FORTIN 79991 2020 Kia Sedona Push Button Remote Starters and Alarm Systems Instruction Manual
- June 13, 2024
- FORTIN
Table of Contents
REGULAR INSTALLATION
ADDENDUM – SUGGESTED WIRING CONFIGURATION
79991 2020 Kia Sedona Push Button Remote Starters and Alarm Systems
KIA
Sedona
Push-to-start 2019-2021
Vehicle functions supported in this diagram (functional if equipped)
• | Immobilizer bypass Contournement d’immobilisateur |
---|---|
• | Lock |
• | Unlock |
• | Arm |
• | Disarm |
• | Trunk (open) |
• | Sliding door right |
• | Sliding door left |
• | RAP Disable |
• | Tachometer |
• | Parking lights |
• | Door Status |
• | Trunk Status |
• | Hood Status |
• | Hand-Brake Status |
• | Foot-Brake Status |
• | OEM Remote |
monitoring |
FIRMWARE VERSION VERSION LOGICIELLE
76.[60] HYUNDAI/KIA MINIMUM
To add the firmware version and the options, use the FLASH LINK UPDATER or
FLASH LINK MOBILE tool, sold separately. Program bypass option:
UNIT OPTION | DESCRIPTION |
---|---|
C1 | OEM Remote status (Lock/Unlock) monitoring |
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
A11 | Hood trigger (Output Status). |
---|
Parts required (Not included) 1X Fuse
MANDATORY INSTALL
* HOOD PIN
HOOD STATUS : THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE
REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
A11|
---|---
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
WIRING CONNECTION
HOLD PROGRAMMING PROCEDURE
-
Press and hold the programming button:
Insert the 4-Pin (Data-Link) connector.
Release the programming button when the Red LED is ON.
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate. -
Release the programming button when the Red LED is ON.
If the Red LED is not ON solid disconnect the 4-PIN Data-Link harness (Black connector) and go back to step 1. -
Insert the required remaining connectors.
-
Press and release the programming button 6 time (6x).
The RED LED will flash 5 times and pause. -
Press and release the Push-toStart button twice to turn ON the ignition.
The Red LED will flash 10 times rapidly.
Key bypass programmed.
The Blue LED will flash rapidly.
CAN-Bus programmed. -
Press and release the Push-toStart button once to shut off the ignition.
The Blue LED will turn off.
The module is now programmed.
Use the remote of the remote starter / security system to test all the
supported features and ensure all the features are properly programmed.
REMOTE STARTER FUNCTIONALITY
| | |
---|---|---|---
Remote start the vehicle.| Enter the vehicle with the Smart-Key.| Press the
Push-toStart button twice to turn ON the ignition.| The vehicle can now be put
in to gear and driven.
www.fortinbypass.com
Module label
Notice: Updated Firmware and Installation Guides
Updated fi rmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest fi rmware
and download the latest installation guide(s) prior to the installation of
this product.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever.
It is the sole responsibility of the installer to check and verify any circuit
before connecting to it. Only a computer safe logic probe or digital
multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no
liability or responsibility whatsoever pertaining to the accuracy or currency
of the information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN ELECTRONIC
SYSTEMS assumes no liability or responsibility whatsoever resulting from any
type of installation, whether performed properly, improperly or any other way.
Neither the manufacturer or distributor of this module is responsible of
damages of any kind indirectly or directly caused by this module, except for
the replacement of this module in case of manufacturing defects. This module
must be installed by qualifi ed technician. The information supplied is a guide
only. This instruction guide may change without notice. Visit
www.fortinbypass.com to get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT
PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
www.fortinbypass.com ADDENDUM GUIDE
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>