mossloo 7122-03 The Looking Glass 10000mAh Wireless Power Bank Instruction Manual
- June 6, 2024
- MOSSLOO
Table of Contents
mossloo 7122-03 The Looking Glass 10000mAh Wireless Power Bank
Features
- LED Indicate,
- Powe,bank ON/OFF Button
- Type C Input
- USBA Output
- Wireless charging surface
What’s included
- 1 x 10,000 mAh Wirnless Powe, Bank 1 x USB to Type C cha,ging臼ble
- 1 x Instruct，。n Manual
Tech Specifications
- 10000mAh13.85V/38.5Wh
- Input p。we.: DC SV尼A
- USBA Output: DC SV/2A
- Wkeless Output: SW
LED indicator
- Press the Powe『bank ON/OFF Button。n(2) on田to view the remaining power臼pacity.
- Press the button twice to tum OFF
Instructions
- Charging the power Bank:
- Charge the power bank fully before usage.
- Connect the pro叫ded charging cable to power source and to the Type C Input port
- Once connected the LED indicator (1)will begin to flash when charging.
- Once fully charged LED will stop flashing
- Charging Electronic Devices with the power bank:
- Connect the charging cable to your m。bile phone/device using the appropriate connect
- Connect the USB port of the cable to USB Output, the LED Indicator will illuminate when charging.
- Remove the charging cable from your mobile device when fully charged
- Charging Electronic Devices with the Wireless Charging:
- press power bank ON/OFF button(2) LED indicator will show Green on the power bank wireless charging standby mode
- Place wireless charging enables device on Wireless Charging Pad(S). The device will begin to charge, LED indicator will turn RED when charging
Note: If the LED indicator is flashing RED an unknown object is being detected between the wireless charging pad and the phone by FOD(Foreign Object Detection) (The device will not begin to charge until the object is moved.)
SAFETY PRECAUTIONS
WARNING-When using this product, basic precautions should always be followed
- Read all the instructions before use
- Never store used this product in temperatures below 32F F(O’C) or above 115’F (45＇。
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully flashed when charging. charged. Never charge your phone for more than 7 hours at a time.
- The unit will only achieve full performance after 2 oe 3 charge and discharge cycles.
- To reduce the risk of in close supervision is required when the product is used near children.
- Do not expose the device to moisture
- Do not use the device in excess fits output rating. overload outputs above the rating may suit in a risk of fire injury
- Do not use the device if damaged or modified
FCC RULES
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>