 0.925A| 12V10W| T16x35 15S| 9| | | |
| 1| AC/DC24V
AC110V
| 0.514A
0.095A
| 24V10W
110V10W
| T16x35 15S
T16x35 15S
| 10
12
| 0.61kg| R-Red|
| | AC220V| 0.046A| 220V10W| T16x35 15S| 13| | |
| | AC/DC12V| 1.851A| 12V10W| T16x35 15S| 9| | |
ST80B
Steady
| 2| AC/DC24V AC110V
AC220V
| 1.028A
0.191A
0.093A
| 24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S
T16x35 15S
| 10
12
13
| 0.75kg| R-Red G-Green|
ST80B-BZ
Steady /w built-in buzzer
ST80BF
Steady/Flashing ST80BF-BZ
Steady/Flashing /w
built-in buzzer
3| AC/DC12V AC/DC24V AC110V AC220V| 2.776A
1.543A
0.286A
0.140A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| 0.88kg| R-Red
A-Amber G-Green
|
4| AC/DC12V AC/DC24V AC110V AC220V| 3.702A
2.057A
0.382A
0.186A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| 1.04kg| R-Red
A-Amber G-Green B-Blue
|
| 5| AC/DC12V AC/DC24V AC110V AC220V| 4.627A
2.572A
0.477A
0.233A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| 1.18kg| R-Red
A-Amber G-Green B-Blue W-White
|
- ST80MB
Model number| Layer| Voltage| Current| Bulb|
Certificate| Weight| Weight|
---|---|---|---|---|---|---|---|---
Spec| Standard| Parts no#
| | AC/DC12V| 0.925A| 12V10W| T16x35 15S| 9| | | |
| 1| AC/DC24V
AC110V
| 0.514A
0.095A
| 24V10W
110V10W
| T16x35 15S
T16x35 15S
| 10
12
| 0.42kg| R-Red|
| | AC220V| 0.046A| 220V10W| T16x35 15S| 13| | |
| | AC/DC12V| 1.851A| 12V10W| T16x35 15S| 9| | |
ST80MB
Steady
| 2| AC/DC24V AC110V
AC220V
| 1.028A
0.191A
0.093A
| 24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S
T16x35 15S
| 10
12
13
| 0.56kg| R-Red G-Green|
ST80MB-BZ
Steady /w built-in buzzer
ST80MBF
Steady/Flashing ST80MBF-BZ
Steady/Flashing /w
built-in buzzer
3| AC/DC12V AC/DC24V AC110V AC220V| 2.776A
1.543A
0.286A
0.140A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| ****
0.68kg
| R-Red
A-Amber G-Green
|
4| AC/DC12V AC/DC24V AC110V AC220V| 3.702A
2.057A
0.382A
0.186A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| ****
0.84kg
| R-Red
A-Amber G-Green B-Blue
|
| 5| AC/DC12V AC/DC24V AC110V AC220V| 4.627A
2.572A
0.477A
0.233A
| 12V10W
24V10W
110V10W
220V10W
| T16x35 15S T16x35 15S T16x35 15S T16x35 15S| 9
10
12
13
| 0.98kg| R-Red
A-Amber G-Green B-Blue W-White
|
- Signal/ Audible Line Current(per each layer)
Voltage | AC/DC12V | AC/DC24V | AC110V | AC220V |
---|---|---|---|---|
Signal line current | 0.925A | 0.514A | 0.095A | 0.046A |
Audible line current | 0.016A | 0.031A | 0.090A | 0.090A |
Dimensions
ST45B
ST45B : AC/DC
ST45B-BZ : AC/DC
ST45BF : AC /DC
ST45BF-BZ : AC/DC
ST45MB
ST45MB : AC/DC
ST45MB-BZ : AC/DC
ST45MBF : AC/DC
ST45MBF-BZ : AC/DC
ST56B
ST56B : AC/DC
ST56B-BZ : AC/DC
ST56BF : AC/DC
ST56BF-BZ : AC/DC
ST56MB
ST56MB : AC/DC
ST56MB-BZ : AC/DC
ST56MBF : AC/DC
ST56MBF-BZ : AC/DC
ST80B
LAYER | L |
---|---|
1 | 317 |
2 | 387 |
3 | 457 |
4 | 527 |
5 | 597 |
ST80B-BZ : AC/DC
ST80BF-BZ : AC/DC
ST80MB
ST80MB : AC/DC
ST80MBF : AC/DC
ST80MB-BZ : AC/DC
ST80MBF-BZ : AC/DC
Wiring Instructions
- Please wire by following below instructions for ST45MB/ ST45B, ST56MB/ ST56B and ST80MB/ ST80B series.
- Bulb tower lights do not allow transistor wiring. Please use external contact.
| External contact| |
---|---|---|---
DC/AC
Steady| ST45MB/ ST45B-DC/AC
ST56MB/ ST56B-DC/AC
ST80MB/ ST80B-DC/ACEXTERNAL CONTACT| |
DC
Steady/
Flashing| ST45MBF/ ST45BF-DC/AC
ST56MBF/ ST56BF-DC/AC
ST80MBF/ ST80BF-DC/ACEXTERNAL CONTACT
| AC
Steady/
Flashing| ST45MBF/ ST45BF-DC/AC
ST56MBF/ ST56BF-DC/AC
ST80MBF/ ST80BF-DC/ACXTERNAL CONTACT
- External power line – UL1015 AWG18(0.75sq) x 2C 400mm
- External signal line – UL1007 AWG22(0.3sq) 400mm
Parts Definition
Installation Environment and Protection Rating
-
This product is designed for indoor use with protection rating of IP44(standard type) or IP23(buzzer type).
-
If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated, it may cause malfunction or damage to the product. -
For further information, please visit our website (www.qlight.com).
