Ridgeway DISCO3210BA Rechargeable Trolley Speaker User Manual

Ridgeway DISCO3210BA Rechargeable Trolley Speaker

PRODUCT FEATURE

• Two-Support
• Way Memory Power Card Supplyinput,
•  AC and / FM Built-in radio
• 12V function battery ,
• With Audio input
• treble -Microphone
• ajustable volume/
• as well echo ajustable.
• And speaker
• volume/ bass/

Package Contents

• 1 x BT Speaker
• 1 x Wired Microphone
• 1 x Remote Control
• 1 x Power Adapter
• 1 xAudio Cable
• 1 x User Manual

CONTROL PANEL INSTRUCTION

1.  AC 110-240V POWER SUPPLY
2.  MICROPHONE INPUT
3.  MIC VOLUME-/+ CONTROL
4.  MIC ECHO CONTROL
5.  MAIN TREBLE VOLUME-/+ CONTROL
6.  MAIN BASS VOLUME-/+ CONTROL
7.  MAIN VOLUME-/+ CONTROL
8.  MEMORY CARD
9.  AUDIO MANUAL ADJUSTMENT
10.  RADIO ANTENNA
11.  MODE BUTTON
12.  RECORD BUTTON
13.  MICROPHONE FIRST
14.  SHORT PRESS TO THE NEXT SONG
15.  SHORT PRESS TO PLAY/PAUSE THE MUSIC
16.  SHORT PRESS TO THE PREVIOUS SONG
17.  RCA INPUT
18.  GUITAR VOLMUE-/+ CONTROL
19.  POWER ON/OFF
20.  LED LIGHT ON/OFF
21.  GUITAR INPUT

CAUTION: READ THISs MANUAL BEFORE OPERATING YOUR UNIT

1.  To assure the finest performance, please read this manual carefully
2.  Install this unit in a cool, dry, clean place, away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming(transformers, motors). To prevent fire or electrical shock, do not expose the unit to rain or water.
3.  Never open the cabinet. If something drops into the set, contact your dealer.
4.  Do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and the wires connected to other equipment. Never pull the wire itself.
5. Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
6.  Be sure to read the “ROUBLESHOOTING” section regarding common operating errors before concluding the unit is faulty.
7.  To prevent lightning damage, disconnect the AC power plug when there is an electrical storm.
8.  Since this unit has a built-in power amplifier, heat will radiate from the rear panel. Therefore, place the unit apart from the walls, allowing enough space above, behind and on the both sides of the unit to prevent fire and damage. Also do not position with the rear panel facing down on the floor or other surface.
9. Vibration generated by super-bass frequencies may cause images on a TV to be distorted, In such a case, move the unit away from the affected appliance.
10. This unit features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move this unit away from the TV set.
11.  If you hear distortion (i.e., unnatural, intermittent ammering, sounds) coming form this unit, reduce the volume level. Extremely loud playing of a movie soundtrack’s low frequency, bass-heavy sounds or similarly loud popular music passages can damage this speaker system.
12.  Secure placement or installation is the owner’s responsibility. shall not be liable for any accident caused by Improper placement or installation of speakers.

**INSTRUCTION

**

1.  MUTE BUTTON
2.  RANDOM PLAY BUTTON
3.  REPEAT BUTTONN
4.  RECORDING / PLAYING BUTTON
5.  VOLUME+ CONTROL
6.  LAST SONG/FM UPWARD ADJUSTMENT
7.  NEXT sONG/FM DOWNWARD ADJUSTMENT
8.  PLAY PAUSE/ FM SCAN
9.  VOLUME- CONTROL
10.  ALL SONG LOOP
11.  SOUND EFFECT
12.  CHOOSE SONG NUMBER

TROUBLESHOOTING

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>