SEGWAY S01M34000001 T-BOX ORV Power Supply Switch User Manual
- June 5, 2024
- Segway
Table of Contents
T-BOX User Manual
Version
version| date| author|
Revise the reason
---|---|---|---
1.0.0| 2019-12-19| mengran.Guo| first edition
1.0.1| 2020-3-9| Xinhua. wu| Add structure dimension description
1.0.2| 2020-4-27| Jie.Zhao| Revise some module parameters
1.0.3| 2020-6-2| Xinhua. wu| Add certification requirements and reliability
testing requirements
1.0.4| 2020-6-5| Jie.Zhao| Revision of 4G module parameters
| | |
Product introduction
T-BOX contains 4G networking, Bluetooth, GPS, 6 axis attitude solution, magnetic compass, mass storage, and encryption functions. As an ORV power supply switch, the T-BOX can be used to power up and down the vehicle through remote unlocking of the network, or it can be used to power up and down the vehicle through Bluetooth.TBOX obtains vehicle information through CAN interface and reports vehicle and its own running status and location information tracking to realize real-time monitoring of the vehicle.
Notes
There is no battery inside the T-BOX, so it should be continuously powered.
Basic parameter characteristics
The parameter name|
indicators
---|---
size| 85mm85mm43mm
The input power| DC:12V
The power consumption of the product| Working state| 12V@250mA
Low power state| 12V@5mA
Waterproof level| IP67
Working temperature| -30℃~+85℃
A detailed description of hardware
5.1. RF parameters
Item|
parameters
---|---
Hardware version| EC25-EUX(Europe / Middle East / Africa / Korea /
Thailand) EC25-AFX(North America)
EC25-AUX(South America/ Australia,/New Zealand) EC25-J(Japan)
EC21-KL(South Korea)
EC25-MX(Mexico)EC20-CE(China / India)
technical characteristics| LTE CAT4/UMTS/EGPRS
**** Working frequency band| EC25-EUX:
LTE FDD: B1/B3/B7/B8/B20/B28A LTE TDD:B38/B40/B41
WCDMA: B1/B8 GSM: B3/B8 EC25-AFX:
LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71 WCDMA: B2/B4/B5
EC25-AUX:
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28 LTE TDD: B40
WCDMA: B1/B2/B4/B5/B8 GSM: B2/B3/B5/B8
EC25-J:
LTE FDD: B1/B3/B8/B18/B19/B26 LTE TDD: B41
WCDMA: B1/B6/B8/B19 EC21-KL:
LTE FDD:B1/B3/B5/B7/B8 EC25-MX:
LTE FDD: B2/B4/B5/B7/B8/B66 WCDMA: B2/B4/B5
EC20-CE :
LTE FDD: B1/B3/B5/B8
LTE TDD: B34/B38/B39/B40/B41 WCDMA: B1/B8
TD-SCDMA: B34/B39 CDMA: BC0
GSM: 900/1800MHz
GSM features| EDGE: 296Kbps (DL)/ 236.8Kbps (UL) GPRS: 107Kbps (DL)/
85.6Kbps (UL)
---|---
UMTS features| DC-HSDPA: 42Mbps (DL) HSUPA: 5.76Mbps (UL) WCDMA:
384Kbps (DL)/ 384Kbps (UL)
LTE features| LTE FDD: 150Mbps (DL)/ 50Mbps (UL) LTE TDD: 130Mbps
(DL)/ 30Mbps (UL)
**** Transmitting power| GSM850/GSM900:33dBm±2dB DCS1800/PCS1900
:30dBm±2dB WCDMA:24dBm+1/-3dB LTE-FDD /LTE-TDD :23dBm±2dB
Receiving sensitivity| LTE:-102.5dB–99dB WCDMA:-110dB
GSM850/EGSM900/DCS1800/PCS1900: -109dBm
Network protocol| TCP/UDP/PPP/FTP/FTPS/HTTP/HTTPS/NTP/PING/QMI/NITZ/
MMS/SMTP/SSL/MQTT/FILE
5.2. GPS parameters
Item|
parameters
---|---
Model| MT3333
**** Receiving sensitivity| Tracking navigation mode:-167dBm Capture
mode:-148dBm Recaptured mode:-161dBm
Horizontal positioning accuracy| Independent positioning:<2.5m CEP
Speed precision| <0.1m/s
Time precision| 1ns
Startup time| Recapture time:<1s
First setting time @-130dBm Use the EASY™ technology: cold boot:<15s warm
start:<5s
First setting time @-130dBm Do not use EASY™ technology: cold boot:<35s warm
start:<30s
dynamic property| maximum altitude: 18000m maximum speed: 515m/s maximum
acceleration: 4G
Type of antenna| internally installed
5.3. BLE parameters
Item | parameters |
---|---|
BLE Chip | NRF51802 |
Frequency | 2.4GHz |
Receiving sensitivity | -91dBm |
5.4. Other technical parameters
Item | parameters |
---|---|
**** main processor | STM32F412VET3: |
Core: Cortex-M4
Flash memory: 512K bytes Ram: 256k bytes Frequency: UP to 100Mhz
Six-axis sensor| acceleration:±2/±4/±8/±16 g full-scale angular
velocity:±125/±245/±500/±1000/±2000 dps full scale
magnetometer| 1°to 2°Degree Compass Heading Accuracy
