Shenzhen Mossloo Industrial MSL-M6020Q Bamboo Fast Wireless Charging Dock Station Instruction Manual

Bamboo Fast Wireless Charging Dock Station
Instruction Manual
MSL-M6020Q

Functions:

1. Wireless Charging Output Surface
2. USB-A Outputs
3. DC Input Port
4. Watch Charging Stand
5. Pad/Phone Holder
6. Earbuds Charging Case Stand
7. Accessories Holder
8. LED Indicator
9. AC Adapter

What’s included:

• 1 x Wireless Charging Dock Station
• 1 x UL Listed AC adapter
• 1 x Instruction Manual

Tech Specification

• AC Adapter Input: 12V/2A
• USBA Output 1/2/3: Total 5V/2.4A (Max)
• Wireless Output: 5W/7.5W/10W

Instructions:

1. Wireless Charging Mobile phones and other electronic devices:
   • Connect the provided UL Listed AC adapter cable to the DC input port(3) of the charging station, then connect the AC adapter to a power source.
   The LED indicator will glow GREEN when the device is in wireless charging standby.
   • Place the wireless charging supported mobile device on the wireless charging surface(1), the LED will glow RED when the device is charging.
   • Once fully charged remove the device.
   ** Note: When wireless charging, if the LED indicator flashes the device is either not a wireless charging device or there is an object between the device and charging
   surface interfering with the charging. process.

2. Charging mobile phones and other electronic devices:
   • Connect the charging cable to your mobile phone/device using the appropriate connector.
   • Connect the USB port of the cable into the USB-A Output(2).
   USB-A 1: 5V/1A; USB-A 2: 5V/1A ;
   USB-A 3: 5V/2.4A.
   • Remove the cable from your mobile device when it is fully charged.

3. Smart Watch Charging Cable Stand:
   • Take the USB end of the watch charging cable(NOT INCLUDED) and run it through the front of the watch charging stand(4).
   • Plug the watch charging cable into the USB-A 1 Output(2) of the station.
   • Take the charging end of the cable and place it in the designated cut out on the stand, if placed correctly charging surface should be flat with the bamboo of the stand.
   • Place your watch on the stand to begin charging, remove once fully charged.

4. True Wireless Earbuds Charging Stand:
   • Plug the USB end of the charging cable (NOT INCLUDED) into the USB-A 1
   • Output(2) and pull the other side of the cable through the hole of the earbud charging case stand(6).
   • Connect your earbuds charging case with the tip to begin charging, remove once fully charged.

SAFETY PRECAUTIONS:

* WARNING- When using this product, basic precautions should always be followed:

1. Read all the instructions before use.

2. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).

3. Do not overcharge your phone. The unit may become hot under excessive use.
   Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.

4. To reduce the risk of injury, close supervision is required when the product is used near children.

5. Do not expose the device to moisture.

6. Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.

7. Do not use the device if damaged or modified

8. Do not disassemble the device. For repairs seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury.

9. Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F may cause an explosion.

10. Ensure that qualified service professionals use only identical replacement parts to ensure product safety.

11. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.

12. Please remove any attachments from the phone before charging on this device, attachments can interfere with wireless charging and lead to overheating.

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
* Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

www.fsc.org
MADE IN CHINA

Documents / Resources

| Shenzhen Mossloo Industrial MSL-M6020Q Bamboo Fast Wireless Charging Dock Station [pdf] Instruction Manual
MSL-M6020Q, MSLM6020Q, 2AN8FMSL-M6020Q, 2AN8FMSLM6020Q, MSL-M6020Q Bamboo Fast Wireless Charging Dock Station, Bamboo Fast Wireless Charging Dock Station
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>