QLIGHT P340 Multipurpose High Bay Motion Sensor Instruction Manual
- June 9, 2024
- QLIGHT
Table of Contents
QLIGHT P340 Multipurpose High Bay Motion Sensor
Application
Automatically ON/OFF function:
Daylight threshold is on 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/200Lux；
Standby period is 0s; Light on when detect movement and off after people leave
at night. Applications: Corridor, Staircase.
- With sufficient daylight, even when motion detected, light remains OFF.
- With insufficient daylight, when motion detected, light ON.
- After the last detection and the present hold time elapsed, light OFF.
No daylight function
Daylight threshold is on “Disable”; Standby period is on
0s/10s/30s/1min/5min/10min/30min/60min.
Light on when detect movement, After people leave, Light off after stand-by
period.
Stand-by period is set to +∞，The light will always remain ON.
- When motion is detected, the sensor will switch on the light to 100% brighteness.
- After people leave the detection area, light remains 100% brightness within hold time.
- After the last detection and the present hold time elapsed, light OFF.
Function Demo – Dimmable control/Corridor function
Daylight threshold is on 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/200Lux;
Standby period is on 0s/10s/30s/1min/5min/10min/30min/60min.
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
- With sufficient daylight, even when motion detected, light remains OFF.
- With insufficient daylight, when motion detected, light ON.
- After last detection, the light will be dimmed down to the stand-by dimming level (10%, 20%,30% or 50%) after holdtime.
- After the stand-by period, light OFF.
Daylight Priority
Dusk/Dawn sensor:
Dual-PD technology brings a fully automatic dusk/dawn sensor which can tell
the difference between natural light and LED light, to ensure the light will
be off when needed.
Precondition of Daylight priority:
- Daylight threshold is on 30Lux/50Lux/80Lux/120Lux;
- Standby period is +∞ ；
- Standby dimming level is on 10%/20%/30%.
Application____Daylight priority
Daylight threshold is on 30Lux/50Lux/80Lux/120Lux;
Standby period is +∞; Standby dimming level is on 10%/20%/30%.
- Light automatically on when ambient brightness is lower
- With insufficient ambient brightness, light dims to 100%
- Light dims to standby level if no motion detected after holdtime.
- Light off when ambient lux level is higher than preset lux amount.
Specification
Input
| Voltage| 10.5-15V DC (Currect Required>30mA)
---|---|---
Standby Consumption| <30mA (Power Consumption）
Output| Dim Output| DIM 1-10V
Daylight Priority Function
| Detection area：120Lux/80Lux/50Lux/30Lux Stand-by period：+∞
Stand-by dimming level：10%/20%/30%
Sensor Parameters
| Detection Area| 25%/50%/75%/100%
Holdtime| 5s/30s/1min/3min/5min/10min/20min/30min
Daylight Threshold| 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by Period| 0s/10s/30s/1min/5min/10min/30min/60min+∞
Stand-by Dimming Level| 10%/20%/30%/50%
Microwave Frequency| 5.8GHz±75MHz
Microwave Power| <0.3mW
Mounting Height| ≤12m/39.36ft (Ceiling Mounted)
Detection Range| Max,ø16m/52.49ft (Ceiling Mounted)
Motion Detection| 0.5~1m/s
Others
| Temperature| -20°C~+60°C
IP Grade| IP65
Warranty| 5 Years
Remark
| Factory Default Setting: Detection area 100%/ Hold time 5s/ Daylight threshold Disable/ Stand-by period 0s/Stand-by dimming level 10%.
Detection coverage
Typical installation height 8-12m.
This figure indicates the maximum distance at the highest mounting height with
100% sensitivity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>