CAN| 2Mbps
5.5. Detailed description of hardware interface
5.5.1.Power interface
- Input voltage DC 12V, peak current 1A
- short-circuit protection
- reverse connect protection
- Power consumption intelligent management
5.5.2.CAN
- communication baud rate: 500 KBPS, highest support 2 MBps
5.5.3.Debug interface
- MCU debug serial port: can be used to configure the equipment parameters and equipment upgrade, local log printing devices
- EC25 debug serial port: print EC25 log
- bluetooth debugging interface: log printing equipment, printing EC25 log
- cloud debugging interface
Structural dimension description
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Industry Canada (IC) Compliance Statement for Canada
This device contains licence-exempt transmitter(s) that comply with
Innovation, Science, and Economic
Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with minimum distance 20cm between the
radiator and your body.
Neither Segway Technology Co., Ltd. nor Ninebot is responsible for any changes
or modifications not expressly approved by Segway Inc. or Ninebot. Such
modifications could void the user’s authority to operate the equipment.
T-BOX (model NB-ORBOXC12)
FCC ID:2ALS8-OR0001 IC:22636-OR0001
Contains FCC ID: XMR201909EC25AFX IC: 10224A-2019EC25AFX
Important WEEE information
**** WEEE Disposal and Recycling Information Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycling it responsibly promotes the sustainable reuse of materials resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Battery recycling information for the European Union
**** Batteries or packaging for batteries are labeled in accordance with
European Directive 2006/66/EC and amendment 2013/56/EU concerning batteries
and accumulators and waste batteries and accumulators. The Directive
determines the framework for the return and recycling of used batteries and
accumulators as applicable throughout the European Union. This label is
applied to various batteries to indicate that the battery is not to be thrown
away, but rather reclaimed upon the end of life per this Directive.
In accordance with the European Directive 2006/66/EC and amendment 2013/56/EU,
batteries and accumulators are labeled to indicate that they are to be
collected separately and recycled at end of life. The label on the battery may
also include a chemical symbol for the metal concerned in the battery (Pb for
lead, Hg for mercury, and Cd for cadmium). Users of batteries and accumulators
must not dispose of batteries and accumulators as unsorted municipal waste,
but use the collection framework available to customers for the return,
recycling, and treatment of batteries and accumulators. Customer participation
is important to minimize any potential effects of batteries and accumulators
on the environment and human health due to the potential presence of hazardous
substances.
Before placing electrical and electronic equipment (EEE) in the waste
collection stream or in waste collection facilities, the end-user of equipment
containing batteries and/or accumulators must remove those batteries and
accumulators for separate collection.
Restriction of Hazardous Substances (RoHS) Directive
This Ninebot (Changzhou) Tech Co., Ltd. product, with included parts (cables,
cords, and so on) meets the requirements of Directive 2011/65/EU on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment “( RoHS recast” or“ RoHS 2”).
Radio Equipment Directive
Segway Europe BV, Hogehilweg 8, 1101 CC Amsterdam, The Netherlands.
Hereby, Ninebot (Changzhou) Tech Co., Ltd, declares that the wireless
equipment listed in this section is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
Bluetooth | Frequency Band(s) | 2.4000 2.4835GHz |
---|---|---|
Max RF Power | 20mW |
Segway-Ninebot
( Tel / +86-010-8482 8002 )
Add / 1F Al BLDG., ZGC Dongsheng Science Park (Northern Territory).
66 Xlxiaokou Rd. Hallan Dist. Beijing. China
www.segway.com
www.ninebot.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>