Qlight STA25SLM Slim LED Tower Lights Instruction Manual

Slim LED Tower Lights
STA25/ 35/ 45SLM

STA25SLM Slim LED Tower Lights

Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.

Precautions for Safety

Failure to follow the instructions below may cause a loss of life or serious physical injury.

1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)

Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.

1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.

Ordering Specifications

• STA25SLM/ STA35SLM

• STA25SLM
• STA35SLM| • Layer1-1
• Layer2-2
• Layer3-3
• Layer4-4
• Layer5-5| • 12-DC12V
• 24-DC24V
• 110-AC110V
• 220-AC220V| R-Red
A-Amber
G-Green
B-Blue
W-White

• STA45SLM(P)

• STA45SLM
• STA45SLM-BZ
• STA45SLMP
• STA45SLMP-BZ| • Layer1-1
• Layer2-2
• Layer3-3
• Layer4-4
• Layer5-5| • 12-DC12V
• 24-DC24V| R-Red
A-Amber
G-Green
B-Blue
W-White| • (Blank)
– Standard type
• Mounting type
-LB18 -LW18
-QZ18 -SZ18
-QL18 -SL18
-QLA18

https://www.qlight.com/en/products/?qpcateid=8

Please scan the QR code for more detailed product information.
www.qlight.com

Product Specifications
• STA25SLM

Model number| Layer| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
STA25SLM steady type| 1| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.080A
0.040A
0.020A
0.020A| | 0.19kg| R-Red
2| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.160A
0.080A
0.040A
0.040A| 0.21kg| R-Red
G-Green
3| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.240A
0.120A
0.060A
0.060A| 0.23kg| R-Red
A-Amber
G-Green
4| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.320A
0.160A
0.080A
0.080A| 0.24kg| R-Red
A-Amber
G-Green
B-Blue
5| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.400A
0.200A
0.100A
0.100A| 0.26kg| R-Red
A-Amber
G-Green
B-Blue
W-White

※ CE compliant : DC24V
※ UL listed : DC24V

• Protection rating : IP44
• Ambient operating temperature : -30°C to +50°C

• STA35SLM

Model number| Layer| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
STA35SLM steady type| 1| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.100A
0.050A
0.020A
0.020A| ****| 0.38kg| R-Red
2| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.200A
0.100A
0.040A
0.040A| 0.40kg| R-Red
G-Green
3| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.300A
0.150A
0.060A
0.060A| 0.42kg| R-Red
A-Amber
G-Green
4| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.400A
0.200A
0.080A
0.080A| 0.45kg| R-Red
A-Amber
G-Green
B-Blue
5| AC/DC12V
AC/DC24V
AC110V
AC220V| 0.500A
0.250A
0.100A
0.100A| 0.48kg| R-Red
A-Amber
G-Green
B-Blue
W-White

※ CE compliant : DC24V

• STA45SLM

Model number| Layer| Voltage| Current| Certificate| Weight| Color
---|---|---|---|---|---|---
STA45SLM steady type
STA45SLM -BZ Steady/w built-in buzzer| 1| AC/DC12V AC/DC24V| 0.100A
0.050A| | 0.50kg| R-Red
2| AC/DC12V AC/DC24V| 0.200A
0.100A| 0.54kg| R-Red G-Green
3| AC/DC12V AC/DC24V| 0.300A
0.150A| 0.58kg| R-Red
A-Amber
G-Green
4| AC/DC12V AC/DC24V| 0.400A
0.200A| 0.63kg| R-Red
A-Amber
G-Green
B-Blue
5| AC/DC12V AC/DC24V| 0.500A
0.250A| 0.68kg| R-Red
A-Amber
G-Green
B-Blue
W-White

※ CE compliant : DC24V
※ UL listed : DC24V

• Protection rating : IP44(standard type), IP23(buzzer type).
• Ambient operating temperature: : -30°C to +50°C

• STA45SLMP

STA45SLMP steady type
STA45SLMP -BZ Steady /w built-in buzzer| 1| AC/DC12V AC/DC24V| 0.100A
0.050A| | 0.56kg| R-Red
2| AC/DC12V AC/DC24V| 0.200A
0.100A| 0.60kg| R-Red
G-Green
3| AC/DC12V AC/DC24V| 0.300A
0.150A| 0.64kg| R-Red
A-Amber
G-Green
4| AC/DC12V AC/DC24V| 0.400A
0.200A| 0.69kg| R-Red
A-Amber
G-Green
B-Blue
5| AC/DC12V AC/DC24V| 0.500A
0.250A| 0.74kg| R-Red
A-Amber
G-Green
B-Blue
W-White

※ CE compliant : DC24V
※ UL listed : DC24V

Dimensions

Wiring Instructions

• STA25SLM, STA35SLM, STA45SLM(P) can be wired by using both external contact and transistor.
• In case of wiring by transistor, please make sure if it is NPN type or PNP type. Please carefully follow wiring instruction below.

| Wiring using external contact
---|---
DC steady type| STA25SLM-DC
STA35SLM-DC| STA45SLM/ST45SLMP-DC
| Transistor(I/O unit)
DC steady type
(NPN Transistor)| STA25SLM-DC
STA35SLM-DC| STA45SLM/ST45SLMP-DC
DC steady type
(PNP Transistor)| STA25SLM-DC
STA35SLM-DC| STA45SLM/ST45SLMP-DC

• External power line/ External signal line – UL1007 AWG22(0.3sq) 400mm

Parts Definition/ Installation

Mounting Hole Specifications

• Machine holes on the mounting surface referring to the diagram below.