Mounting Hole Specifications
- ST45MB/ ST56MB/ ST80MB – Direct Mounting Type Model
-
Machine holes on the mounting surface referring to the diagram below.
-
Remove the flange nuts from bolts and place the product through the mounting surface holes.
-
Fasten the flange nuts on the opposite side of the mounting surface until the product is tightened securely.
Mounting Accessories (Sold Separately)
- Please refer to the dimensions below for installation of mounting brackets
- ST45MB/ ST56MB/ ST80MB – Direct Mounting Type Model
| Dimensions
---|---
ST45MB
ST56MB
| |
ST80MB| |
- ST45B/ ST56B – Pole Mounting Type Model
| Dimensions|
---|---|---
ST45B
ST56B| |
| |
| |
| |
- ST80B – Pole Mounting Type Model
| Dimensions|
---|---|---
ST80B| |
| |
| |
| |
Technical Certification
- Qlight products are designed to meet strict quality and technical standards. Thus, the Qlight brand is widely recognized for its high quality and technical innovations from leading institutions around the world.
|
Qlight quality assurance systems have been
certified by ISO by applying the ISO 9001 :2008, KS Q ISO 9001:2009
regulation.
---|---
| ATEX The European Regulatory
Framework or Manufacture, Installation and Use of Equipment in ExplosiveAtmospheres Qlight’s explosion proof products comply with ATEX Directives 94/9/EC.
| KCs Explosion Proof Device
Safety Certification System The safety performance of machines and equipment subject to safety certification and Technical capability and production system have been certified safety certification Standerds
| CSS China Classification Society
Qlight’s design and quality assurance system has been certified by the China
Classification Society.
| LR Lloyd’s Register
Qlight’s design and quality assurance system has been certified from Lloyd’s
Register.
| KC Korea Safety Certification
Qlight’s products are certified by KC for preventingaccident caused by fire.
| ICAO International Civil Aviation Organization
Qlight guarantees our products satisfy the criteria regulated by the International Civil Aviation Organization(ICAO, FAA).
| UL Underwriters Laboratories
Qlight’s design and quality assurance system has been certified from UL to
ensure the stability of consumption goods and to protect consumers.
| CSS China Compulsory Certificate
Qlight’s has obtained CCC which guarantees safety,
protection against fraud, environment, etc.
| RoHS2 Restriction of Hazardous Substances Directive
Qlight c omplies with the Restriction of Hazardous Substances Directive by
limiting its use of hazardous materials.
| IECEx International Explosion Proof Certification (IECEx)
Certified that Qlight’s products are being manufactured and manage according to international standards.
| NEPSI National Supervision and Inspection Center for Explosion Protection and Safety of Instrumentation
Qlight’s design and manufacturing system meets the People’s Republic of China National explosion proof Standard.
(Chinese Standard-GB3836/GB12476)
| TIIS Japan Explosion-proof Certification
TIIS is a Japanes explosion proof test and certification system accordance with the Ministry of Health, Labour and Welfare Notice and the explosion proof guidelines for factory electrical equipment. Qlight’s explosion proof products hasve been tested and certified by TIIS.
| RMRS Russian Maritime Register of Shipping
Qlight’s design and quality assurance system has been certified from Russian Maritime Register of Shipping.
| KR Korean Register of Shipping
Qlight’s design and quality assurance system has been certified by the Korean Register of Shipping.
| E-mark Commission Directive Regarding Vehicle Industry
Qlight has obtained EU mark for approved vehicles and vehicle components
sold into the EU(EEA : European Economic Area)
| KCC Conformity Assessment of Broadcasting Communication Equipment
Qlight has been certified to protect the electromagnetic environment that causes unwanted electromagnetic waves from the device, communication failure due to other devices or external radio waves, and malfunction of the device.
| CCCF China Certification Center for Security & Protection
Qlight has passed the rigorous examination process of “Passing Fire
Protection Products Centering” In order to sell fire-fighting products such as
fire alarm equipment to Chinese market.
| CE European Commission
Qlight has been certified by the European Commission.
For your safety
Specification and dimensions listed in this catalogue subject to change
without notice for product quality improvement.
The newest product information is available on our
website.(www.qlight.com)
Please read the instruction manual attached to the product carefully before
installation and use.
Customer Service
Qlight Co., Ltd. www.qlight.com |
trade@qlight.com
Head Office | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu,
Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo,
Korea
Tel. +82 – 55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept | 704 Nakdong-daero, Sasang-gu, Busan, Korea
(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team Office | 704 Nakdong-daero, Sasang-
gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017
Qlight USA, Inc. www.qlight.com
www.qlightusa.com |
sales@qlightusa.com
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 – 408 –
519 – 5740 Fax. +1 – 408 – 519 – 5739
SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com
www.qlightcn.com |
qlightcn@qlight.com
China Factory/ Shanghai Sales Office | #19, Nanda Road, Baoshan Area,
Shanghai, China Tel. +86 – 21 – 6651 – 7100 Fax. +86 – 21 – 6315 – 3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial
Development Zone, Qidong, Jiangsu Province, China
Tel +86- 513- 8384- 9999 Fax +86- 513- 8384- 9910
Product Operation Inquiry / Customer
Support +82-51-620-4100
You can expect prompt service if you have exact information such as model
name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT
NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Head office :
Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
(Postal Code : 0850
References
- Qlight - Warning Light, Beacon, Audible & Visual Signal, Tower Light
- 可莱特(Qlighte)_专注多层信号灯、声光报警器,防爆警示灯,机床照明灯等产品的生产和销售
- Signal Tower Lights, Warning Lights & Electric Horns, Fully Enclosed Products, Explosion proof Products, LED Work Lights-Qlight
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>