Qlight S60ADB Signal Light with High Volume Built In Buzzer Instruction Manual
- June 10, 2024
- QLIGHT
Table of Contents
- S60ADB Signal Light with High Volume Built In Buzzer
- **** Precautions for Safety
- **** Precautions for Correct Use
- Ordering Specifications
- Product Specifications
- Dimensions
- Wiring Instructions
- Parts Definition/ Installation/ Light Function Selection
- Bulb Replacement Instructions
- Mounting Hole Specifications
- Technical Certification
- Documents / Resources
Signal Light with High Volume Built-in Buzzer
S60ADB/ S60ADL/ S60ADS
S60ADB Signal Light with High Volume Built In Buzzer
Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use.
**** Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
- During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
- Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury, malfunction or damage to the product.)
- Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
- Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
- When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to follow this may cause damage to property, fire, electric shock and loss of life.)
**** Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product that would void the warranty.
- Please remove any objects that can interrupt ventilation around the product.
- Please turn off the power of the product immediately if it fails to operate properly.
- Carefully wire the product according to each product’s specification.
- Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
- Do not apply excessive force/impact to the product.
- Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
S60ADL
[Model number] |
• S60ADL
• S60ADS
• S60ADB| 12/24
[Voltage] |
• 12-DC12V
• 24-DC24V
• 110-AC110V
• 220-AC220V| R
[Color] |
R-Red
A-Amber
G-Green
B-Blue
---|---|---
Please scan the QR code for more detailed product information . www.qlight.com
https://www.qlight.com/en/products/?qpcateid=49
Product Specifications
LED Steady/Flashing Signal Light
Model number| Voltage| Current| Bulb specifications|
Certificate| Weight| Color
---|---|---|---|---|---|---
volts/ Watts| Confi-guration| Partit
S6OADB| DC12V| 1.008A| 12V1OW| T16x35
15S| 9| CE| 0.19kg| R Red
A _ Amber
G – Green
B – Blue
DC24V| 0.556A| 24V10W| 10| 0.19kg
AC110V| 0.127A| 110V1OW| 12| 0.18kg
AC220V| 0.064A| 220V10W| 13| 0.18kg
※ CE compliant : DC24V, AC110V/220V
Xenon Lamp Strobe Signal Light
Model number| Voltage| Current| Certificate| Weight|
Color
---|---|---|---|---|---
S60ADL| DC12V| 0.166A| CE| 0.17kg| R Red A-Amber
G -Green B – Blue
DC24V| 0.125A| 0.17kg
AC110V| 0.043A| 0.32kg
AC220V| 0.022A| 0.32kg
※ CE compliant : DC24V, AC110V/220V
Bulb Steady/Flashing Signal Light
Model number| Voltage| Current| Certificate| Weight|
Color
---|---|---|---|---|---
S6OADS| DC12V| 0.555A| CE| 0.29kg| R Red A-Amber
G -Green B – Blue
DC24V| 0.266A| 0.29kg
AC110V| 0.088A| 0.27kg
AC220V| 0.044A| 0.27kg
※ CE compliant : DC24V, AC110V/220V
- Buzzer sound volume : Max.100dB at 1m
- Protection rating : IP54
- Ambient operating temperature : -30°C to +50°C
Dimensions
Wiring Instructions
-
S60ADB : External power line – UL1015 AWG18(0.75sq) x 2C 400mm
External signal line – UL1007 AWG22(0.3sq) 400mm -
S60ADL/ S60ADS : External power line – UL1007 AWG22(0.3sq) 400mm
-
This product can be wired regardless of polarity.
Parts Definition/ Installation/ Light Function Selection
Parts Definition/ Installation
- First, machine taps or holes on the mounting surface.
- The mounting hole of this product bracket is 6mm in diameter.
- When machining taps, fasten the bolt through the mounting hole of the bracket.
- When machining holes, insert the bolt through the hole of the bracket, and tighten the nut from the opposite side of the mounting surface.
Light Function Selection(S60ADL only)
- Please refer to the chart below to use light function selection switch(①) located inside the product.
- Default function is set at steady LED. Select the desired function for your application during installation.
Bulb Replacement Instructions
- Please wait at least 1 minute after turning off the power before replacing the bulb.
- In order to dissemble the bulb, please push down the bulb(①) lightly and screw it counterclockwise.
- In order to put the bulb in to the unit, please place the bulb(①) in the socket(②) and screw it clockwise while lightly pushing down the bulb.
Mounting Hole Specifications
- Machine holes on the mounting surface referring to the diagram below.
Installation Environment and Protection Rating
-
This product is designed for use with protection rating of IP54.
-
If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP54), it may cause malfunction or damage to the product. -
In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside down positions where water can potentially penetrate into the product and impact it’s operation.
-
For further information, please visit our website ( www.qlight.com ).
Technical Certification
- Qlight products are designed to meet strict quality and technical standards. Thus, the Qlight brand is widely recognized for its high quality and technical innovations from leading institutions around the world.
| ISO International Organization for Standardization
alight quality assurance systems have been certified by ISO by applying the
ISO 9001:2008, KS 0 ISO 9001:2009 regulation.| | .
IECEx International Explosion Proof Certification (IECEx)
Certified that alight’s products are being manufactured and manage according
to international standards.
