SEGWAY 051405E Ninebot Kick Scooter Instruction Manual
- June 2, 2024
- Segway
Table of Contents
Ninebot eKickScooter
Product Manual
Diagram
Dashboard & Power Button
Power Button: Press the button to power on the scooter; press and hold the
button for 2 seconds to power it off. When the scooter is on, press the button
to turn on/off the headlight and taillight, and press twice to switch among
the four speed modes.
Speedometer: It displays the current speed of the scooter during riding, and
displays the battery power during charging.
Walk Mode: The headlight and tail light are always on and can’t be turned off.
Speed Mode: There are 4 modes available. The speed limit and ranges of each
speed mode are as follows:
| Model Mode | Speed limit | **Ranges*** |
|---|---|---|
| 051405E | 051405D | 051405E |
| D (Standard mode) | 15 km/h (9.3 mph) | 15 km/h (9.3 mph) |
40 km (24.9 miles)
E (ECO mode)| 20 km/h (12.4 mph)| 20 km/h (12.4 mph)| 35 km (21.7 miles)| 35
km (21.7 miles)
S (Sport mode)| 25 km/h (15.5 mph)| 20 km/h (12.4 mph)| 27 km (16.8 miles)| 35
km (21.7 miles)
(Walk mode)| 5 km/h (3.1 mph)| N/A
- Ranges of Speed Modes: tested while riding with a full battery, 75 kg (165 lbs) load, 25 °C (77 °F), at the max. speed of each speed mode on average on pavement.
Left Direction Indicator: When this icon blinks, it indicates that the direction indicators on the left side are turned on.
Right Direction Indicator: When this icon blinks, it indicates that the direction indicators on the right side are turned on.
Error Notification: It indicates that the scooter has detected an error. Please check the error code via Segway-Ninebot app.
Temperature Warning: It indicates that the temperature of the battery, controller or motor is too high or too low. Please check the device temperature via Segway-Ninebot app. - At this point, the scooter cannot accelerate normally and may not be charged. Do not use until the temperature has reverted to the normal range.
Bluetooth: It indicates that the scooter has been successfully connected to the mobile device.
Battery Level: The total battery power equals 5 bars. - The battery power is very low when the first battery bar is red. Please charge your scooter immediately.
Locking Reminder: When the icon lights up, it means the scooter is locked. If abnormal movements are detected, the scooter will start beeping and the tail light will falsh.
Specifications
| Item| Parameter
---|---|---
Product| Name| Ninebot eKickScooter E2 Pro
Model| 051405E| 051405D
Length × Width × Height| Approx. 1168 × 540 × 1220 mm (45.9 × 21.2 × 48 in)
Folded: Length × Width × Height| Approx. 1168 × 538 × 565 mm (45.9 × 21.1 ×
22.2 in)
Net Weight| Approx. 18.8 kg (41.4 lbs)
Rider| Max. Payload| 100 kg (220 lbs)
Recommended Age| 16+
Required Height| 140–200 cm (4’5”–6’5”)
Machine| Max. Speed| Approx. 25 km/h (15.5 mph)| Approx. 20 km/h (12.4 mph)
Range at Max. Speed [1]| Approx. 27 km (16.8 miles)| Approx. 35 km ( 21.7
miles)
Max. Slope[2]| Approx. 18%
Traversable Terrain| Mostly smooth roads or normal asphalt, tarmac roads
-10–40°C
Operating Temperature| (14–104°F)
Storage Temperature| -10–50°C (14–122°F)
IP Rating| IPX4
Duration of Charging| Approx. 5.5 h
Battery| Nominal Voltage| 36 V
Max. Charging Voltage| 42 V
Charging Temperature| 0°C–45°C (32–113°F)
Nominal Energy| 275 Wh
Nominal Capacity| 7650 mAh
Battery Management System| Protection against overvoltage/undervoltage/short
circuit/overcur- rent/over temperature
Motor| Nominal Power| 0.35 kW, 350 W
Max. power| 0.75 kW, 750 W
Charger| Model| NBW41D001D7D
Output Power| 70 W 100-240
Input Voltage| V~ 50-60 Hz
Max. Output Voltage| 42 V
Rated Output| 41 V 1.7 A
Tire| Tires| 10-inch air-leakage-proof tubeless pnematic tires
Recommended Tire Pressure| 45 3 psi
[1] Range at Max. Speed: tested while riding with a full battery, 75 kg (165
lbs) load, 25 °C (77 °F), at the max. speed on average on pavement.
