maxell DMH1000 Smart Dehumidifier and Air Purifier User Manual

maxell DMH1000 Smart Dehumidifier and Air Purifier

POINTS FOR ATTENTION

Before using, please read this user manual carefully and keep it for future reference.

WARNING

1. To avoid electric shock and fire, do not allow water, liquid or any flammable detergent to get into or to clean the product.
2. Do not spray insecticide, perfume or other flammable spray around the products.
3. Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
4. This product can not replace normal ventilation, daily dust collection or oil pumping when cooking.
5. Ensure the product is used in condition of a stable and horizontal level.
6. Leave at least 30cm of space on the back and sides of the product, and at least 50cm of space above the product when using.
7. Ensure both the filter and its cover are properly installed before using.
8. Do not insert finger or other things into the air outlet/inlet to prevent physical damage or trouble

PRODUCT OVERVIEW

Components

Control Panel

INSTALLATION FILTER

1. Pull and lift the filter cover on the front shell.
2. Remove the filter.
3. Remove the packaging on the new filter
4. Insert the new filter into the machine
5. Put the filter cover back to the machine:
6. Lock the bottom of the filter cover in the bottom of the front shell (1).
7. Then push the cover toward the body of machine (2).
8. After replacing the filter, please turn on the machine and press the purification button for seven seconds to reset.

NOTICE

1. Turn off the machine, and disconnect with the power socket.
2. Ensure the handle of the filter is on the outside.
3. Please replace the filter which is specially designed for this product

SPECIFICATIONS

FUNCTION INSTRUCTION

Purification dehumidifier combines with functions of dehumidification and purification, providing three working models for users to enjoy fresh air and suitable humidity in the meanwhile.

Water full instruction

1. When the water tank is full, the machine will be auto-off and its indicator light will change to red and keep flashing.
2. Put the water tank back to the machine after pouring the water to restart.

Reminder for replacing filter instruction

1. When the machine detects that the filter is needed replacing, the LED light will change from green to orange and keep flashing.
2. Press the purification button for 7 seconds to reset after replacing a new filter

Low-temperature dehumidifier

The running temperature for the machine is 5ºC to 50ºC, when the temperature is above 5ºC, the machine will continue to work

Button Instruction

After the machine connects with power, the power indicator will turn on.

Purification Button

1. Touch the purification button, its indicator lights on and the device starts running with the LED lighting in green. It starts working in purification.
2. Touch it for second time, the LED light turns off but other functions are normal operation.
3. Touch the button for third time, the device stops working with all lights off.

Note

In the condition of dehumidification, touch the purification button, the dehumidification is off but other functions are in normal operation; touch it for second time, the LED light turns off but other functions are in normal operation; touch it for third time, the device stops working with all lights off

Dehumidification Button

1. Touch the dehumidification button, its indicator lights on and the device starts running with the LED lighting in green. It starts working in dehumidification.
2. Touch it for second time, the LED light turns off but other functions are normal operation.
3. Touch the button for third time, the dehumidification function turn off with the corresponding indicator off but the air purifier continues running with its indicator on

Note:
In the condition of purification, touch the dehumidification button, the dehumidifiction turns on with its corresponding indicator on; touch it for second time, the LED light is off but other functions are in normal condition; touch it for third time, the dehumidification function turns off with its indicator off but the air purifier continues running with its indicator lighting on

Mode Button

1. Press the button to set modes when the function of purification turns on.
2. This button can be set three modes circularly: High-Low grade. The corresponding indicator will turn on after setting.
3. Press mode button for 10 seconds to enter the WIFI connection mode.

At this time, the buzzer will beep 3 times and the WIFI indicator light will flash green. When the device is successfully connected, the WIFI indicator will be on.

WORKS WITH MAXELL SMART APP

Download & Registration

Scan the QR code to download “Maxell Smart” APP. You can also search “Maxell Smart” in either APP store or Google Play to install the APP. Open the “Maxell Smart” APP. tap “Register” to register a “Maxell Smart” account with your phone number or E-mai.Then sign in the APP.

Add Devices in Easy Mode(Recommend

1. Make sure your smart device is energized and your mobile phone is connected to your WiFi network. If the WiFi indicator of smart device keeps flashing to indicate that the smart device enters the mode of configuring the mobile phone; if not,please press the Timer button for more than 5 seconds, after hearing the smart devices “beep”,then loose it and this means the device is already for configuration.
2. Open your “Maxell Smart” APP and tap “+” on the top right of the APP. Select type of service device, tap “All devices” and turn to” Add Device”, then automatically fetch the password of the WiF network that your mobile phone connects to.Then tap “OK” to connect to the device.
3. When appearing “Successfully added 1 device”, it means the connection is complete and your device will be listed in your APP list.

Add Devices in AP Mode

1. If failed in Easy Mode, users could also add devices in AP Mode.
2. Press the Timer button for more than 5 seconds until hearing “beep’and the WiFi indicator light begin to flash quickly,then press the Timer button for another 5 seconds until haring “beep” and the indicator light begin flash slowly,this means the device is already for configuration in the AP Mode.
3. Tap “+”on the top right of the APP. Select Device Type and tap it. Then select “AP Mode”on the top right of the APP. Tap “Connect now” to go to the WLAN Settings interface in your mobile phone and select the WiFi network named “Maxell Smart XXXX” to connect it.
4. Return to the “Maxell Smart” APP,the connection willstart automatically.
5. Retun to the “Maxell Smart” APP,the connection will start automatically. When appears “Successully added 1 device”, it means the connection is complete and your devicewill b listed in your APP list.

