Shenzhen Mossloo Industrial EPB-BM20 Bamboo 5000mAh Dual Port Power Bank with Wireless Charger Instruction Manual

Shenzhen Mossloo Industrial EPB-BM20 Bamboo 5000mAh Dual Port Power Bank

with Wireless Charger

In the Box

• EPB-BM20 Bamboo 5000mAh Dual Port Power Bank with Wireless Charger (x1)
• Power Cable (x1)
• User Manual (x1)

Safety Precautions

• This product is NOT a toy, keep away from children and pets.
• Only use the device according to the instructions in this manual.
• Never use the device for anything other than its intended purpose.
• Do not open this device or attempt to repair the unit yourself if it is not working properly. Doing so risks fire, shock, or injury.
• When not in use, the device should be stored in a dry, cool location, away from sources of water or heat.
• Do not expose the device or power cable to extreme temperatures (heat or cold), open flames, or humid or wet conditions.
• Do not submerge in water.
• Do not use it in a location where the device or power cable could fall into the liquid.
• Unplug the charging cable when not in use.
• Do not pull the charging cable to disconnect, or use the cable as a handle.
• Do not use it if the device or power cable is damaged. If a device or power cable is damaged, it MUST be serviced or replaced by the manufacturer or its service agent before using it again.
• Low battery may cause dysfunction.
• Do not overcharge the battery.
• This device contains a built-in battery and should not be disposed of with regular household waste.
• Please consult the local authorities on the correct way to dispose of this device. Attachments on the back of your device can impede the effectiveness of the wireless charger, and lead to overheating. Remove attachments from your device before charging on this wireless charger.

Product

Features

1. Wireless Charging Surface
2. Micro USB Input Port
3. USB-A Output
4. LED Indicators
5. ON/OFF Button

Instructions

Charge the power bank fully before usage.

Charging the Power Bank

Connect the provided power cable to a power source and to the micro USB port on the power bank. The LED indicator will flash while the power bank is in charging and stay solid when the power bank is fully charged.

Charging mobile phones and other electronic devices

• Using the cable of the device you wish to charge, connect the charging cable to your mobile phone/device with the appropriate connector and the USB-A end to the USB-A output of the power bank.
• The LED indicator will illuminate when charging.
• Remove the USB cable from your mobile phone/device when it is fully charged.

Wireless Charging Instruction

• Press the ON/OFF button to turn on the wireless charging function. The LED Indicator will glow GREEN indicating the power bank is in wireless charging standby mode.
• Place a wireless charging-enabled device on the charging surface, the device will begin to charge automatically. The LED will glow RED while the device is charging. Note: If the LED indicator is flashing when the wireless charger is in use, either the device is NOT wireless charging enabled, or there is an object between the device and charging pad interfering with the charging process.

Tech Specifications

• Battery Capacity: 5000mAh/3.7V 18.5Wh
• Micro USB Input: 5V/2A
•  USB-A Output: 5V/2A (Total Max)
•  Wireless Output: 5W

FCC Information

This device complies with Part 15 of the FCC Rules. Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>