- Some of the factors that affect range include speed, load, number of starts and stops, ambient temperature, etc.
[2] Max. Slope: tested while riding with 70% (±10%) battery, 75 kg (165 lbs) load, at a speed of 15 km/h (9.3 mph) climbing up a 10 m long slope ( the speed greater than 6 km/h (3.7 mph) when passing through the slope).
Certifications
This product is certified to ANSI/CAN/UL2272 by SGS.
The battery complies with UN 38.3.
The battery complies with ANSI/CAN/UL2271.
European Union Compliance Statement
Important WEEE information
This symbol on the product or on its packaging indicates that used electrical
and electronic products should not be mixed with unsorted municipal waste. For
proper treatment, it is your responsibility to dispose of your waste equipment
by arranging to return it to designated collection points.
Disposing of this product correctly will help save valuable resources and
prevent any potential negative effects on human health and the environment,
which could otherwise arise from inappropriate waste handling.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with your national legislation.
Please contact your local authority for further details of your nearest
designated collection point.
Battery recycling information for Users
This symbol means that batteries and accumulators, at their end-of-life,
should not be mixed with unsorted municipal waste.Your participation is an
important part of the effort to minimize the impact of batteries and
accumulators on the environment and on human health. For proper recycling you
can return this product or the batteries or accumulators it contains to your
supplier or to a designated collection point.
Disposing of this product correctly will help save valuable resources and
prevent any potential negative effects on human health and the environment,
which could otherwise arise from inappropriate waste handling.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with your national legislation.
there are separate collection systems for used batteries and accumulators.
Please, dispose of batteries and accumulators correctly at your local
community waste collection/recycling center.
Radio Equipment Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of the Radio Equipment Directive 2014/53/EU.
Restriction of the use of certain hazardous substances (RoHS) Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares the whole product including
parts (cables, cords, and so on)meets the requirements of RoHS Directive
2011/65/EU and amendment Commission Delegated Directive (EU) 2015/863 on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment (“RoHS recast” or “RoHS 2.0”).
Machinery Directive
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product listed in
this section comply with the essential requirements and other relevant
provisions of the Machinery Directive 2006/42/EC.
**** EU Authorised Representative:
Segway-Ninebot Europe
Dynamostraat 7, 1014 BN Amsterdam, The Netherlands.
Ninebot (Changzhou) Tech Co., Ltd. hereby declares that the product model:
051405E, 051405D comply with the essential requirements and other relevant
provisions of the Radio Equipment Directive 2014/53/EU, the machinery
directive 2006/42/EC, and the RoHS Directive 2011/65/EU and amendment
Commission Delegated Directive (EU) 2015/863.
The declaration of conformity can be viewed at the following address: <https
://eu-en.segway.com/instruction-manuals>
| Bluetooth | Frequency Band(s) | 2.4000-2.4835GHz |
|---|---|---|
| Max. RF Power | 20mW |
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Trademark
Ninebot is the trademark of Ninebot (Beijing) Tech Co., Ltd; Segway, Powered
by Segway and Rider Design are trademarks of Segway Inc., App Store, Apple
logo, Apple, Apple Find My, AppleWatch, Find My, iPhone, iPad, iPadOS, Mac,
macOS and watchOS are trademarks of Apple Inc. IOS is a trademark of Cisco and
is used under license. Google Play and the Google Play logo are trademarks of
Google LLC. The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by manufacturer is under
license. Other trademarks and trade names are those of their respective
owners.
We have attempted to include descriptions and instructions for all the
functions of the KickScooter at the time of printing.
However, due to constant improvement of product features and changes of
design, your KickScooter may difer slightly from the one shown in this
document. Scan the QR code or visit the Apple App Store (iOS) or the Google
Play Store (Android) to download and install the App and then read the latest
version of Product Manual.
Please note that there are multiple Segway and Ninebot models with different
functions, and some of the functions mentioned herein may not be applicable to
your KickScooter. The manufacturer reserves the right to change the design and
functionality of the KickScooter product and documentation without prior
notice.
© 2023 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.
（※The Segway-Ninebot App can support KickScooter with built-in Bluetooth)
Common Failures
| Error code | Possible causes and solution |
|---|---|
| 10 | Dashboard communication is abnormal, please check the dashboard or related |
cables.
11| Phase A of motor current sampling is abnormal, please check controller.
12| Phase B of motor current sampling is abnormal, please check controller.
13| Phase C of motor current sampling is abnormal, please check controller.
14| Throttle hall sensor error, please check throttle handle, dashboard and
related cables.
