Shenzhen Mossloo Industrial M2008Q Esquire 5000mAh Power Bank Wireless Charger with Cable User Manual
- June 5, 2024
- Shenzhen Mossloo Industrial
Table of Contents
Shenzhen Mossloo Industrial M2008Q Esquire 5000mAh Power Bank Wireless
Charger with Cable
READ ALL INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THIS MANUAL
In the Box
- Esquire SOOOmAh Power Bank+Wireless Charger with Cable Bl
- Power Cable (xl)
- UserManual(xl)
Safety Precautions
- This product is NOT a toy, keep away from children and pets.
- Only use the device according to the instructions in this manual. Never use the device for anything other than its intended purpose.
- This device is NOT a substitute for proper medical equipment or attention.
- ONLY use the supplied power cable.
- Do not open this product or attempt to repair the unit yourself if it is not working properly. Doing so risks fire, shock or injury.
- When not in use, the device should be stored in a dry, cool location, away from sources of water or heat.
- Do not expose device or power cable to extreme temperatures (heat or cold), open flames, humid or wet conditions.
- Do not submerge in water. Do not use in a location where the device or power cable could fall into liquid.
- Unplug the charging cable when not in use. Do not pull the charging cable to disconnect, or use the cable as a handle.
- Do no use if device or power cable is damaged. If device or power cable is damaged, it MUST be serviced or replaced by the manufacture or its service agent before using again.
- Low battery may cause dysfunction.
- Do not over charge battery.
- This device contains a built-in battery and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this device.
Product
- Wireless Charging Surface
- LED Indicators
- ON/OFF Button
- Built-in 3-in-1 Charging Cable
- USB-C Input
- USB-A Output
- Micro USB Input
Instructions
Charge the power bank fully before usage.
Charging the Power Bank
- Plug the small connector of the included charging cable into the micro-USB charging port on the power bank.
- Plug the large connector into an USB power source, such as the USB port on a computer or into a compatible SV USB adapter (not included) and plug into a wall socket.
- The LED indicator will flash while power is in charging and stay solid when the power bank is fully charged.
Charging Mobile Phones & Other Electronic Devices
- Using the cable of the device you wish to charge, connect the charging cable to your mobile phone/device with the appropriate connector and the USB-A end to the USB-A output of the power bank.
- Or using the built-in cable of the power bank, connect the charging cable to your mobile phone/device with the appropriate connector.
When you charge on iOS device with built-in coble, insert with blank side
facing up:
- The LED indicator will illuminate when charging.
- Remove the cable from your mobile phone/device when it is fully charged.
Wireless Charging Instruction
- Press the ON/OFF button to turn on the wireless charging function. The LED Indicator will glow GREEN indicating the power bank is in wireless charging standby mode ..
- Place a wireless charging enabled device on the charging surface, the device will begin to charge automatically. The LED will glow RED while device is charging.
Note: If the LED indicator is flashing when the wireless charger is in use, either the device is NOT wireless charging enabled, or there is on object between the device and charging pod interfering with the charging process.
LED Indicators
- Press On/Off button once to view the remaining power capacity.
- Press On/Off button twice to turn off LED.
Tech Specifications
- Battery: 5000mAh/3.7V 18.SWh
- Micro USB Input: DC SV/2A
- USB-C Input: DC SV/2A
- USB-A Output: DC SV/2A
- Built-in Cable Output: DC 5V/2A
- Wireless Charging Output: SW
- Total Output: lOW (MAX)
FCC Information
This device complies with Part 15 of the FCC Rules.
Caution: Any changes or modifications not expressly approved could void
the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>