Shenzhen Mossloo Industrial MSL-M6063Q Night Lamp Wireless Charger Bluetooth Speaker Instruction Manual

Shenzhen Mossloo Industrial MSL-M6063Q Night Lamp Wireless Charger

Bluetooth Speaker

FUNCTIONS

1. Type C input
2.  Vol +/Next Track
3. Speaker ON/OFF
4. Vol-/Previous Track
5.  Power LED Indicator
6.  Wireless Charging LEO
7.  Wireless Charging Pad
8. Lamp!Hander
9. Microphone

What’s included:

• 1 x Bluetooth Speaker
• 1 x USB to Type-C Charging Cable
• 1 x Instruction Manual

Tech Specifications

• Material: ABS+Silicon
• Product Size: 20419158.7mm
• Pairing Name: MSL-M6063Q•
• Bluetooth Version: 5.0
• Type-C Input: DC 5V 3A / 9V 2A
• Wireless Power: 5Wf7.5W/10W/15W
• Lamp Power: 1.5W

Instructions:

(Be sure is always connected to a power source using the provided cable.)

1. Charging the Speaker:

   • Connect the provided charging cable to a power source and to the Type-C port (1) on the speaker.Once connected that Power LED lndicator(S) will grow GREEN.

2. Bluetooth® Setup:

   • Press and hold Speaker ON/OFF Button(3) to tum ON the speaker.
   • Tum on the Bluetooth function on mobile device, Select “MSL-M6063Q” pairing name.
   • Speaker will automatically pair if the mobile device has been paired before.
   • Press and hold Speaker ON/OFF Button(3) to turn off the device.

3. Using the Speaker:

   • When receiving a phone call, press ON/OFF button to answer and again to hang up.
   • Double press to redial the last call.
   • -Vol+/Next track” (2): Long press – next track. Short press – increase volume.
   • “Vol-/Previous track (4):
   • Long press – previous track Short press – reduce volume

4. Using the Wireless Charging:
   Place wireless charging enable device on Wireless Charging Pad(6). The device will begin to charge, LEO indicator(7) will grow RED when charging.
   Note: If the LED Indicator is “ashing RED, an unknown object is being detected between the wireless charging pad and the phone by FOD(Foreign Object Detectio)­(The device will not begin to charge until object is removed.)

5. Using the Night Lamp:

   • When connected with power source, tap the hander to tum on the lamp(warm tones). the brightness of the night lamp under three gears. When the lamp is off, the bnghtness wlll be increased by one gear every time and the lamp

SAFETY PRECAUTIONS:

Read all the instructions before using the product.

1. To reduce the risk of injury, close supervision is necessary when the product is used near children .
2. Do not expose the device to any moisture.
3. Do not use the device in excess of its output rating. Over1oaded outputs t>_ove rating may result in a risk of fire or mJury.
4. Do not use the device if damaged or modified. Damaged or modified device may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
5. Do not disassemble the device. Take . it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury.
6. Do not expose the device to fire or excessive temperature. Exposure to extreme heat may cause explosion.
7. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
8. This device is not a toy.
9. Do not overcharge Phone. Unit may get hot with excessive use. Remove Phone when it is fully charged. Never charge for more than 7 hours at a time.
10. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove attachments from the phone before charging on this device .

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation .

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>