15| Brake hall sensor error, please check brake handle, dashboard and related
cables.
18| The motor Hall sensor is abnormal, please check the controller.
21| Battery communication error, please check the controller.
23| The battery is the default serial number, please contact after-sales
service.
35| Serial no of the scooter is wrong, please contact after-sales service.
39| Battery temperature sensor is abnormal, please make sure the temperature
is between 14°F (-10°C) and 122°F (50°C), or contact after-sales service.
42| Motor not calibrated,please contact after-sales service.
45| The motor bus current amplifier circuit is abnormal. Please contact after-
sales service.
50| Motor phase loss, please check controller.
51| Controller over voltage, check if the vehicle charger is used or if the
vehicle is restarted.
52| The motor is stalled, please check whether it is overloaded.
53| The controller is over current, please check whether it is overloaded.
54| The controller is over current level II, please check whether it is
overloaded.
Wiring Diagram
Recommended Maintenance Schedule
To ensure safe riding, day to day care and regular maintenance are essential.
You, the owner, have control and knowledge of how often you use your scooter,
how hard you use it and where you use it. It is the owner’s responsibility to
perform regular checks and bring your scooter to authorized service center for
inspection and service. Please refer to the maintenance schedule below.
Note: This maintenance schedule charges a service fee.
Item| Component| Maintenance Method| Every 3 months| Every 6 months or every
310 miles (500 km)| After 2 years or the total mileage > 3107 miles (5000 km)
---|---|---|---|---|---
Mainframe
maintenance| Mainframe parts| In ate the tires to 50–55 psi.|
√
|
√
|
√
Tire pressure| Tighten the six screws xed with the handlebar and the
stem. The suggested torque is 5.5±0.3 N·m.|
|
√
|
√
Screws on the
stem top| Tighten the screw on the throttle. The suggested torque is 2.5±0.1
N·m.
Tighten the screws on the brake levers. The suggested torque is 5±0.1 N·m.
Tighten the screws on the stem top. The suggested torque is 1.7±0.1 N·m.|
√
|
√
|
√
Function Inspection| Hub motor| To accelerate and decelerate, check if the hub motor is stalled or has abnormal sounds.| |
√
|
√
Rear wheel maintenance| Check if the rear wheel is stalled or gets shaky, or the axis shaft is unbalanced.| |
√
|
√
Drum Brake| 1) Spin the rear wheel, it spins normally. The rear wheel shall
not stuck or make abnormal sounds.
Note: Slight noise does not affect riding safety. But if the drum brake makes
loud noises when you apply brakes, please contact customer service for
support.
2) Squeeze the brake lever, the rear wheel stops moving.| |
√
|
√
Ambient light| Check the ambient light and see if it lights normally.| |
√
|
√
Headlight| Check the headlight and see if it lights brightly.| |
√
|
√
Direction Indicators| Toggle the direction indicator switch to the left/right respectively, check if the direction indicators on the left/right side ash normally.| |
√
|
√
Dashboard| Power on the scooter, the dashboard works properly.| |
√
| √
Throttle| Press and hold the throttle, then release it, checking for
acceleration
and deceleration.| |
√
|
√
Fault detection| After connecting with the Segway-Ninebot app:
- Update the rmware to the latest version.
- Check if the noti cation of the corresponding error code and possible
causes will prompt when the scooter detects an error.| |
√
|
√
Charging| Charge the scooter:
- Check if the current battery power displays on the dashboard.
- Check the LED indicator on the battery charger.
Charging: red, Fully charged: green.| |
√
|
√
Buttons| Press or toggle the button 3 times without failure.| |
√
|
√
Steering| Test with left turns and right turns (the steering angle is 60°).
No resistance or lag when turning.| |
√
|
√
Important parts| Battery assembly| The battery need to be replaced when it is
charged and discharged for 500 times or the total mileage is more than 9320
miles (15000 km).
Note: It is recommended to charge once every 60 days for long-term storage.| |
|
√
Controller| It is required that original Segway-Ninebot parts shall be used
for
repairs and replacements.
Hub motor
Functional parts| Rear wheel assembly| It is required that original Segway-
Ninebot parts shall be used for
repairs and replacements.| | |
√
Throttle & Brake levers
Front fork assembly
Folding mechanism
Drum brake assembly
Dashboard
The manufacturer reserves the right to make changes to the product, release firmware updates, and update this manual at any time. Visit www.segway.com or check the Segway-Ninebot app to download the latest user materials. You must install the app, activate your KickScooter, and obtain the latest updates and safety instructions.
Original instructions
www.segway.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>