Mounting Accessories (Sold Separately)

• Please refer to the dimensions below for installation of mounting brackets

■ STA25SLM/ STA35SLM/ STA45SLM-Direct Mounting Type Model

| STA25SLM/ STA35SLM| STA45SLM
---|---|---
Dimensions| |

Installation Environment and Protection Rating

• This product is designed for indoor use with protection rating of IP44(standard type) or IP23(buzzer type).
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated, it may cause malfunction or damage to the product.
• For further information, please visit our website ( www.qlight.com ).

Mounting Accessories (Sold Separately)

• Please refer to the dimensions below for installation of mounting brackets

■ STA45SLMP – Pole Mounting Type Model

| Dimensions
---|---
STA45SLMP| 18mm SCREW & NUT| LB18
LW18| SZ18
QZ18| SL18
QL18| QLA18

Technical Certification

• Qlight products are designed to meet strict quality and technical standards. Thus, the Qlight brand is widely recognized for its high quality and technical innovations from leading institutions around the world.

| ISO International Organization for Standardization
Qlight quality assurance systems have been certified by ISO by applying the ISO 9001:2008, KS Q1SO 9001:2009 regulation.| | IECEx International Explosion Proof Certification (IECEx)
Certified that Qlight’s products are being manufactured and manage according to international standards.
---|---|---|---
| ATEX The European Regulatory Framework or Manufacture, Installation and Use of Equipment in Explosive Atmospheres
Qlight’s explosion proof products comply with ATEX Directives 94/9/EC.| | NEPSI National Supervision and Inspection Center for Explosion Protection and Safety of Instrumentation
Qlight’s design and manufacturing system meets the People’s Republic of China National explosion proof Standard. (Chinese Standard-GB3836/GB12476)
| KCs Explosion Proof Device Safety Certification System
The safety performance of machines and equipment subject to safety certification and Technical capability and production system have been certified safety certification standards.| | TIS Japan Explosion-proof Certification
TIS is a Japanes explosion proof test and certification system accordance wit the Ministry of Health, Labour and Welfare Notice and the explosion proof guidelines for factory electrical equipment Qlight’s explosion proof products hasve been tested and certified by TIS.
| CCS China Classification Society
Qlight’s design and quality assurance system has been certified by the China Classification Society.| | RMRS Russian Maritime Register of Shipping
Qlight’s design and quality assurance system has been certified from Russian Maritime Register of Shipping.
| LR Lloyd’s Register
Qlight’s design and quality assurance system has been certified from Lloyd’s Register.| | KR Korean Register of Shipping
Qlight’s design and quality assurance system has been certified by the Korean Register of Shipping.
| KC Korea Safety Certification
Qlight’s products are certified by KC for preventing accident caused by fire.| | E-mark Commission Directive Regarding Vehicle Industry
Qlight has obtained EU mark for approved vehicles and vehicle components sold into the EU(EEA : European Economic Area)
| ICAO International Civil Aviation Organization
Olight guarantees our products satisfy the criteria regulated by the International Civil Aviation Organization(ICAO, FAA).| | KCC Conformity Assessment of Broad-casting Communication Equipment
Qlight has been certified to protect the electromagnetic environment that causes unwanted electromagnetic waves from the device, communication failure due to other devices or external radio waves, and malfunction of the device.
| UL Underwriters Laboratories
Qlight’s design and quality assurance system has been certified from UL to ensure the stability of consumption goods and to protect consumers.| | CCCF China Certification Center for Security & Protection
Qlight has passed the rigorous examination process of “Passing Fire Protection Products Centering” In order to sell fire-fighting products such as fire alarm equipment
to Chinese market.
| CCC China Compulsory Certificate
Qlight’s has obtained CCC which guarantees safety, protection against fraud, environment, etc.| ****| CE European Commission
Qlight has been certified by the European Commission.
| RoHS2 Restriction of Hazardous Substances Directive
Qlight complies with the Restriction of Hazardous Substances Directive by limiting its use of hazardous materials.| |

For your safety
Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement.
The newest product information is available on our website.( www.qlight.com )
Please read the instruction manual attached to the product carefully before installation and use.

Qlight Co., Ltd. www.qlight.com | trade@qlight.com
Head Office | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo, Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept | 704 Nakdong-daero, Sasang-gu, Busan, Korea (Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team Office | 704 Nakdong-daero, Sasang- gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017

Qlight USA, Inc. www.qlight.com www.qlightusa.com | sales@qlightusa.com
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 – 408 – 519 – 5740 Fax. +1 – 408 – 519 – 5739

SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com www.qlightcn.com | qlightcn@qlight.com
China Factory/ Shanghai Sales Office | #19, Nanda Road, Baoshan Area, Shanghai, China Tel. +86 – 21 – 6651 – 7100 Fax. +86 – 21 – 6315 – 3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial Development Zone, Qidong, Jiangsu Province, China
Tel +86- 513- 8384- 9999 Fax +86- 513- 8384- 9910

Product Operation Inquiry / Customer Support +82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805)

Innovation in Alarm & Signal
www.qlight.com
EN – STA45SLM – 2106A

Documents / Resources

| Qlight STA25SLM Slim LED Tower Lights [pdf] Instruction Manual
STA25SLM Slim LED Tower Lights, STA25SLM, Slim LED Tower Lights, Tower Lights
---|---

References

• Qlight - Warning Light, Beacon, Audible & Visual Signal, Tower Light
• 可莱特(Qlighte)_专注多层信号灯、声光报警器,防爆警示灯,机床照明灯等产品的生产和销售
• Signal Tower Lights, Warning Lights & Electric Horns, Fully Enclosed Products, Explosion proof Products, LED Work Lights-Qlight

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>