Now you can control your smart device via your mobile phone APP anytime and anywhere(Make sure your mobile phone and smart device are all connected to the network,and to change the router name into Maxell Smart XXX).

Q&A

Why falled in adding device?

1. Make sure the device is powered on and close to your moble phone when adding device.
2. Make sure your mobile phone is connected to the WiFi network and your WiFi router is working properly.
3. Make sure the device is ready for configuration.Please refer to the Product Instruction “Add Devices in Easy Mode” or “Add Devices in AP Mode” for details.
4. Make sure the connected devices have not reached the maximum number of WiFi router. If not, please disconnect the network of some devices
5. Make sure password of the WiFi network is correct when adding new device.
6. Make sure you have not used any Chinese Characters to name your WiFi network

Can I control device with 2G/3G/4G/5G network?

When adding device for the frst time, it requires that your mobl phone and dvice are connected to the same WiFi network.After adding device successfly, you can remote control your device with 2G/3G/4G/5G network.

How can I share my device with others?

Open your Maxell Smart APP, select your device and tap the buton in the top right corner. Tap “Shared devices’ and”Add sharing,then select the”country/region”where the account belongs to and input the ” Account number(a phone number or an E-mail address)you want to share with.(Please make sure the phone number or E-mail is registered.)

How can I manager the device shared by others?

Open your Maxell Smart and you can operate the device by tapping the product in the”Shared device I received” on the home page.

How to remove device?

• Method 1:
  Press the Timer/WiFi buton for more than 5 seconds,you wil hear “beep”, it means the device is removed, and the WiFi indicator light begin to flash quickly again.

• Method 2:
  Open your “Maxell Smart”APP,select your device and tap the button in the top right corner.Tap “More”. Then tap the “Remove Device” in the bottom, the WiFi indicator light begin to flash quicky again

METHODS OF POURING WATER

1. The water tank has maximum capacity of 1000ml with 750ml per day working capacity.
2. The machine will auto-off when the water tank is full, the indicator light will turn on.
3. Please turn off the machine when water tank is full, pull out the water tank, and then put it on a horizontal place. Opening the water tank cover with upright direction and pour the water.
4. Please reset the water tank and restart the machine after pouring the water.
5. Do not move or destroy the water tank float, otherwise the machine will not work or cause any other unnecessary breakdowns.
   Notice: Please open the tank cover according to the photo, then pour the water

MAINTENANCE

Cleaning & Storage

1. Ensure the machine is unplugged before maintenance.
2. After opening the water tank cover, use soft cloth with neutral cleanser to clean water tank.
3. Use soft cloth with neutral cleanser to clean away any dust or debris form the surface of the unit and air inlet/outlet.
4. Do not clean the filter with a vacuum cleaner or wash it directly, just put the filter under the sun to sterilize regularly.
5. If you do not use the machine for a long time, ensure the water tank is clean and the machine is completely dry out, put on the dust cover bag and place it in a cool and well-ventilated place.

Notice : Please don´t drop any water into the machine when clean the air outlet

FAQ

Not working

| – Is it plugged into a power socket? Is there a power outage?

– Is the home leakage switch or fuse cut off?

– Is the water full?

Poor performance

(less water in the tank)

| – Is the filter bloqued?

– Is the door opened?

– Is there any obstacle blocking the air inlet/outlet?

– Is there any other equipment releasing steam indoor?

– Is the indoor temperature too low?

(the dehumidification capacity will be weaken in a low temperature and humidity environment)

The air volume becomes smaller| – Is the filter too dirty so that it blocks the air to enter inside?

– Is the air inlet/outlet of the machine blocked by something?

Significant noise

| – Is there anything stuck on the fan in the air outlet?

– Is the machine tilted?

Leakage

| – Is there machine tilted or dumped?

– Is there any water in the tank when moving the machine?

– Is the floating ball in the water tank fall off?

Notice : If the above FAQ can not solve your problems and need maintenance, please contact the supplier or after sales services center. Please do not disassemble the machine to maintain by yourself.

Maxell Corporation of America, 3 Garret Mountain Plaza, 3rd Floor, Suite #300, Woodland Park, NJ 07424.
www.maxell-usa.com.
Maxell Latin America, PH Oceanía Plaza Torre 2000, Panama City, Rep. of Panama.
www.maxell-latin.com
Maxell Canada, 8500 Leslie Street, Suite 101, Markham Ontario, Canada L3T 7M8.
www.maxellcanada.com
Maxell Europe Limited Ground Floor, Block E Sefton Park, Bells Hill Stoke Poges Buckinghamshire SL2 4HD
Email : hq@maxell.eu
Termék: Okos Légtisztító, Páramentesíto fülhallgató
Maxell Europe Ltd Hungary Branch Office, H-1095 Budapest, Máriássy Utca 7.Hungary
Email: mhb@maxell.eu
www.maxell.eu

Warranty

• 1 year warranty

References

• Maxell Latinoamérica
• Maxell USA - Home Page
• Maxell Worldwide
• Maxell

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>