---|---|---|---
| ATEX The European Regulatory
Framework or Manufacture, Installation and Use of Equip- ment in Explosive
Atmospheres
alight’s explosion proof products comply withATE X Directives 94/9/EC.| |
NEPSI National Supervision and hspeclion Center for Explosion Protection and
Safety of Instrumentation
alight’s design and manufacturing system meets the People’s Republic of China
National explosion proof Standard. (Chinese Standard-GB3836/GB12476)
| KCs Explosion Proof Device
Safety Certification System
The safety performance of machines and equipment subject to safety
certification and Technical capability and production system have been
certified safety certification standards.| | TIIS Japan Explosion-proof
Certification
TIIS is a *ones explcsion proof test aid certifiatbn system accordance with
the Minisb-y of Health, Labour and Welfare Notice and the explosion prod
guidelines br factory electrical entrapment. ()light’s explosion roof product
hasve been tested ad centred by TES
| CCS China Classification Society
alight’s design and quality assurance system has been certified by the China
Classification Society.| | RMRS Russian Maritime Register of Shipping
alight’s design and quality assurance system has been certified from Russian
Maritime Register of Shipping.
| LR Lloyd’s Register
alight’s design and quality assurance system has been certified from Lloyd’s
Register.| | KR Korean Register of Shipping
alight’s design and quality assurance system has been certified by the Korean
Register of Shipping.
| KC Korea Safety Certification
alight’s products are certified by KC for preventing accident caused by fire.|
| E -m ark Commission Directive Regarding Vehicle Industry
alight has obtained EU mark br approved vehicles and vehicle components sold
into the EU(EEA : European Economic Area)
| ICAO International Civil Aviation Organization
alight guarantees our products satisfy the criteria regulated by the
International Civil Aviation Organization(ICAO, FAA).| | K CC Conformity
Assessment of Broad-casting Communication Equipment
alight has been certified b protect be electromagnetic environment that causes
unwanted electromagnetic waves from the device, communication failure die to
other devices or external radio waves, and ma function of the device.
| UL Underwriters Laboratories aights design and quality assurance system
has been certified from UL to ensure the stability of consumption goods and to
protect consumers.| | CCCF China Certification Center for Security &
Protection
alight has passed the rigorous examination process
of Passing Fire Protection Products Centering’ In order to sell fire-fighting
products such as fire alarm equipment to Chinese market.
| CCC China Compulsory Certificate
alight’s has obtained CCC which guarantees safety, protection against fraud,
environment, etc.| **| CE European Commission
alight has been certified by the European Commission.
| RoHS2 Restriction of Hazardous Substances Directive**
alight complies with the Restriction of Hazardous Substances Directive by
limiting its use of hazardous materials.
For your safety
Specification and dimensions listed in this catalogue subject to change
without notice for product quality improvement.
The newest product information is available on our website.(
www.qlight.com )
Please read the instruction manual attached to the product carefully before
installation and use.
Qlight Co., Ltd. www.qlight.com |
trade@qlight.com
Head Office | Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu,
Seoul, Korea
Tel. +82-2-2679-6152(Toll free. +82-80-328-2222) Fax. +82-2-2679-6154
Factory | 185-25, Mukbang-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnamdo,
Korea Tel. +82-55-328-1111(Toll free. +82-80-328-1111)
Qlight OverSEAs Sales Dept | 704 Nakdong-daero, Sasang-gu, Busan, Korea
(Eomgung-Dong) Tel : +82-51-620-4100
Qlight Public Relations & Marketing Team Office | 704 Nakdong-daero, Sasang-
gu, Busan, Korea(Eomgung-Dong) Tel. +82-51-245-0017
Qlight USA, Inc. www.qlight.com
www.qlightusa.com |
sales@qlightusa.com
3003 North First Street, Suite #341, San Jose, CA 95134 USA Tel. +1 – 408 –
519 – 5740 Fax. +1 – 408 – 519 – 5739
SHANGHAI Qlight Electronic Co., Ltd. www.qlight.com
www.qlightcn.com |
qlightcn@qlight.com
China Factory/ Shanghai Sales Office | #19, Nanda Road, Baoshan Area,
Shanghai, China Tel. +86 – 21 – 6651 – 7100 Fax. +86 – 21 – 6315 – 3929
China Factory Site 2 (Qidong) | #33, Haiyan Road, Qidong High-tech Industrial
Development Zone, Qidong, Jiangsu Province, China
Tel +86- 513- 8384- 9999 Fax +86- 513- 8384- 9910
Product Operation Inquiry / Customer Support +82-51-620-4100
You can expect prompt service if you have exact information such as model
name, symptom, telephone number and address.
※ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT
NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu,
Seoul, Korea (Postal Code : 08507)
Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do,
Korea (Postal Code : 50805)
www.qlight.com
S60ADB – 2106A
Documents / Resources
|
Qlight S60ADB Signal Light with High Volume Built In
Buzzer
[pdf] Instruction Manual
S60ADB Signal Light with High Volume Built In Buzzer, S60ADB, Signal Light
with High Volume Built In Buzzer, Volume Built In Buzzer, Built In Buzzer
---|---
References
- Qlight - Warning Light, Beacon, Audible & Visual Signal, Tower Light
- 可莱特(Qlighte)_专注多层信号灯、声光报警器,防爆警示灯,机床照明灯等产品的生产和销售
- Signal Tower Lights, Warning Lights & Electric Horns, Fully Enclosed Products, Explosion proof Products, LED Work Lights-Qlight