Mossloo Industrial 966-M6064Q Wireless Charging Bluetooth Speaker with RGB Instruction Manual
- June 5, 2024
- Mossloo Industrial
Table of Contents
Wireless Charging Bluetooth
Speaker with RGB
Instruction Manual
966-M6064Q
Functions:
- Type-C Input
- Speaker ON/OFF
- LED Indicator
- Touch area
- Wireless Charging Pad
- Lamp
What’s included:
1 x Bluetooth Speaker
1 x USB to Type-C Charging Cable
1 x Instruction Manual
Tech Specifications:
- Material: ABS
- Product Size: 112122127mm
- Pairing Name: 966-M6064Q
- Bluetooth Version: 5.0
- Type-C Input: DC 5V 2A / 9V 2A
- Wireless Power: 5W/7.5W/10W/15W
- Lamp Power: 1.5W
Instructions:
(Be sure is always connected to a power source using the provided cable.)
-
Charging the Speaker:
• Connect the provided charging cable to a power source and to the Type-C port ① on the speaker. Once connected that Power LED Indicator ③ will flash blue twice. -
Bluetooth Setup:
• Press and hold Speaker ON/OFF Button ② to turn ON the speaker.
• turn on the Bluetooth function on a mobile device, Select the “ 966-M6064Q ” pairing name.
** Speaker will automatically pair if the mobile device has been paired before.
• Press and hold Speaker ON/OFF Button ② to turn off the device. -
Using the Speaker:
• When receiving a phone call, press the ON/OFF button to answer and again to hang up.
• Press the ON/OFF button to play or pause the music. -
Using the Wireless Charging:
Place wireless charging enables device on Wireless Charging Pad ⑤. The device will begin to charge, and LED indicator ⑤ will turn solid blue when charging. You can place your device on the Wireless Charging Pad both horizontally and vertically.
Note:** If the LED Indicator is flashing RED, an unknown object is being detected between the wireless charging pad and the phone by FOD(Foreign Object Detection). (The device will not begin to charge until the object is removed.) -
Using the Lamp:
When the device is on, you can see the colorful LED on the Lamp area ⑥. Hold the Touch area ④ to turn off the colorful lamp. Tap the Touch area ④ once to turn on the white lamp (warm tones). There are three kinds of brightness for your choice. Tap to choose the brightness you prefer.
SAFETY PRECAUTIONS:
Read all the instructions before using the product.
-
To reduce the risk of injury, close supervision is necessary when the product is used near children.
-
Do not expose the device to any moisture.
-
Do not use the device in excess of its output rating. Overloaded outputs above rating may result in a risk of fire or injury.
-
Do not use the device if damaged or modified.
The damaged or modified devices may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. -
Do not disassemble the device. Take it to a qualified service person when service or repair is required. correct reassembly may result in a risk of fire or injury.
-
Do not expose the device to fire or excessive temperature. Exposure to extreme heat may cause an explosion.
-
Have servicing performed by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the product is maintained. -
This device is not a toy.
-
Do not overcharge your Phone. The unit may get hot with excessive use. Remove the Phone when it is fully charged. Never charge for more than 7 hours at a time.
-
Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.
Please remove attachments from the phone before charging on this device.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation.
* Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Cautions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.