Mossloo MSL-M2011Q Wireless Power Bank Instruction Manual
- June 5, 2024
- MOSSLOO
Table of Contents
Mossloo MSL-M2011Q Wireless Power Bank
Features
- Powerbank ON/OFF Button USB Output
- Micro-USB Input
- Type-C Input
- LED Indicator
- Wireless Charging Surface
What’s included
- 1 x 4,000 mAh Wireless Power Bank
- 1 x USB to Micro-USB Charging Cable
- 1 x Instruction Manual
tech specification
- 4000mAh/3.7V/14.8Wh
- Micro-USB input:DC 5V/2A
- Type-C input:DC 5V/2A
- USB A output:DC 5V/2A
- Wireless output:5W
LED Indicators
- Press the Powerbank ON/OFF Button(1) once to view the remaining power capacity.
- Press the button twice to turn OFF.
Instructions
-
Charging the Powerbank:
Charge the powerbank fully before usage. Connect the provided charging cable to a power source and to the micro-USB Input port(3) or Type-C Input(4) on the powerbank.
Once connected the LED Indicator(5) will -
BLUE color when charging,
once fully charged, BLUE LED will stop -
Charging Electronic Devices with the Power Bank:
Connect the charging cable to your mobile phone/device using the appropriate connector.
Connect the USB part of the cable to the USB Output(2) port, the LED Indicator will illuminate BLUE when charging.
Remove the charging cable from your mobile device when it is fully charged. Charging Electronic Devices with the Wireless Charging:
Press the Powerbank ON/OFF button(1) to turn on the wireless charging function, LED indicator will glow green when in standby mode.
Place wireless charging supported mobile device on the wireless charging surface(6). The device will automatically begin to charge, LED will glow red when device is charging.
Note: When wireless charging, if the LED
NOT a wireless charging device or there is an object between the device and charging surface interfering with the charging. process.
SAFETY PRECAUTIONS:
- WARNING-When using this product, basic precautions should always be followed: Read all the instructions before use. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C).
- Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- The unit will only achieve full performance after 2 or 3 completed charge and discharge cycles.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the
- Do not use the device if damaged or
- Do not disassemble the device. For professional. incorrect reassembly may or temperatures above 104°F may cause explosion.
- use only identical replacement parts to ensure product safety.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating.
- Please remove any attachments from the phone before charging on this device, attachments can interfer with wireless charging and lead to over heating.
FCC Informat on
This device complies with Part 15 of the FCC Rules.
Caut on: Any changes or modifications not expressly approved could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to whic the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2)2) th device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>