Mossloo Industrial Light Up MagClick Fast Wireless Charger/Holder Instruction Manual
- June 5, 2024
- Mossloo Industrial
Table of Contents
Mossloo Industrial Light Up MagClick Fast Wireless Charger/Holder
Features
- Wireless Charging Surface
- Type-C Input Port
- Phone holder
- Light Up Panel / LED Indicator
What’s included
- 1x Wireless Charging Pad
- 1 x USB to Type-C Cable
- 1x Instruction Manual
Tech Specifications
- Input power: 9V/2A
- Output power: 5W/7.5W/10W
INSTRUCTIONS
Wireless Charging Mobile phones and other electronic devices:
- Connect the provided USB to the Type C cable Type C input port (2), then connect the USB tip of the cable to a power source. Light up panel/ LED indicator(4) will flash WHITEthree times, and then glow WHITE to indicate the wireless charger is in standby mode and ready to begin charging.
- Place the wireless charging supported mobile device on the wireless charging surface(1), LED will breathe WHITE when the device is charging.
- The phone will begin to charge automatically.
- Once fully charged remove the device.
Note: When wireless charging, if the LED indicator flashes WHITE alternately, the device is either NOTa wireless charging device or there is an object between the the device and charging surface interfering with the charging process.
Wireless Charging with Magnetic Surface:
- If your wireless charging compatible device contains magnets, it would just lick to the magnetic surface(1) of the pad for better alignment to secure wireless charging.
- This item is also compatible with other items, the magnetic function just won’t work.
SAFETY PRECAUTIONS
Read all the instructions before using the product.
WARNING-When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
- Do not expose the device to fire or excessive temperatures. Exposure to fire or temperatures above 104°F (40°C) may result in an explosion.
- To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger and lead to overheating. Please remove attachments from the phone before charging on this device.
- The strong magnetic fields of neodymium magnets can damage items such as television, computer monitors, credit cards, bank cards, computers, diskettes and other data carriers, video tapes, mechanical watches, hearing aids, loud speakers, and VCRs. Pace-makers may be damaged or switch to “Test Mode” in the presence of a strong magnetic force, if a pace-maker or other electrical body implant is in use, keep a minimum of 3 feet distance.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Any
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>