mossloo MSL-M6023Q UVC Sterilizer Wireless Power Bank User Manual
- June 5, 2024
- MOSSLOO
Table of Contents
Mossloo MSL-M6023Q UVC Sterilizer with Wireless Power Bank User Manual
Functions
- UV-C Lights
- LED Indicators
- ON/OFF Button
- UV-C lights ON/OFF Button
- USB-A Output Port
- Type-C Input Port
- Cover
- Wireless Charging Surface/ Sanitizing Compartment
- General Lights
What’s Included
1 x UV Sanitizer w/ Wireless Power Bank
1 x USB-A to Type-C Cable
1 x Instruction Manual
Tech Specifications
- Capacity: 10000mAh/3.7V/37Wh
- Type-C Input: DC 5V/2A
- USB Output: DC 5V/2A
- Wireless Output: 5W
LED Indicators
- ON/OFF Button(3): Press once to view the remaining power capacity.
Instructions
-
Charging the Powerbank:
- Be sure to charge the powerbank fully before usage.
- Connect the provided charging cable to a power source and to the Type-C port on the powerbank(6).
- Once connected the LED Indicator will begin to flash WHITE, when fully charged the LED will stop flashing.
-
Charging Mobile Phones and other Electronic Devices:
- Connect the charging cable to your mobile phone/device using the appropriate connector.
- Connect the USB part of the cable to the USB-A Output(5) of the powerbank. The LED will glow WHITE when charging.
- Remove the USB cable from your mobile device when it is fully charged.
-
Wireless Charging Mobile phones and other electronic devices:
- Press the Powerbank ON/OFF button(3) to turn on the wireless charging function. The 2nd LED Indicator will glow GREEN once the power bank is in wireless charging standby mode.
- Place wireless charging supported mobile device on the charging surface(8), the 2nd LED will glow RED when device is charging.
**Note: When wireless charging, if 2nd LED indicator flashes the device is either NOT a wireless charging device or there is an object between the device and charging surface interfering with the charging process.
-
Using the UV Sanitizing Function:
- Press the UV-C Lights Button(4) to turn on the UV lights. The 1st LED indicator will flash BLUE when UV Sterilizing has started.
- The UV lights will turn off itself after 5mins, or press button(4) to turn off UV lights. (There will be a tick sound and the LED will turn off once sterilizing is done.)
** DO NOT LIFT UP THE COVER(7) ONCE THE SANITIZING PROCESS HAS STARTED:
The UV LED will automatically shut off when you open the lid during sanitizing process.
Safety Precautions
- WARNING-When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury
- Do not use the device if damaged or modified.
- Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, or explosion or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 104°F may cause explosion.
- Ensure that qualified service professionals use only identical replacement parts to ensure product safety.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
EPA Est. NO.:
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.