mossloo 7143-56 15W MagClick Fast Wireless Charger Instruction Manual

mossloo 7143-56 15W MagClick Fast Wireless Charger

INSTRUCTIONS MANUAL

Features

1. Wireless Charging Surface
2. Type-C Input Port

What’s included

1. 1x Wireless Charging Pad
2. 1x Instruction Manual

Tech Specifications

1. Input power: 9V/2A
2. Output power: 5W/7.5W/10W/15W

INSTRUCTIONS

Wireless Charging Mobile phones and other electronic devices:

• Connect the USB tip of the cable to a power source, the wireless charger is in standby mode and ready to begin charging.
• Place the wireless charging supported mobile device on the wireless charging surface(1), the device is charging.
• The phone will begin to charge automatically. Once fully charged remove the device.

Note: When wireless charging, if it does not work, the device is either NOT a wireless charging device or there is an object between the the device and charging surface interfering with the charging process.

2Wireless Charging with Magnetic Surface

If your wireless charging compatible device contains magnets, it would just click to the magnetic surface(1) of the pad for better alignment to secure wireless charging. This item is also compatible with other items, the magnetic function just won’t work.

SAFETY PRECAUTIONS

Read all the instructions before using the product.

WARNING: When using this product, basic precautions should always be followed:

1. Read all the instructions before use.
2. Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C).
3. Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
4. To reduce the risk of injury, close, supervision is required when the product is used near children.
5. Do not expose the device to moisture.
6. Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.
7. Do not use the device if damaged or modified. Damaged or modified batteries may exhibit] unpredictable behavior resulting in fire, explosion or risk of injury.
8. Do not disassemble the device. For repairs seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
9. Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104° F (40°C) may result in an explosion.
10. To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
11. Attachments on the back of your phone can impede the effectiveness of the wireless charger and lead to overheating. Please remove attachments from the phone before charging on this device.
12. The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video tapes, mechanical watches, hearing aids, loud speakers and VCRs. Pace-makers may be damaged or switch to “Test Mode” in the presence of a strong magnetic force, if a pace-maker or other electrical body implant is in use, keep a minimum of 3 feet distance.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guide lines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>