MugEasy C30-M Endoscope Camera User Guide
- June 16, 2024
- MugEasy
Table of Contents
HD Industrial Endoscope
Model: C30-M
PRODUCT DESCRIPTION
C30-M is a high-precision industrial endoscope camera with a 4.3-inch HD color
display. It adopts an ergonomic design, is easy to operate, real-time viewing
of high-definition real images. This product is equipped with a small-diameter
HD camera with LED auxiliary lighting.
The camera adopts a high-sensitivity chip, which can be used normally even in
a dark working environment.
SAFETY AND MAINTENANCE
- The product is an industrial endoscopy camera and is not intended for medical use or human examination.
- Do not hit the camera violently and do not pull the cable.
- When used in an environment with sharp bumps, please use it carefully to prevent the waterproof protective layer of the probe from being scratched.
- The camera probe is not made of heat-resistant and high-temperature materials. When checking the automobile engine, please ensure that the temperature in the engine drops to the normal temperature.
- When not in use, please ensure that the lens and the main unit are clean and dry, and avoid contact with oil, etc. or other corrosive and dangerous substances.
- This product is not suitable for people with limited physical, sensory or mental abilities.
- Do not allow children to touch and operate this equipment.
- If you encounter any unsolvable product use problems, please contact us actively for after-sales service.
BATTERY INSTRUCTIONS
- Please use a（5V 1A） household charger that meets the safety regulations to charge the equipment. Fast charging is not supported.
- This device supports charging while using.
- lf the device is not used for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the battery.
FUNCTION INTRODUCTION
-
Color/Black and white
Through it, you can switch between black and white for better effects in dark environments. -
To rotate
The picture is rotated 180 degrees, easy to adjust the angle, better observation -
LED adjustment “+”
The brightness of the LED light can be gradually increased from 0-60-80-100% -
LED adjustment “-”
The brightness of the LED light gradually decreases from 100-80-60-0% -
Compared
Different details can be seen in different places by adjusting the positive- boost-weak cycle adjustment -
Zoom out
After the picture is enlarged, it can be adjusted to return to normal 2.0-1.5-1.0x gradually decreasing -
Zoom in
Image magnification 1.0-1.5-2.0x incrementally -
Power button
Press and hold for 3 seconds to turn on and off the power of the machine
Charging Guide
- Connect the device to the Type-C adapter for charging(5V 1A). The product does not support fast charging.
- The red signal light is always on when charging, and the green light is always on when the product is fully charged.
FAQ
-
Lags happened during the photo outputting of the product
Please check whether the product has sufficient power, or restart the device. -
Imaging screen is not clear
The best imaging focal length of the product is: 2cm-10cm, please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth. -
Product charging
Please use (5V 1A) charger to charge the device.The product does not support fast charging. -
The camera is heat
It is normal for the camera to heat up, especially when the camera LED light is on at the highest brightness. But it does not affect normal use or service life.
Accessories installation Guide
Accessories
Hook(1)，Magnet(1)，Mirror(1)，Fixing device(3)
Installation diagram
Specifications
Camera diameter: 8mm
Camera resolution: 1920*1080
Viewing angle: 70°
Focusing range: 20-100mm
Auxiliary lighting: 8 adjustable brightness LEDs
Screen type: 4.3-inch color display
Charge port: Type-C
Battery working time: 3.5 hours
Battery charging time: 3 hours
Operating temperature: -10°C~45°C
Camera temperature: -10°C~80°C
Shutdown power consumption：30uA
Cable length: 1/5/10/20/30m